When designing roads it?s important to knowwhat loads will bedriven on it. The axles on heavy vehicles can either have super single tires ordual tires which, according to studies, damage the roads differently. The SwedishTransport Administration is developing an understanding for the character ofthese different kinds of axle and tire types on the loads induced on Swedishroads. In this thesis a field study was conducted to determine the distributionbetween axles with super single tires and axles with dual tires on heavy vehicles.A highway, a country road and a national road were investigated during thestudy.

Storm water causes a number of problems in our country, particularly in city environment with its surfaces of non-absorbing ground materials. At heavy rain falls there are floods due to lack of capacity in the drain system when meeting heavy water masses over a short time. When the drain system is overloaded huge water masses reach the recipient untreated and there causing disturbances in the aquatic ecosystem. Due to emissions from mainly traffic, industries and other human activities the storm water is polluted. Earlier the problem used to be solved technically, by increasing the capacity of the tubes and by construction of reservoirs to delay the floods peaks.

The main purpose of this essay is on one hand to try to find and explain the formula of success of the rock group Status Quo, and on the other to elucidate and explain the foundation and essence in the music made by Status Quo, but also to study how, if and why the foundation and essence have changed over the years. The method of investigation is partly based on a musical analysis of three albums from three different periods: Hello! (1973), Ain´t Complaining (1988) and Heavy Traffic (2002), and partly on a sociological study of the group?s career between 1962 and today, 2005.The first part of the essay concerns the period between 1962-1973 with an analysis of the album Hello!; the second part concerns the period 1974-1988 and the album Ain´t Complaining; finally, the third part concerns the years between 1989-2002 with an intensified analysis of the album Heavy Traffic. In the forth part of the essay I discuss the career of Status Quo from a sociological point of view.I run to the conclusion that the essence of Status Quo is the boogie-woogie comp on Fender guitar by Rick Parfitt, the riff on Francis Rossis´ Fender guitar in combination with the base, the piano and the drums. This has been the essence through all the years, even though it was more difficult to apprehend it during the 1980s.

Most of the city of Uppsala rests on postglacial clay with a varying content of sulphur. The sulphur occurs naturally in the clay in reduced form as sulphide and the clay is for that reason usually called ?sulphide clay?. Excavation during construction activities gives rise to large amounts of excavation material, of which the sulphide clay is a considerable part.When the clay is exposed to air and water, an oxidation of the sulphides occurs which may produce an acid leachate and the mobilisation of Heavy metals bound in the clay or underlying material. The aim of the work has been to improve our understanding of the behaviour of sulphide clays and produce a basis for risk assessment in the future handling of excavation material with high sulphide content.

Storm water is defined as runoff from precipitation such as rain or snow. It is collected in sewage disposal systems and since it mainly originates from urban areas it can contain high levels of Heavy metals, nutrients and oil etc. Polluted storm water is currently treated by different methods such as wet ponds, constructed wetlands and filter strips. This study investigates these methods, which in earlier studies have shown to give varying results regarding their treatment efficiency.This thesis has been written on commission of SWECO VIAK and was aimed at studying those parameters that may affect the treatment efficiency of nutrients and Heavy metals in storm water treatment facilities (STF:s). Through literature studies the dominating treatment processes in ponds and wetlands were examined.

AbstractThe research project Liberation, supported by the European Commission under the Environment and Sustainable Development Programme (Fifth RTD Framework Programme) aimed at developing a decision support system for ecological risk assessment of contaminated sites has proposed a tiered system including the triad method. This method integrates contaminant chemistry and bioavailability analyses with observed ecotoxicological effects in soil and groundwater. In this study the triad method was used to perform a risk characterization of a former surface treatment and metal industry, now used for the student union buildings of the Mälardalen University in Eskilstuna, Sweden. On the site, high concentrations of copper, zinc and nickel have been detected in the soil in a preliminary investigation of contaminant levels with XRF. For performing the risk assessment of the site according to the triad method, contaminant bioavailability, soil metal concentrations and soil toxicity were determined and an ecological assessment was carried out on four selected soil samples (one reference soil and three samples with low (B), medium (C) and high (D) contaminant levels). Contaminant bioavailability was measured through leaching (ISO TC 190/S7) and biouptake tests (DGT).

In cooperation with the Gislaved company Lerocon AB [1], a separation module wasdesigned as a further supplement to the Module System. The aim of theprojectimplementation was that the separation module could be flexible enough to feed themetal pieces, screws, nuts and other items with large variations of size, appearance andmaterial composition. The module should also be cost effective to manufacture.A separation module is a design which is ment to streamline the work in industries withautomation of the lineoperations. The module feeds the details such as screws, nuts, washersand pieces of metal in a continuous flow in which traps separate the details from each other.Traps may vary depending on the purpose and of the details that are fed. Perhaps it isimportant for the user that the detail-orientation is right after the separation module, whichmeans that all the pieces witch aren´t are fed back in return.For companies and industries in lineoperations that can be made more efficient withautomation, are production flow an important watchword.

