This work consists of a survey and risk classification of eleven metal industries including foundries, finishers and engineering industries in two industrial areas in Mora. The study follows a method called MIFO (Method of Surveying Contaminated Sites) composed by the Swedish Environmental Protection Agency. In the method assessments of the degree of hazard posed by the pollutants, the level of pollution, the conditions of dispersal, sensitivity and the degree to which the area is worthy to protect are made for each contaminated site (object). The assessment classify the objects into four risk classes in which risk class 1 denotes a very large risk, 2 large risk, 3 moderate risk and risk class 4 little risk. The work of surveying using MIFO is divided into two phases.

Most of the city of Uppsala rests on postglacial clay with a varying content of sulphur. The sulphur occurs naturally in the clay in reduced form as sulphide and the clay is for that reason usually called ?sulphide clay?. Excavation during construction activities gives rise to large amounts of excavation material, of which the sulphide clay is a considerable part.When the clay is exposed to air and water, an oxidation of the sulphides occurs which may produce an acid leachate and the mobilisation of heavy metals bound in the clay or underlying material. The aim of the work has been to improve our understanding of the behaviour of sulphide clays and produce a basis for risk assessment in the future handling of excavation material with high sulphide content.

AbstractThe research project Liberation, supported by the European Commission under the Environment and Sustainable Development Programme (Fifth RTD Framework Programme) aimed at developing a decision support system for ecological risk assessment of contaminated sites has proposed a tiered system including the triad method. This method integrates contaminant chemistry and bioavailability analyses with observed ecotoxicological effects in soil and groundwater. In this study the triad method was used to perform a risk characterization of a former surface treatment and metal industry, now used for the student union buildings of the Mälardalen University in Eskilstuna, Sweden. On the site, high concentrations of copper, zinc and nickel have been detected in the soil in a preliminary investigation of contaminant levels with XRF. For performing the risk assessment of the site according to the triad method, contaminant bioavailability, soil metal concentrations and soil toxicity were determined and an ecological assessment was carried out on four selected soil samples (one reference soil and three samples with low (B), medium (C) and high (D) contaminant levels). Contaminant bioavailability was measured through leaching (ISO TC 190/S7) and biouptake tests (DGT).

In cooperation with the Gislaved company Lerocon AB [1], a separation module wasdesigned as a further supplement to the Module System. The aim of theprojectimplementation was that the separation module could be flexible enough to feed themetal pieces, screws, nuts and other items with large variations of size, appearance andmaterial composition. The module should also be cost effective to manufacture.A separation module is a design which is ment to streamline the work in industries withautomation of the lineoperations. The module feeds the details such as screws, nuts, washersand pieces of metal in a continuous flow in which traps separate the details from each other.Traps may vary depending on the purpose and of the details that are fed. Perhaps it isimportant for the user that the detail-orientation is right after the separation module, whichmeans that all the pieces witch aren´t are fed back in return.For companies and industries in lineoperations that can be made more efficient withautomation, are production flow an important watchword.

The aim of this study was to investigate how seasonal variations affect the quality of logging residues. The study was hosted by VIDA Energy. Logging residues can be processed and transported within different systems. Today the dominant systems are chipping at landing and bulk transportation of logging residues. In these systems the handling of the logging residues are carried out in the same manner up to the landings. Moisture content at the time of chipping is the primary quality parameter. Fine fractions of logging residues are strongly dependent on moisture content in storage.

Background: The district nurses profession has traditionally been health promotion. In order to find patients with excessive alcohol intake, district nurses use AUDIT. Research shows that health professionals find it difficult to face alcohol abusers in primary care. AIM: The aim is to describe how district nurses work with AUDIT. Method: Semi-structured interviews with six informants were carried out.

Welding is a common method for joining of metal or plastic construction parts. This report describes several different weld methods in general terms. The report focuses on the GMAW method, specifically MAG welding.A case study has also been performed for the company Wenmec. The task received from the company was to compare the mechanical properties of joints welded with the tube electrode called Nittetsu SM-3A and joints welded with the homogenous electrode called ESAB Aristorod 12.63. Both types of weld joint were welded with the MAG method with an Argon based shielding gas with 18% CO2.

