The industrialization in Sweden has increased the large number of areas that have been contaminated with various types of pollution. One of those sites are the property Höjen 3:24 in Arboga where ?Arboga Mekaniska Verkstad? once been. The property wants to increase the use of the old former foundry building with the adjacent ?plate-workshop? and believe there are two options for the building: That the building either should be used as a warehouse/concert hall, or rebuilt into a cultural center. An environmental evaluation has shown that the levels of Heavy metals are over the Swedish environmental protection agency guidelines of less sensitive land.

Mussel meal is a potential source of protein, with a good composition of amino acids, for laying hens and broiler chickens, and may replace the use of fish meal in organic poultry production. Lead and cadmium are Heavy metals which occur in the environment and can be accumulated in mussels. When poultry are exposed to Heavy metals, the metals are absorbed in the small intestine and distributed in the body in the form of ions, complexes or bound to proteins. In poultry, lead accumulates in bone tissue, liver and kidneys, while cadmium accumulates in liver and kidneys. Generally very low concentrations of these Heavy metals occur in muscles of broilers which have been exposed to feed contaminated with cadmium or lead.

Uppsatsen granskar det spänningsförhållande som existerar mellan Hårdrockens uttryck och den oinvigda allmänhetens moralpanik. Genom självpresentation och smakdistinktioner undersöker den också hur Hårdrocken idag har positionerat sig som en etablerad kultur med ursprung och tradition. På så sätt behandlar uppsatsen vad och vem som definierar Hårdrockens kulturella värde och position. Undersökningen görs genom en textanalys av den svenska hårdrockstidningen Close-Up Magazine. Uppsatsen granskar även hur tidningen positionerar och presenterar sig som betydande aktör inom Hårdrockens verksamhetsfält..

Min uppsats har visat på black metal-stilens betydelse för fyra ungdomars identitetsskapande. Jag har med koppling till teoretiska infallsvinkar och begrepp rörande stilars och kulturers betydelse diskuterat black metal-kulturen med fokus på dess stilmässiga uttryck, dess symbolanvändande och dess innebörd för ungdomarnas självbild.I min studie har jag diskuterat och redogjort för hur black metal-kulturen kan te sig genom att förklara hur musiken låter och hur stilens uttryck i form av kläder och frisyrer kan se ut. Uppsatsen har visat på hur symboler och kodsystem används av ungdomarna inom ramen för kulturen för att markera och positionera sin identitet. Jag har i min studie även visat hur black metal-stilen kan vara ett existentiellt ställningstagande mot kommersialism och mainstreamkultur..

The aim for this essay is to identify and distinguish the metal casting of Uppåkra during late Iron Age by examine related material that primarily consist of finds made with a metal detector. I intend to, by analysing maps, concentrations in the detector material and probable constructions within the settlement, find patterns that can indicate a metal casting activity. The results of the essay show that a number of concentrations can be seen and that they both indicate metalworking activities and to some degree a structural specialization in the settlement. The exclusive artefacts also indicate that Uppåkra was a settlement with over-regional functions when it comes to traditions dealing with metal casting..

AbstractSurface-water includes different kinds of pollutants from traffic and roads. To prevent these pollutants to reach nearby lakes one can construct surface-water ponds on locations with heavy traffic. At Bergviks shopping centre in Karlstad, two ponds, one smaller and one bigger has been constructed in order to decrease the pollutant pressure from the receiving waters of Kattfjorden. Several Heavy metals are essential for plants and animals in low concentration but when they occur in higher concentrations, they become toxic to the organism. The larger pond at Bergviks shopping centre has a sedimentation function so the Heavy metals sink to the bottom thereby not releasing directly in to Kattfjorden.

Detta examensarbete handlar om hårdrockssångares medvetenhet när det gäller sångteknik. Syftet med arbetet är att få kunskap om vilka tillvägagångssätt de har använt sig av när de skapat sitt sound och hittat sin teknik. Den teoretiska utgångspunkten för studien är det sociokulturella perspektivet. Tidigare forskning inom området behandlar traditionell röstlära, mer moderna sångskolor och socialkulturella normer gällande inlärning. Jag har använt mig av den kvalitativa forskningsintervjun som metod och mina informanter är verksamma inom området.