The aim of this study was to investigate how seasonal variations affect the quality of logging residues. The study was hosted by VIDA Energy. Logging residues can be processed and transported within different systems. Today the dominant systems are chipping at landing and bulk transportation of logging residues. In these systems the handling of the logging residues are carried out in the same manner up to the landings. Moisture content at the time of chipping is the primary quality parameter. Fine fractions of logging residues are strongly dependent on moisture content in storage.

Background: The district nurses profession has traditionally been health promotion. In order to find patients with excessive alcohol intake, district nurses use AUDIT. Research shows that health professionals find it difficult to face alcohol abusers in primary care. AIM: The aim is to describe how district nurses work with AUDIT. Method: Semi-structured interviews with six informants were carried out.

Welding is a common method for joining of metal or plastic construction parts. This report describes several different weld methods in general terms. The report focuses on the GMAW method, specifically MAG welding.A case study has also been performed for the company Wenmec. The task received from the company was to compare the mechanical properties of joints welded with the tube electrode called Nittetsu SM-3A and joints welded with the homogenous electrode called ESAB Aristorod 12.63. Both types of weld joint were welded with the MAG method with an Argon based shielding gas with 18% CO2.

It is important that the current urine separating systems are evaluated to allow improvements to be made and consequently increase their future propagation. In order to increase the knowledge about urine separating systems this study was made. It included, among other things, measurements of amounts of urine as well as of the composition of urine collected at Nytorgsgatan 4 in the city of Hallsberg. The study was increased after an inquiry that also included the district of Understenshöjden in the city of Stockholm. In the inquiry, the users were asked questions about odour, cleaning of toilets and occurrence of blockages in the urine water locks etc.

Denna examensrapport redogör för hur man kan få en kortslutningsskyddadoch säker inkoppling av en DC-länk mellan två skiljda elektriska system.Rapporten bygger på hur en lastbil ska kunna få en större säkerhet för attbibehålla sina elektriska bromsar om tex ett av bromssystemen tappar sinordinarie matning.Lastbilens bromssystem består idag av två skiljda elektriska system med ett 24volts strömförsörjande batteri vardera. Det ingår två stycken elektriskabromsar i varje system. Om det tex blir fel på en av bromsarna och dennapåverkar ett av systemen vill man kunna koppla bort denna enskilda bromsmed sitt system. Man vill även kunna försörja den fungerande bromsen somsitter i samma system via en så kallad Axle Link. Denna strömmatningslänksitter mellan två hjulpar på samma axel.I denna studie undersöktes möjligheten att realisera en kortslutningsskyddadoch säker DC-överföring via en Axle Link, i första hand med diskretakomponenter.

The thesis was done in collaboration with EAB situated in Smålandsstenar. In the initial discussion faze on doing a thesis with them there was a need to analyze and ensure the strength of an existing product, cantilever racks. This included performing FEM calculations on a model and comparing the results with physical tests.EAB has two models of cantilever racks, a light duty and a heavy duty. Within the heavy duty model series there are five product variants that differ in both size and load capacity. We will be working with the product variant with a load capacity of 1000 kg/arm which is the variant that is in the middle of the series.When we started work on the thesis we did a literature study and couldn?t find any well defined methodology that integrates both product development and computer aided design analysis.

The Arctic region appears as a pristine remote environment, yet there is increasing evidence that it is greatly impacted by pollution such as lead (Pb) and mercury (Hg). In this environment deposition of Hg has increased threefold since the last industrial revolution. In this study five cryosolic soil profiles within non-sorted circles (NSC) in the Abisko region, northwest of Sweden, has been analyzed to improve our understanding regarding how pollutants are distributed within such type of soil. The soil samples have been analyzed with the use of X-ray fluorescence analysis (XRF), for the measurements of the total concentrations of e.g. lead (Pb) and zirconium (Zr).

Our employer Camatec Industriteknik AB gave us the assignments to increase theirs range of versions on Camcoil that is their own patent product. Camcoil is a capstan system that is used when steel band fabricated. Exist for example in production lines their steel band should be annealed. Our goal with this work is to come up with a completed production basis on a Camcoil for heavy industry. The basis should contain calculations, 3D-constructions, drawings and cost proposal on manufacturing and detail purchase.Demands on this project:1.