I have together with Frimeko AB developed new hallway furniture for preschools. The background to the project is the fact that all the existing hallway furniture?s on the market today have a similar design and same features. None of the furniture stands out immediately. Companies who work with school furniture in general have been inspired by each other, and therefore is the collections monotonous.

This thesis work includes studies and simulation how magnetization of the translator in a linear generator for wave power can be automated. The translator is the moving component in the generator that is "dressed" with permanent magnets. The translator is magnetized with rectangle-shaped permanent magnets that are today's strongest permanent magnet type of neodymium-iron-boron (NdFeB).Eight equivalent metal sheets are mounted around the translator. The plates have milled tracks where 106 permanent magnets per sheet are mounted. Today the assembling of the magnets is done by hand, which is a very tedious and time-consuming work.  This project presents investigations about the automation of the translator magnetization theoretically and simulation results are preformed in ABB's robot simulation software RobotStudio. Even robot-held tool was designed that enables the robot to be able to magnetize the translator in a simple manner.  The investment cost is roughly 1.5 million SEK. With an economic life-time of five years, the investment costs are estimated to 24000 SEK / month.  According to the calculations, this project is very motivated to implement, as it provides savings up to 17 000 SEK per translator which is 10.2 million SEK assuming that the robot cell is operating at full speed the whole year.According to this thesis work the result is a 4x9 meter cell with two industrial robots of the type ABB IRB6650S.The cycle time to magnetize one translator was calculated to about 10 hours.This prototype of project can possibly be implemented in a full-scale production line and performed according to the calculations and simulations presented in the report. Further work is suggested to improve the tool.Lyssna .

The purpose of this study was to investigate how social workers who worked with financial assistance perceived their work situation and the impact work-related stress had on their health and quality of work. Further, the study intended to find out if they felt that they received support from their employer that could prevent stress-related sick leave. The following two research questions were to be answered: In what way does work-related stress affect social workers? health and job quality according to their own experience? What kind of support and help experienced social workers were available within their organization? To receive answers to the questions semi-structured interviews with five social workers were conducted, analyzed and interpreted. The results showed that when social workers have a heavy case burden, high stress and a risk of deteriorated job quality occurred.

I dagsläget finns en stor mängd byggnader i Sverige där fasaden består av puts direkt anliggande mot antingen lättbetong eller tegel. Dessa fasader kan skapa problem för brukaren p.g.a. fukttransport via putsen direkt in i konstruktionen. Problemen som kan uppstå som följd av dessa konstruktioner är inte bara estetiska utan kan även påverka inomhusmiljön. Syftet med detta arbete var att undersöka om det gick att med ny teknik visa de resultat som framkommit från erfarenheter från praktiskt arbete samt undersöka hur en renovering påverkar de fasader som består av puts direkt mot lättbetong eller tegel.

The thesis was performed at the lighting company Zpecta AB. Zpecta needed to develop alternative attachment of their LED-luminaire Capella. Today Capella attaches in metal ceilings with four magnets. Zpecta got indications from their customers that there was a need for other attachments. The purpose is to determine the customer?s requirements and the interfaces that are considered for Capella.During the thesis, Capella was only on the market for testing and evaluation.The thesis was initiated to create a specification.

AbstractBackgroundWorking in primary care with chronic leg ulcers is both time-consuming and difficult. There is a large category of patients with leg ulcers, that is expected to increase in a number of years, and many of them will probably come to a district nurse for help.AimThe aim of this study was to describe the district nurses' experiences of caring for patients with chronic leg ulcers in primary care.MethodThe approach was qualitative. The study was done with a phenomenological life-world approach. Seven district nurses working in primary care were interviewed. The phenomenological perspective focuses on the respondents? own life-world and has openness to the interviewee's own experiences.

SUMMARYEnvironmental issues are currently a hot topic of debate. Studies within the optics branch have not specifically been conducted previously, so the aim of this study was to determine the extent of environmental-awareness specifically within this branch.A survey, consisting of questions relating to environmental issues, was distributed to 100 randomly-selected opticians in Sweden. Of these 100 surveys, 64 were returned and showed a varied branch-engagement for environmental issues.Results of this survey showed that opticians were best in sorting newspapers, magazines, other paper and hazardous waste. Metal and rigid plastic were not sorted to any larger extent.Choosing environmentally-safe products was not so popular and only six stores always do this. 25 shops turn off electrical machines and equipment over night; while the majority of the remaining stores leave the machines on during the night.27 stores did not know if their electrical company provided ?green electricity?.Results showed that there is a lot of work to be done in making the stores more environmentally friendly.

