Background: Nosocomial infections pose a big threat to patient safety and increased costs for society. An effective way of preventing cross-infections is to apply hygiene routines. Studies show that compliance to hygiene routines is low while there's a lack of knowledge about the best way of improving it. Aim: To investigate whether a conversation based on the Theory of Planned Behaviour (TPB) could influence a nurse's compliance to hygiene routines and whether it could benefit the understanding of a nurse's compliance. Method: A quantitative and qualitative method was used in the study and included one nurse.

This thesis has been made in cooperation with the forestry machinery producerEco-Log in Söderhamn. The focus of the thesis has been to find a cheaper wayto open the large engine hood of the company?s harvesters. The goal was tofind a solution that could increase the value for the customers by being saferand simpler to use, or, at the least, keep these values at an equal level comparedto the previous solution.In order to make it possible to CE-mark the new solution, it was importantMachinery Directive that came into effect from the beginning of 2010.To begin with, a specification of requirements was set up. Thereafter, anumber of different basic concepts was retrieved and evaluated.

Chlorinated solvent are volatile organic substances that can be harmful for humans and for the environment. Examples of common chlorinated solvents are perchloroethene, PCE, and trichloroethene, TCE. Chlorinated solvents appear as contaminants in soils primarily where they have been used as washing fluids in dry-cleaning facilities or as degreasers in metal industries. Chlorinated solvents are DNAPLs (dense non-aqueous phase liquids), which means that they are not easily dissolved in water and that they sink to the bottom of the aquifer. Adsorption to soils is low so chlorinated solvents are mobile in soils.

Many pedigree dogs are suffering from inherited diseases or personality disorders caused by selective breeding. The Swedish lapphund is a breed that has been suffering from some loss of genetic variation due to the heavy use of only a few males. Concerns have arisen and crossbreeding has been discussed as a way to manage gene loss. Four breeds has been taken into consideration for this purpose; schipperke, finish lapphund, Norwegian buhund and Norwegian elkhound, black. These breeds has been tested theoretical by a comparison of mentality and health.

This report is about changes in an organization. Changes is something that every organization sooner or later is bound to do. In many cases the changes leads to problems and conflicts. I have chosen to study one change process in the home help service of the municipality of Bollnäs. The change process I have chosen to study is about changes in the day-to-day work for the employees at the home help service.

The practice of landscape architectural involves forming the space in our cities and suburbs, as well as the landscape surrounding. The need of exploiting green environment leads up to, among other issues, flood problem during heavy rain and overfed water environments. The problem is partially caused by the shortage of knowledge, how the environment is responding of the innovations made by the city- urban planning and how to get sustainability. Research and knowledge how to take care of our environment, in a natural way, is increasing. The object of the thesis is to propose control and balance in urban wetlands, and discuss the difference a plant design can do. The thesis deals with discourses in the field of landscape architecture, biological diversity, dam construction, limnology, planting design and management, pollution of the environment and urban design practice.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

Ever since ABB has begun diecasting their rotors instead of permanent mold casting it,variation in the quality of the cast has arisen. Diecasting is performed in three differentmachines, M1, M2, M3 with 400, 660 respectively 800 tons of die locking pressures.The aim of this thesis is to answer the following questions:What is the ?right? cast quality? How is the right quality achieved?For sizes 160-180 solutions will be proposed that consider eccentricity between thelaminate and the short circuit ring as well as elimination of the thin Al film that appearson the outer periphery of the rotors.Through considering the statistic material the most often diverging rotor type has beenidentified and one of the actual rotors has been sent to a laboratory to be analyzed inorder to establish the current defects. The result of the analysis shows that there areplenty of gas- and oxide-porosity.It has been proved that every time the dies temperature decreased below 120°C thecontent of gas porosity increased. It is due to rapid solidification of metal that flowsthrough the ?cold? laminate.It has confirmed that enhanced porosity in squirrel cage causes high impedance in therotors.

