Every year 67000 tons of food is wasted by Swedish retail stores. The waste implies financial losses for the retailer and it has a huge impact on the global environment. Reducing in-store food waste is thus a win-win situation for both retailers and society. The most effective way to reduce waste is primarily by optimizing the logistics of supply, but customers expect a store with a wide range of products and stuffed shelves. Thus there will always be products about to expire.

This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

The voltage level in the power grid varies due to variations in load and production. Normally these variations are manageable, but they may be excessively large during a disturbance. If the voltage is too high it may damage the equipment in the grid and too low voltages may cause problems like voltage instability. The magnitude of the voltage variation depends on the short circuit power capacity of the point of interest.This problem may become lore prominent due to automatic voltage regulation that acts on shunt reactors and shunt capacitors. When the shunt reactor is connected or disconnected to the grid it may cause such large changes in the voltage that the shunt reactor starts hunting.

The development of solar photovoltaic (PV) is increasing,with declining module prices and with a strongenvironmental profile. Policies are developed around theworld to achieve the targets set for renewable energy.In Helsingborg, the local power company Öresundskraft isworking with solar PV to achieve the goals of the city.With their vision: - Energy for a Better World and Powerfor the Region, their work with developing the local solarPV market is continuing and the next step is to create asolar PV policy. Today their offer is 1 SEK/kWh for theexcess electricity delivered to the grid.It turns out that compensating the customer is a vitalpolicy and it has to be dynamic to follow the decisions ofpolitics. The same survey shows indeed, thatenvironmental and technical part is of interest. Solar PVwill be supported locally to act on environmentalsustainability and locally produced electricity and withthis Öresundskrafts vision will be achieved..

Low Carb High Fat (LCHF) ses som en striktare variant av GI eller Atkins och är en diet riktad framförallt till personer som lider av det metabola syndromet, där man utesluter i princip alla kolhydrater för att undvika blodsockerhöjningar. Överviktiga och diabetiker som testat denna diet har både fått bättre blodfetter, viktnedgång samt ett förbättrat blodsocker men samtidigt finns det många motsträvare ? framförallt SNR (svenska näringsrekommendationer). Syftet med detta projekt var att visa effekterna hos friska, normalviktiga personer som genomgått en tre veckors dietperiod med LCHF kost. Hur vikten, blodfetterna samt det psykiska har påverkats.

The discharge from Lake Mälaren is regulated to keep the lake water level within limits set by a water decree. Despite this, in the year 2000 the lake water level rose above the upper limit. Studies conducted at the climate modeling unit Rossby Centre at the Swedish Meteorological and Hydrological Institute (SMHI) indicate that the inflow to the lake may increase in the future. A flood in the area will, among other things, strike infrastructure and residential districts.The aim of this study was to investigate the water levels of Lake Mälaren in future climates. In addition to this possible future expansion of the lake discharge though the sluice gates in order to keep water levels below limits set by the water decree and to prevent flooding of the shoreline were discussed.

During the 8th and 9th of January 2005 a devastating storm named Gudrun entered the south of Sweden and a big part of the forest owners got their forests damaged. The study objective was to investigate on which basis and how the affected forest owners made their managment decisions immediately after the storm and if there are any differences between different categories of forest owners. - Members ? non members in a forest owner association (FOA) - Resident owners ? non resident owners - Female and male forest owner The study is based on a questionnaire survey with the purpose to examine the most important counsellor and information channels of the forest owners. A total of 450 forest owners participated in the survey. Results show that all categories of forest owners prefer professional counselling rather than personal counselling.

Stress is something that has increased in recent decades among adolescents. Several reports indicate that young people today are more stressed because of the many demands they wear. They should be good in school, achievement expectations, get an education or job, make choices and think about their future. The purpose of our essay is that we want to explore and gain an understanding of how young people in the third grade in high school looks to stress. To conduct this study, we used a qualitative approach, by doing interviews with 10 high school students attending third grade at Västerviks gymnasium. The result we got out of the interviews was that young people experience stress differently, depending on their different as individuals. We found that there are different causes of stress, such as school, media, friends, demands from various quarters and choosing education.The interviews showed that some kind of stress was possible to handle for the adolescents, for instance by making schedule. Some stress from society was, on the other hand, more difficult to avoid..