The aim of the study was to investigate whether the sedation method had an effect on the screening result for hip dysplasia (HD). Another aspect considered was if the dog?s weight had an impact on the results. This study was a follow up on the results from an earlier study of sedation routines in Swedish dogs. The breeds included in this study were the same as in the earlier one; German shepherd, Bernese mountain dog, Boxer, Newfoundland, Rottweiler, Saint Bernard, Golden and Labrador Retriever.

Scana-Booforge is a Swedish company which specialize in heat treatment of various metal. The treatments take place in quenching ovens, where fans are used to circulate the hot air. The fans used today do not have a satisfactory lifespan. This thesis aims to develop a new design of the fans for the quenching ovens, and the goal is that the new fans will bring cost savings for Scana-Booforge.The design development process started with mapping out the environment in which the fans operate, and with analysis of the existing fan structure and damages, in order to establish the cause of failure and of short durability. The performance of the fan were also established at this stage.

Unhealthiness is not just a damaged back or asbestos. The fact that mental ill-health seems to increase in our society is well known. Statistics from Arbetsmiljöverket proves a fourfold increase of work-related disorders since 1997. These are primarily caused by organizational and social factors, 60% are considered caused by stress and a heavy workload. Sick leave due work related fatigue and depressions are scarily common today.

The main purpose of the project was to identify potential environmentally harmful substances which can be leached from rubber asphalt. A method for analysing asphalt was developed and three rubber asphalt materials were analysed after being cryogrinded. One of the materials was also tested in a road machine made for testing of asphalt paving. The particles created in the machine were analysed in the same manner as the cryogrinded asphalt materials.The asphalt materials were leached by water during 24 hours. The leachates were extracted with dichloromethane, dried with sodium sulphate and concentrated to a small volume.

It's an everyday experience shared by many that nature can be of help in relieving pain, reducing stress, support mental recovery etc. In the last three decades or so this experience has also found support in a large number of scientific investigations. Among other things the experience of nature has been shown to reduce stress and pain in patients and to boost concentration and reduce impulsive behavior in children. Most of this research however has mainly been concerned with the visual modality. In this thesis the aim has been to focus on the auditory modality in this context by trying to reveal some effects on people from the exposure of nature sounds played indoors in three different environments: a grammar school class room, a kindergarten play room and a post-surgery wake up room at an intensive care unit.

Lake lowering in sulphide-rich areas is currently a major environmental impact for surface water. This study focuses on whether there is a relationship between a gradient of lake lowering and surface water impacts in areas of sulphide-rich sediments, in order to better understand their contribution of Heavy metals and sulfuric acid. Also, is it a reasonable method to use the reduced lake area in order to quantify the gradient? The survey was conducted by collecting water samples from reference lakes and lowered lakes from south to north in coastal areas within the county of Västerbotten. Water samples were then analyzed for TOC, pH, conductivity, anions, base cations, alkalinity, acidity, sulfate, Al, Cd, Fe, Mn, Cu, Zn and Pb.

The door and its surrounding, is an important part of all buildings. It often amount to a significant part of buildings total costs. The more demands of functions the largerdoes the costs grow.The purpose of this report is to analyze those demands and how to fulfill them.Another purpose is to examine of which reasons the cost grow and how to avoid it inthe best possible way. The study will be performed in collaboration with Bjerking AB. To define the demands a literature study will also be performed.

SammanfattningSyftet med examensarbetet är att utveckla en ny algoritm för att bedöma förarens framförhållningsförmåga. I arbetet ingick att undersöka vilka produkter som finns på marknaden idag, hur en förare kan påverka bränsleförbrukningen samt vilka principerna för Heavy EcoDriving är och hur de kan användas i de IT-lösningar som examensarbetets uppdragsgivare Fleetech utvecklar och säljer.Av två möjliga inriktningar, backkörning och accelerations- och bromsanalys, valdes det senare för utveckling av algoritmen. Tre olika koncept togs därefter fram:? Koncept 1: Utrullningskvot Där tiden som föraren använder motorbromsen(utrullning) loggas och ställs i relation till den tid som bromsen används.? Koncept 2: Accelerations- och bromskvot Där den hastighet som bromsas bort ställs i relation till den hastighet som har accelererats upp för att ge ett mått på bortbromsad energi.? Koncept 3: Framförhållning Detta koncept är tredelat. Antalet korta stop, tiden mellan broms och nästa acceleration samt hur mycket utrullning en enskild inbromsning innehåller.Koncepten modellerades och simulerades varefter de omsattes till kod.