This is a degree project performed at Halmstad University in Sweden on the subject carpet ofreinforcement. This project is developed in association with Celsa Steel Service in Halmstad.The purpose of this report is to investigate how much time that can be saved if carpet ofreinforcement is used instead of the traditional way to work with reinforcement and seewhat kind of parameters that is important between the choices. We are also going to seehow this product affects the situation for reinforcement workers from an ergonomic point ofview.Carpet of reinforcement is made by straight reinforcement?s bars that are welded togetherwith steel bands. These rolls are made at a factory with a machine that welds together thebars in determined centre distance, with desired dimensions after the constructionengineers? blueprints.

The industrialization in Sweden has increased the large number of areas that have been contaminated with various types of pollution. One of those sites are the property Höjen 3:24 in Arboga where ?Arboga Mekaniska Verkstad? once been. The property wants to increase the use of the old former foundry building with the adjacent ?plate-workshop? and believe there are two options for the building: That the building either should be used as a warehouse/concert hall, or rebuilt into a cultural center. An environmental evaluation has shown that the levels of heavy metals are over the Swedish environmental protection agency guidelines of less sensitive land.

Forestry is increasing on an industrial scale where collection of logging residues takes a greater part. This has resulted in more machinery and heavy machinery driving in the clear felled area, this increases the risk of soil damage that will occur in the form of soil compacting and rutting in the clearings. This affecting on the nature in a negative way and especially in rivers and lakes that are affected by siltation and acidification leading to increased levels of heavy metals and methyl mercury. The purpose of this study was to investigate why there is damage to the ground when working with the slash in forest management from the forest officer point of view. A self-designed questionnaire was used and 45 questionnaires were sent out to various companies all over Sweden.

Rock singing - five vocal teachers´ experience of the female voice.The purpose of this study is to find out what different vocal teachers have to say about rock singing and the female singing voice. The method I have used to gather information is a phenomenographically inspired qualitative interview. The study begins with a few thoughts about my interest in rock singing, followed by a short overview about other research and literature that has been published on the subject. I have interviewed five vocal teachers in this study. All of them with many years experience of singing, both singing themselves and teaching professionally.

With the prospect of future construction on the Skutskär Pulp Mill property, Stora Enso Fine Paper has initiated an investigation of soil contaminants and a risk assessment of these contaminants. A soil and groundwater investigation has therefore been conducted on an open area of about 16 000 square meters, situated between the current wood room and digester house. To be able to integrate this study into an investigation for the whole industrial property, the study has been carried out as a phase 2 study according to the Swedish Environmental Protection Agency?s Methods of Inventories of Contaminated sites (MIFO).The site investigation has involved soil and groundwater sampling, together with the analysis of heavy metals and organic contaminants. The degree of hazard posed by the contaminants, the level of contamination, the potential for migration of the contaminants, as well as the degree to which protection of human health and the environment is required in the area, have been weighed together for an overall risk assessment of the area with regard to human health and the environment.The investigated area was built up by filling in the coastal waters.

Sewage sludge contains plant nutrients and has earlier been utilised as fertilizer to cropland. Unfortunately not only plant nutrients but also heavy metals, pathogens and organic contaminants tend to accumulate in sludge. The suitability to use sewage sludge in agriculture has therefore been subject to several discussions over the years. The Swedish food industry does no longer accept sludge as fertiliser for Swedish producers. In 1999 the Swedish parliament accepted several objectives for environmental protection. In order to prevent environmental pollution and further exploitation of the earth crust, one of these objectives confirm that phosphorous from sewage shall be recirculated to arable land.

Lotsbroverket is the largest wastewater treatment plant on the Aland Islands and it isdesigned for handling wastewater from approximately 30 000 persons. In 2011,Lotsbroverket produced about 2800 m3 of dewatered sludge. The sewage sludge that isproduced is transported to a contractor where it is processed to eventually be used e.g.in the construction of green space. This study aims to investigate available applicationoptions in terms of the sewage sludge that is produced in Lotsbroverket. The main aimis to study the feasibility of using the produced sewage sludge as a fertilizer in theagriculture of the Aland Islands.The sludge already fulfills limit values for heavy metals in accordance with the Act"The Aland Government´s directive on the use of sewage sludge in agriculture." Inorder to clarify the sludge content of pharmaceutical and organic substances it isrequired that the substances are identified and a risk assessment is performed.

