Sökresultat:
368 Uppsatser om Heavy metals - Sida 6 av 25
Nedbrytning av vägar: Jämförelse mellan axlar med singel- respektive tvillingmontage
When designing roads it?s important to knowwhat loads will bedriven on it. The axles on heavy vehicles can either have super single tires ordual tires which, according to studies, damage the roads differently. The SwedishTransport Administration is developing an understanding for the character ofthese different kinds of axle and tire types on the loads induced on Swedishroads. In this thesis a field study was conducted to determine the distributionbetween axles with super single tires and axles with dual tires on heavy vehicles.A highway, a country road and a national road were investigated during thestudy.
Öppen dagvattenhantering i urbana miljöer :
Storm water causes a number of problems in our country, particularly in city environment with its surfaces of non-absorbing ground materials. At heavy rain falls there are floods due to lack of capacity in the drain system when meeting heavy water masses over a short time. When the drain system is overloaded huge water masses reach the recipient untreated and there causing disturbances in the aquatic ecosystem. Due to emissions from mainly traffic, industries and other human activities the storm water is polluted. Earlier the problem used to be solved technically, by increasing the capacity of the tubes and by construction of reservoirs to delay the floods peaks.
Together we can rock´n´roll : Status Quo- en studie av ett rockbands karriär
The main purpose of this essay is on one hand to try to find and explain the formula of success of the rock group Status Quo, and on the other to elucidate and explain the foundation and essence in the music made by Status Quo, but also to study how, if and why the foundation and essence have changed over the years. The method of investigation is partly based on a musical analysis of three albums from three different periods: Hello! (1973), Ain´t Complaining (1988) and Heavy Traffic (2002), and partly on a sociological study of the group?s career between 1962 and today, 2005.The first part of the essay concerns the period between 1962-1973 with an analysis of the album Hello!; the second part concerns the period 1974-1988 and the album Ain´t Complaining; finally, the third part concerns the years between 1989-2002 with an intensified analysis of the album Heavy Traffic. In the forth part of the essay I discuss the career of Status Quo from a sociological point of view.I run to the conclusion that the essence of Status Quo is the boogie-woogie comp on Fender guitar by Rick Parfitt, the riff on Francis Rossis´ Fender guitar in combination with the base, the piano and the drums. This has been the essence through all the years, even though it was more difficult to apprehend it during the 1980s.
Påverkande faktorer för grotens fukthalt
The aim of this study was to investigate how seasonal variations affect the quality of logging residues. The study was hosted by VIDA Energy.
Logging residues can be processed and transported within different systems. Today the dominant systems are chipping at landing and bulk transportation of logging residues. In these systems the handling of the logging residues are carried out in the same manner up to the landings.
Moisture content at the time of chipping is the primary quality parameter. Fine fractions of logging residues are strongly dependent on moisture content in storage.
Och då kommer jag osökt in på det här med alkohol En pilotstudie om hur distriktssköterskor använder AUDIT
Background: The district nurses profession has traditionally been health promotion. In order to find patients with excessive alcohol intake, district nurses use AUDIT. Research shows that health professionals find it difficult to face alcohol abusers in primary care. AIM: The aim is to describe how district nurses work with AUDIT. Method: Semi-structured interviews with six informants were carried out.
Axle Link - en kortslutningsskyddad säker DC-överföring
Denna examensrapport redogör för hur man kan få en kortslutningsskyddadoch säker inkoppling av en DC-länk mellan två skiljda elektriska system.Rapporten bygger på hur en lastbil ska kunna få en större säkerhet för attbibehålla sina elektriska bromsar om tex ett av bromssystemen tappar sinordinarie matning.Lastbilens bromssystem består idag av två skiljda elektriska system med ett 24volts strömförsörjande batteri vardera. Det ingår två stycken elektriskabromsar i varje system. Om det tex blir fel på en av bromsarna och dennapåverkar ett av systemen vill man kunna koppla bort denna enskilda bromsmed sitt system. Man vill även kunna försörja den fungerande bromsen somsitter i samma system via en så kallad Axle Link. Denna strömmatningslänksitter mellan två hjulpar på samma axel.I denna studie undersöktes möjligheten att realisera en kortslutningsskyddadoch säker DC-överföring via en Axle Link, i första hand med diskretakomponenter.
Analys och kontroll av hållfasthet på grenställsarm
The thesis was done in collaboration with EAB situated in Smålandsstenar. In the initial discussion faze on doing a thesis with them there was a need to analyze and ensure the strength of an existing product, cantilever racks. This included performing FEM calculations on a model and comparing the results with physical tests.EAB has two models of cantilever racks, a light duty and a heavy duty. Within the heavy duty model series there are five product variants that differ in both size and load capacity. We will be working with the product variant with a load capacity of 1000 kg/arm which is the variant that is in the middle of the series.When we started work on the thesis we did a literature study and couldn?t find any well defined methodology that integrates both product development and computer aided design analysis.
Kvalitetssäkring av hushållsnära avloppsfraktioner : vad kräver livsmedelsbranschen?
On-site sewage systems are common on the countryside of Sweden with approximately one million on-site systems installed. Due to insufficient function, these contribute significantly to the total discharge of phosphorus to rivers and lakes, causing eutrophication.