Bildsemiotik, semiotik, Metal, musikvideo, referenstolkning, subkultur, hårdrock.

Fortifikationsverket which is the landlord for the Swedish national defence has a great problem in their forestry due to the relatively large amount of metal objects in their timber. These metal objects cause different types of economical losses in the timber refinement chain. To enable out sorting of logs containing metal objects already in the harvesting phase, Fortifikationsverket is interested of the possibility to utilize some type of metal detector in a harvesting head for that purpose.The goal of this study was to, with help of a case study, enlighten the problem that metal objects in timber cause for Fortifikationsverket and their customers of timber and to investigate conditions of to mount and utilize some kind of metal detector in a harvesting head at present.The saw timber deliveries by Fortifikationsverket during the time period 2003-2005 was used as a reference volume for calculations of economical losses. In this case study was included two sawmills where timber from Fortifikationsverket were delivered to for further refinement. Factors investigated were the type of damage metal objects caused in these two sawmills and the economical signification of these damages.

This essay is about Late Iron Age settlement and its production. I want to define the nature ofthree different workplaces on Bornholm, Denmark, and compare them. My aim is to see if itis possible to define a workplace through the traces of the craftsmanship. Several materials areselected in this essay and the analysis provides different perspective on workplaces in the LateIron Age in Scandinavia. The results of the analysis between the three workplacesAgerbygård, Baggård and Kanonhøj shows that Baggård have more traces of melting of bronsthan any other of the places.

In the following study I probe the social world of hard-rock music. By conducting interviews with four young male enthusiasts of this music I try to develop a general picture of this social world, as well as of the basic elements on which this particular subculture is constructed. The identity of a hard-rocker is based upon a number of factors beyond just a preference for that music. Throughout the interviews I encountered many implicit norms that one must followed in order to be able to see oneself as a true hard-rocker. I also found that from the respondents? perspective, the mainstream culture has, throughout the history of metal music, used various ways to counter the spreading of this genre.

Four different kinds of filter-materials with reactive surfaces have been studied concerning their capacity to absorb Heavy metals in leachate from a municipal waste deposit. The Heavy metals studied were: lead, cadmium, copper, mercury, chromium, nickel and zinc. The leachate contains high levels of dissolved organic carbon (DOC) and has a high pH-value along with a high buffer capacity. These characteristics of the leachate make it difficult to remove pollutants and require efficient filters. The filters that were examined in the report are blast-furnace slag with CaO, sand covered with iron oxides, olivine and nepheline.

This thesis has been done in collaboration with Höganäs Digital Metal. Höganäs Digital Metalwork with 3D printing of metal and need giveaway components that they can give tocustomers to show their development process.By making a parametric CAD model can we generate about 200 different designs of a?Höganäs brännvinskrus? in miniature. You can choose between different items that shouldbe in it and a variety of perforations to look into it..

A major issue that has been a subject for quite some time is whether there will be a scarcity of metals in the bedrock in the future and whether or not we might end up with a problem similar to that of the big oil crisis in the mid-seventies. Following the oil crisis many oil companies started up with risk management to control future risks. This work presents how Swedish mining companies work with risk management to handle risks that might come up in the future due to metal scarceness. How Swedish mining companies look at the possible metal scarceness and if they use risk management in their decision-making process is studied. By doing interviews with Swedish owned mining companies it was found that the mining companies did not see the future metal scarcity as a risk, even though 2/3 of the companies acknowledged the scarceness to be a reality.

A major issue that has been a subject for quite some time is whether there will be a scarcity of metals in the bedrock in the future and whether or not we might end up with a problem similar to that of the big oil crisis in the mid-seventies. Following the oil crisis many oil companies started up with risk management to control future risks. This work presents how Swedish mining companies work with risk management to handle risks that might come up in the future due to metal scarceness. How Swedish mining companies look at the possible metal scarceness and if they use risk management in their decision-making process is studied. By doing interviews with Swedish owned mining companies it was found that the mining companies did not see the future metal scarcity as a risk, even though 2/3 of the companies acknowledged the scarceness to be a reality.