Emissions of insufficiently treated wastewater, mainly blackwater (i.e. wastewater from toilets), contributes to the eutrophication of lakes and seas. At the same time, blackwater is a fraction with a low content of heavy metals and, after sanitization, it can recirculate plant nutrients to arable land using the liquid composting treatment method. Liquid composting means that organic material is degraded under aerobic conditions. For sanitization, the blackwater needs to be treated together with energy-rich complementary material.

X-ray fluorescence (XRF) detection of heavy metals is a cost- and time-effective method for investigation of polluted areas. Compared to laboratory analysis, XRF analysis is limited by high detection limits and uncertainties in some situations. Preparation of samples is known to affect the results of measurements.The purpose of this thesis is to bring a deeper understanding of how different factors affect the results of XRF-analysis. A large number of measurements have been made with the instruments Niton XLt 700 and Niton Xli 700. Results from measurements of lead, zinc and copper have been analysed.This study has shown that a greater moisture content will give a lower measured concentration for the same sample.

The purpose with this thesis work was to design and build a technical aid for installingbatteries in telecom base stations. Today that job is done manually, since there is noequipment on the market for that purpose. Installing batteries in base stations manually isa very tough job.To get ideas for possible solutions a preliminary study on existing lift aids was done.From the preliminary study the conclusion that some kind of overhead crane would besuitable for the task was drawn. After that a lift for installing batteries in base stationswas designed, built and tested. The tests show that it is possible to minimize heavy liftingwhen installing batteries in telecom base stations, at a relatively low cost.ii.

3nine has developed oil mist separators for the manufacturing industry. They are used in factories and workshops in Sweden as well as many other countries. The basis for this thesis is to investigate the performance of these separators in applied environments under different circumstances and to find factors that influence the performance. It has been shown both theoretically and in laboratory environments that the sizes of the particles in the oil mist influences the performance of separation. This is to be verified under applied circumstances as well.The separators also have in most cases, after the centrifugal separation, HEPA-filters mounted that separates the remaining oil mist.

This report describes how a syringe pumpwas developed for Q-linea AB inUppsala Science Park as a bachelor´sthesis at Uppsala University. Thepurpose of the syringe pump is toreplace existing pumps in one of Qlineasdosage instruments. The reasons for whythe pumps are replaced are that they arebig and heavy. Therefore the task was todesign a smaller and lighter syringepump.The goal of the project was to create aprototype of the design that met themechanical requirements posed. Therequirements were met.In the report the work process can befollowed from the development of thespecifications to the final design andtests of the prototype.

The farm management system controlled traffic farming (CTF) aims to reduce soil compaction by restricting the field traffic from agricultural machinery to permanent traffic lanes. Literature and empirical findings show that soil compaction and field traffic from heavy machinery may affect crop growth negatively, reducing crop yields. If grass-clover leys are subject to heavy field traffic the botanic composition might be altered, providing a lower clover content in the forage. Clover as a silage feed is rich in protein providing good conditions for high yielding dairy cows. Grass-clover silage production is generally associated with intensive field traffic.

In this report female farmers use of technical equipment is investigated. There is little research made on this subject in Sweden, therefore this report can be seen as an explorative study. Research makes it clear that machinery, throughout history and even today, has been seen as a male area. Heavy machines are often associated with the same attributes as masculinity. Force, power, efficiency and control are some examples.

In this report female farmers use of technical equipment is investigated. There is little research made on this subject in Sweden, therefore this report can be seen as an explorative study. Research makes it clear that machinery, throughout history and even today, has been seen as a male area. Heavy machines are often associated with the same attributes as masculinity. Force, power, efficiency and control are some examples.