This paper is based on a literature review and interviews made with managers in small-scale nurseries for pot plant production. The review helped to identify the worst occupational hazards in pot plant production. The interviews provided a way to investigate how the nurseries act so as to avoid the worst hazards and what they do to even out work intensive periods during the season in order to get a more even distribution of work over the year. According to available statistics problems with back and shoulders are the most common of the physical disorders and the risk for occupational accidents are high for greenhouse workers. Most of the occupational injuries are connected to musculoskeletal problems. The handling of material is often manual and involves frequent lifting and carrying of heavy loads, the strenuous work postures and static muscular tensions these repetitive tasks are associated with causes straining and overloading.

Equal treatment in school is an on-going debate in the Swedish society. At the same time teachers around the country struggles to make ends meet because of a heavy workload. Voices have been raised that teachers no longer have the time to actually be teachers since they get piled up with paper work and other administrative tasks. However, schools are bound by law to take action against harassments and discrimination of any kind. There is also an overall policy in the Swedish national curriculum that every school must embrace diversity and actively teach students about solidarity and respect.

Abstract"Citizen Influence, Forms and Effects - A study of the Resistance Concerning the Establishment of a Juvenile Detention Center in Kristinehamn 2005-2007"Political Science, Johan Utter This essay circles around the concepts of citizenship and the questions if and how citizens in the modern democracy can influence and effect the political decisions made by the governing body on the local level. This is done by the means of a case-study concerning the establishment of an institutional facility for convicted youths in Kristinehamn. The planning of this facility and especially its planned location in Sunneberg aroused a significant negative response from the citizens, demanding a better alternative for the location.The proposition resulted in heavy protests from the citizens as the planned location was viewed as an important recreation area, where the citizens could experience nature first hand, close to the centre of town. As a result, some citizens living close to the planned location, formed a network called "Bevara Sunneberg", whose purpose was to influence the decision-makers and make the citizen?s voices heard.

Authors: Sofia Eriksson and Malin Wändahl Title: To swim with sharks --? a qualitative study of female journalists work situation in Cape Town due to gender Level: Bachelor of Journalism. Autumn 2013 Location: University of Gothenburg Although the distribution of sex in the South African media houses is equal, research shows that the work conditions for women and men are unequal. Therefore, we have studied how the situation looks like beyond the statistics. The aim of our thesis is to examine, due to gender, how female journalists in Cape Town experience and cope with their work situation in a profession traditionally dominated by men.

AimThe general aim with the study was to investigate what the reasons for quitting and/or continuing with a sport are, using competitive sailing as an example.MethodsThe used method was partly a survey investigation of 20 people and partly deep interviews with 8 of the persons who responded to the survey investigation. The respondents in the investigated group are all former active sailors within the Aland Island Yacht Club. Half of the group have continued sailing actively since the optimist class and the other half have quit competitive sailing. In the survey 15 men and 5 women participated and in the deep interviews 4 men and 4 women participated. The survey covered a great age span.

The purpose of this study is to incrementally, through a combination of various methods, examine the assumptions about the working economic outcomes that can be made based on planned ergonomic intervention in a department at Pfizer Health AB in Strängnäs. The study contributes to knowledge about how assumptions on OSH financial results can be made, based on planned ergonomic interventions. These assumptions were based on biomechanical calculations made on the basis of ergonomics measurements with inclinometer. The study is important because previous research has shown that poor work environment have a bad impact on the economy of a company in different ways. It can for example be negative impact on the company's productivity and quality of the units produced or the services provided.

AbstractFalu Copper Mine and Sustainable DevelopmentKarl-Markus AnsnaesFalu copper mine was Sweden?s oldest mine industry which lasted for almost a thousand years. Throughout the history its area has been vastly contaminated by sulfur oxide. The contaminations has created the mining area to an environmental risk zone which has the ability to spread out into the Falu River. The river has its connections to the Dal River which is discharging towards its mouth in the Baltic Sea.

SammanfattningDet här projektet behandlar området Additiv Tillverkning (AM) för metalliska material och undersöker om det är lämpligt att använda vid produktion inom flygindustrin. AM är en relativt ny tillverkningsmetod där föremål byggs upp lager för lager direkt ifrån en datormodell. Teknikområdet tillåter i många fall större konstruktionsfriheter som möjliggör tillverkning av mer viktoptimerade och funktionella artiklar. Andra fördelar är materialbesparing och kortare ledtider vilket har ett stort ekonomiskt värde.En omfattande litteraturstudie har gjorts för att utvärdera alla tekniker som finns på marknaden och karakterisera vad som skiljer de olika processerna. Även maskiners prestanda och kvalité på tillverkat material utvärderas, och för varje teknik listas möjligheter och begränsningar.