Perfluorinated substances (PF) are environmental pollutants that are used to coat fibres of so called ?all weather clothes? to make them water resistant. PF are effectively spread through water. Waste water treatment plants (WWTPs) are a pollutant source of these substances. PF are poisonous to different kinds of organisms, and supposedly also to human beings, if concentrations are sufficiently high.Perfluorinated substances have been investigated at three waste water treatment plants in Stockholm during the 2000?s.

Detta examensarbete har utförts på uppdrag av Vidsel Test Range (VTR) som är en del av Försvarets Materielverk.På Vidsel Test Range testas och verifieras bl.a. jakt-, attack- och luftvärnsrobotar.Ett sätt som används för att simulera ett verkligt mål är att flyga ett obemannat fjärrstyrt flygplan, kallat målrobot. Från målroboten vinschas ett mål ut, kallat släpmål. Skott sker sedan mot släpmålet. Största anledningen till att använda sig av ett släpmål istället för att skjuta på målroboten är att kostnaden blir mindre.Projektets syfte var att återuppta utvecklingsarbetet av ett nytt släpmål baserat på en tidigare tillverkad del av höljet på släpmålet.

Today there are commercially available databases with active features, i.e. active mechanisms are available for development of information systems. But the usage of active mechanisms is low in practice. This is due to the insufficient methodological support in analysis and design for developing ECA rule based software. It has been proposed that one of the most suitable ways to tackle this problem is not to develop new methods but to extend existing methodologies.In this thesis an extension of the Object Modeling Technique (OMT) is developed, called OMT-A, which is able to model active rules.

The Swedish Armed Forces is a public institution and consequently obliged to follow Swedish and international legislation. Thus, they are subjected to contrarious demands from different actors operating in its high-technological and high-institutional environment: to be a legitimate institution and at the same time operate with a high level of efficiency. This thesis is conducted with the aim of investigating whether The Swedish Armed Forces' steering document for gender equality is used to achieve visible and quantifiable results or if the document constitute a medium for reverberating legitimacy. To answer the research question, we applied a critical discourse analysis on the relevant documents and on the conducted semi-constructed interviews with members from different levels and positions in the organizational hierarchy. Subsequently, we came to the conclusion that the Swedish Armed Forces manage the demands for efficiency and legitimacy, which are forced upon them from the technological and institutional environment, by talking about them.

This master?s thesis describes the development of a model of the catalystsystem aiming at control by an MPC. A well functioning model, which is suitable in control purpose, is important while emission legislation become more and more hard to fulfill for the car manufacturers. Much research has been done in the field of physical modeling of the system, but in this work a linear adaptive time discrete ARX-model is developed and validated.The systems tendency to change its dynamic during usage implies that the model must be adaptive. The developed model proved to be well functioning and shows promising conditions for the MPC design.

High-precision cutting in metal is very complicated, a lot of parameters affect the result: what geometries to be manufactured, surface roughness and tolerances to be achieved, batch size etcetera. When pull-broaching internal parts this might be even more important, than in any other cutting operation. Everything is machined in one single stroke and the general technology is built in to the tool, therefore big investments must be made to change the process. Milling for an example: one piece at a time is machined away, and a lot of parameters can be changed easily.It is very high pressure on the cutting-edge when the broach is cutting. To achieve the specified product and to avoid unnecessary toolwear it is essential to use the right cuttingfluid and the right cuttingspeed for an example.

Three main questions give the fundamental structure for this master thesis: 1) In what way is the notion of law being perceived in the following theologians respectively; David P. Scaer, Dietrich Bonhoeffer and Wolfhart Pannenberg? 2) In what way is the notion of law being perceived in the encyclical Veritatis Splendor? 3) Which similarities and divergences can be found in the respective expositions of the notion of law?For the purpose of comparison, I have employed four questions of analysis. These are: A) What is ?the law?? B) Is the law being effected, or is it working, in the world and if so - in what ways and for what purposes is it meant to serve? C) Does human beings have any capacities to understand and/or live in accordance to the law? D) Does the Gospel, perceived as the earthly life, actions, death and resurrection of Jesus Christ, effect any alteration with respect to the purpose, range, function or interpretation of the law?In order to better understand Roman-Catholic concepts of law, the treatise on law of Thomas Aquinas Summa Theologica is briefly presented.