It is important that the current urine separating systems are evaluated to allow improvements to be made and consequently increase their future propagation. In order to increase the knowledge about urine separating systems this study was made. It included, among other things, measurements of amounts of urine as well as of the composition of urine collected at Nytorgsgatan 4 in the city of Hallsberg. The study was increased after an inquiry that also included the district of Understenshöjden in the city of Stockholm. In the inquiry, the users were asked questions about odour, cleaning of toilets and occurrence of blockages in the urine water locks etc.

Denna examensrapport redogör för hur man kan få en kortslutningsskyddadoch säker inkoppling av en DC-länk mellan två skiljda elektriska system.Rapporten bygger på hur en lastbil ska kunna få en större säkerhet för attbibehålla sina elektriska bromsar om tex ett av bromssystemen tappar sinordinarie matning.Lastbilens bromssystem består idag av två skiljda elektriska system med ett 24volts strömförsörjande batteri vardera. Det ingår två stycken elektriskabromsar i varje system. Om det tex blir fel på en av bromsarna och dennapåverkar ett av systemen vill man kunna koppla bort denna enskilda bromsmed sitt system. Man vill även kunna försörja den fungerande bromsen somsitter i samma system via en så kallad Axle Link. Denna strömmatningslänksitter mellan två hjulpar på samma axel.I denna studie undersöktes möjligheten att realisera en kortslutningsskyddadoch säker DC-överföring via en Axle Link, i första hand med diskretakomponenter.

The thesis was done in collaboration with EAB situated in Smålandsstenar. In the initial discussion faze on doing a thesis with them there was a need to analyze and ensure the strength of an existing product, cantilever racks. This included performing FEM calculations on a model and comparing the results with physical tests.EAB has two models of cantilever racks, a light duty and a heavy duty. Within the heavy duty model series there are five product variants that differ in both size and load capacity. We will be working with the product variant with a load capacity of 1000 kg/arm which is the variant that is in the middle of the series.When we started work on the thesis we did a literature study and couldn?t find any well defined methodology that integrates both product development and computer aided design analysis.

Utsläpp av lättflyktiga organiska föreningar (VOC) är ett växande mijlöproblem. Biofiltrering är ett relativt billigt sätt att rena luft förorenad med VOC. Biofiltrering har också en fördel i att föroreningen helt bryts ned och inte endast övergår i en annan form. Rapporten beskriver arbetet kring två biofilter av kolonntyp. Mikroberna som användes kom från främst träflis och jord.

The Arctic region appears as a pristine remote environment, yet there is increasing evidence that it is greatly impacted by pollution such as lead (Pb) and mercury (Hg). In this environment deposition of Hg has increased threefold since the last industrial revolution. In this study five cryosolic soil profiles within non-sorted circles (NSC) in the Abisko region, northwest of Sweden, has been analyzed to improve our understanding regarding how pollutants are distributed within such type of soil. The soil samples have been analyzed with the use of X-ray fluorescence analysis (XRF), for the measurements of the total concentrations of e.g. lead (Pb) and zirconium (Zr).

Our employer Camatec Industriteknik AB gave us the assignments to increase theirs range of versions on Camcoil that is their own patent product. Camcoil is a capstan system that is used when steel band fabricated. Exist for example in production lines their steel band should be annealed. Our goal with this work is to come up with a completed production basis on a Camcoil for heavy industry. The basis should contain calculations, 3D-constructions, drawings and cost proposal on manufacturing and detail purchase.Demands on this project:1.

The views on and the knowledge of the introduction of iron to Scandinavia have change by the history of archaeology. The results and discussions are put in the context of time and how that time is reflected in their work and texts. This limits that scholars put up to orientate themselves conceal the complex reality. The limits are changing all the time and is dependent of time and person..

This thesis is about making a support for barcode readers and RFID readers on a computermounted in heavy vehicles. The computer has several applications designed for heavyvehicles such as an order handling application. The goal was to suggest an architecture toimplement a support for the readers. The architecture should be independent of whichmanufacturer who has made the reader hardware that was connected to the computer.At first a theoretically study was made around RFID technology and standards for thetransport and supply sector. Then the architecture was developed and a demo implementationwas made.The conclusion of this thesis is to implement support for barcode readers with a wedgeapplication.