The Yangtze finless porpoise (Neophocaena phocaenoides asiaorientalis), is a small freshwater cetacean which has recently fallen dramatically in number. It is an endemic species for the Yangtze River and unless drastic action is taken, it risks the same fate as the now functionally extinct Yangtze river dolphin (Lipotes vexillifer). Threats to the porpoise are diverse but they have in common that they are caused by man. Development of the river has been made to supply a growing human population with food, hydropower, and to reduce the risk of flooding. These changes have resulted in a degraded habitat for the porpoise.

This essay examines how public planners and the inhabitants of södra Gårda relate to the physical planning of the area and to the demolition versus the preservation of the quarters Eken and Cedern, and how the dialogue between planners and citizens appears to be. How do the planners and policymakers relate to citizen participation in urban planning, and how is participatory planning carried out in the legislation, rhetorically and in practice. Former research indicates a distinct gap between rhetorics, legislation and actions in practice regarding citizen participation in planning, which is why we find it an interesting topic for further research. The essay aims to highlight the different actors interests and visions of the development of the area. Which are the standpoints and arguments the different actors set out for the future visions of the area? The essay focuses on citizen participation in urban planning in the city of Gothenburg.

India is the country with the highest prevalence of rabies in the world, with about 20?000 human deaths occurring every year. The country also has a heavy burden of free roaming dogs, mainly because of the high amount of edible waste in the streets, which are the main hosts for the disease. Therefore to truly extinguish rabies, the main focus should be on the dogs, both stray dogs and owned. One method is to vaccinate all dogs against rabies.

With today`s business world, it is very important to deliver the right product with right quality and quantity at the right time. By ensuring that the staff are happy and have the opportunity to work in a workplace with good structure, the company will be able to reach these parameters and at the same time maximize the efficiency.The project has been carried out at Stena Stål AB in Värnamo. The company's main task is to cut, store and deliver production steel and tool steel to processing companies in the surrounding region. Stena Stål AB in Värnamo is one of total 21 companies in the company group Stena Stål. Stena Stål is a part of the Stena corporate group which owns a total of eight different company groups that are spread in about 250 different locations in 14 countries.The purpose of this report is to give Stena Stål AB in Värnamo suggestions on how to design a new facility for tool steel.

Never before have so many moved so frequently as now. Mobility lies at the centre for the concern ofstates, business and technological development. Some even claim that we are witnessing a mobility turn inthe social sciences. However, as the capacity to move has increased so too has the control and surveillanceof mobility become more extensive. Since September 11, 2001 security has been the defining paradigm fora variety for actors.

?Development of Norway spruce, Douglas fir beech and Scots pine with a larch shelter wood? is a report written by Per-Olof Magnusson. The thesis is a compulsory part of forest engineer program at ?Skogsmästarskolan?, SLU, Skinnskatteberg, Sweden. The purpose of this report is to describe and evaluate an experiment with hybrid larch (Larix x eurolepis) as shelter wood, and different tree species growth and survival depending on the density of the shelter wood. The experiment is conducted by southern Swedish forest research centre, faculty of forestry, SLU in Alnarp. The hybrid larch ought to be an interesting alternative to birch (Betula sp.) as shelterwood on suitable sites in southern Sweden.

SammanfattningDet här projektet behandlar området Additiv Tillverkning (AM) för metalliska material och undersöker om det är lämpligt att använda vid produktion inom flygindustrin. AM är en relativt ny tillverkningsmetod där föremål byggs upp lager för lager direkt ifrån en datormodell. Teknikområdet tillåter i många fall större konstruktionsfriheter som möjliggör tillverkning av mer viktoptimerade och funktionella artiklar. Andra fördelar är materialbesparing och kortare ledtider vilket har ett stort ekonomiskt värde.En omfattande litteraturstudie har gjorts för att utvärdera alla tekniker som finns på marknaden och karakterisera vad som skiljer de olika processerna. Även maskiners prestanda och kvalité på tillverkat material utvärderas, och för varje teknik listas möjligheter och begränsningar.