In order to reduce eutrophication and to fulfil one of the environmental quality objectives, the decision was taken by the Swedish Government in 2005 that 60 % of phosphorous in sewage sludge is to be recycled to arable land before 2015. To make recycling a reality, new solutions have to be found. Federation of Swedish Farmers (LRF) takes an active interest in this issue and has initiated this study.
One problem is that the food industry is sceptical towards recirculation due to the risks that products from sewage systems may contain pathogens, Heavy metals and unwanted chemical compounds, e.g.
Spridning av släckvattenpartiklar : En studie på spridning av partiklar genererade från brand
During a fire large amounts of particles and unhealthy agents occur. Polyaromatic hydrocarbons (PAH) and toxic metals are examples among many others. These agents have a capacity to bond to particles and when the fire is extinguished, the particles can be transferred with the extinguish water into the soil and to the groundwater.Recent studies in particles have been conducted. A study by Ulrika Iverfelt (2014) reviled that the particles from a fire contained large amounts of both PAH and metals, which is consistent with earlier analyses. Her column experiments with particles in the size ? 11 microns and ?100 microns in silica sand, reviled that the larger particles was immobilized because the transportation was influenced by sieving or physiochemical particle and surface interactions.The transport of the particles in soil and groundwater is regulated by two main mechanisms: physiochemical surface interactions and straining.
Validering av metoder för analys av Cu, Fe och Na i processvatten med AAS-grafitugn
Södra Cell Mörrum is one of the five paper pulp plants that are included in Södra Cell, and the paper pulp that is produced here is not only sold to Swedish paper mills. Most of the paper pulp is exported to different countries in Europe. In the manufacturing process the plant needs different kind of process water and there are guideline values for how much copper, iron and sodium this water is allowed to contain. Analyzes of this water is in the current situation done with an atomic absorption spectrometric instrument (AAS-instrument) with a flame. Measurements done with flame-AAS of samples that have concentrations near the guideline values for copper, iron and sodium, are not reliable. The reason for not being reliable is that the quantitation limits of these metals are higher than the limit values.
Godshantering med Scania Interactor
This thesis is about making a support for barcode readers and RFID readers on a computermounted in heavy vehicles. The computer has several applications designed for heavyvehicles such as an order handling application. The goal was to suggest an architecture toimplement a support for the readers. The architecture should be independent of whichmanufacturer who has made the reader hardware that was connected to the computer.At first a theoretically study was made around RFID technology and standards for thetransport and supply sector. Then the architecture was developed and a demo implementationwas made.The conclusion of this thesis is to implement support for barcode readers with a wedgeapplication.
The legacy of the mill : a metal polluted forest soil in Gusum
Soils in a metal contaminated site on Stångberget in Gusum in southeastSweden were investigated and compared to relatively unaffected soils a fewkilometres away. Pollution came from historical release of untreated flue gasesfrom a brass mill. The objective was to find information on how high the metalconcentrations are, if metals from the polluted soil affect the surroundings andif the metal contamination affects the microbial community. The soil wasinvestigated using several different methods, such as field XRF measurements,chemical analysis of metal, carbon and nitrogen content, pH, acid neutralizingcapacity, texture, soil depth, field leach tests, sequential extraction and microbialfunctional profiles. The study showed that copper and zinc concentrationswere above Swedish Environmental Protection Agency guidelines for lesssensitive land use on the entire investigated area.
Modellen och materialet
Tycho Hedéns Väg in Uppsala has evolved from being a through fare passage and highwayto the oversized road frame running through the city it is today. At the present time, dueto the relocation of the E4 highway east of Uppsala, Tycho Hedéns road creates a barrierbetween the north eastern area of Uppsala and the remaining parts of the city centre. Theroad is designed to endure heavy traffic and high speed limits, generating a surrounding urbanarea were inhabitants are complied to follow the standards set for a high traffic-accessibleenvironment. Furthermore, the heavy traffic has led to the turning of both urban roadsidesaway from the actual road. The aim of this project and proposal is to show the possibilities ofhow the innate features of Tycho Hedéns road can be used more advantageously to mend thecity area of Uppsala.
Utvärdering av olika sätt att hantera avloppsslam i Värmdö
Important issues for the local authorities are what to do with the sludge produced insewagetreatment plants. The tax for landfill leads to higher costs with 250 SEK/ton. On the 31December 2004 it will be forbidden to landfill sludge.In Sweden the yearly production of sludge is 240 000 tons, counted as DS. The phosphorouscontent is 3 % in sludge. The total yearly production of sludge gives 6000 tons of phosphorous.
Avfallshantering : På Härjeåns Nät AB, med fokus på energi- och materialåtervinning
This thesis was conducted at Mälardalen University in Västerås and Härjeåns Nät AB, mainly in Sveg. Härjeåns Nät AB is a network company that delivers electricity in Härjedalen municipality, Ånge Municipality, Ragunda and Bräcke municipality. The maintenance and dismantling of electricity and broadband networks generates a lot of waste. The purpose of this work is to present proposals on the management of the waste. The goal is that all of Härjeåns offices should have equal management for the waste and an overview of how to manage the various wastes.