Det ständigt ökande trycket på minskande utsläpp och effektivare energianvändning driver utvecklingen av Scanias produkter. För att varakonkurrenskraftiga på marknaden behöver man leverera lastbilar med högre kvalitet och lägre bränsleförbrukning, det vill säga sänka transportkostnaderna förkunden. Ett steg i detta är att utveckla komponenter i fordonet som är optimerade iförsta hand med avseende på hållfasthet men även mot vikt och pris. En betydande andel av lastbilens komponenter är plåtfästen som ofta underprioriteras i produktutvecklingen. Examensarbetet fokuserade därför på att utveckla metoder för konstruktion av plåtfästen.En metod för att förbättra konstruktionerna är att arbeta med simuleringsdriven konstruktion.

In a sequence described in the next paragraphs, I remove the poorly insulated roof of Gustavsberg Porcelain Factory and make new use of its  foundation. The monolith cement slab, once supporting heavy industrial machinery, is now the site of lakes and other movements:The top floor area is split, and a new built volume, one story higher, overtakes the southern half resting on the factory?s basement, digging into it at its western and eastern ends. Striking horizontally, the fissure exposes a long central axis, taking advantage of the factory?s horizontality to articulate vastness .

Material handling is a term that includes all kinds of handling of material from a raw product to a finished one. ABB is active in the following segments; foundry, packaging and palletizing, metal industry and plastics industry.The demands for efficiency and reliability have been set very high in the industrial sector. Optimizing of the material handling will give the company higher cost-effectiveness. Around the robot there are different kinds of material flows, to optimize the cycle time, consisting of carriages combined in different ways.Motion Control is a complex system with main functions such as; positioning, synchronizing, indexing and more. The products in the system need to cooperate to make these functions possible therefore integration of motor- and servo products are important.

During a major part of modernity the concept of identity was something that in many ways was predetermined for the individual. People in general remained in the same social spheres as the generations before, shared common religions and beliefs and where more or less bound to a geographic area. Identity and lifestyle was something that was adapted quite unreflected from habit and tradition. Though, during the cultural modernisation process that took place in the twentieth century, previous shared patterns of interpretation vanished and became individual.  Finding references, constructing an identity and establishing a self became individual.

Background For patients in need for psychiatric care who refuse treatment, coercive care might be necessary due to The Law of Psychiatric Compulsory Care, LPT. The purpose of this law is to make sure the patient later on will be able to increase autonomy. The most frequent patients in coercive care suffer from psychosis, heavy depression or having high risk of committing suicide. One of the most important tasks in the nurse profession is to increase patients? autonomy.

This essay is an analysis of the objects made of bronze found in an excavation Västergarn parish, Gotland, in 2010, conducted by the University of Gotland. The studied material presented in this essay comes from contexts inside, as well as nearby the foundation of a medieval building which purpose is still not certain. The first purpose of this study is to present the bronze-objects found inside and nearby the foundation of house 6, and to see if there are any datable objects. There is also a discussion whether there has been any bronze-crafting in the area. The second purpose is to make a contextual analysis to see if there are any differences between the material found outside and inside of the building, and what conclusions can be made regarding the function and use of the building.

This essay focus on work related stress and psychosocial enviroment in working life. The purpose of this study is to present a detailed description of regulation of the the Occupational Safety and Health Act and investigate how well employees are being protected by the law.I will also explain with the help of statistic which employees that most often suffer from work related stress and the results is discussed from a gender perspective.Work related phycosocial health is a big issue in todays workplaces, and people who suffers from stress are supposed to be protecteded by the the Occupational Safety and Health Act, but is that really the truth? The Occupational Safety and Health Act is a frame law, meaning the law is general and needs binding regulations to define the rules, and there is no such act about work related stress at the moment. No employer has ever been convicted for work related stress. At the same time the Occupational Safety and Health Act explains that the employer has a responsibility to take arrangement to prevent mental illness in working life.It?s mostly women who suffer from work related stress.