This report is of technical character and treats how to plan a small building in Borlänge, Sweden.The technical components that have been treated in the report are the construction, foundation,installations and thermic abilities of the house. In addition to planning this house the report alsocontains a part that deepens in net zero energy buildings. The purpose of the report is toinvestigate if the house in Borlänge can be constructed to meet net zero energy buildingdemands.Energy efficient houses such as passive- and net zero energy houses are showing more frequenton the market in Sweden. Ongoing climate changes and growing consciousness about theenvironment in society have contributed to that the environment is a well discussed topic. Toconsume small amounts of energy and at the same time produce local energy is thereforesomething that lies in the future and future houses.

Abstract   This degree project comprises 30 credits, i.e. 20 weeks of work. The work mainly deals with the energy balance for a multi-family house in Västerås and the requirements for energy conservation in the Swedish building code, BBR. Calculations of the energy balance are supplemented by a number of interviews. Energy conservation in general has become more important in recent years and the subject is in line with increased public awareness. This importance and attention is explained by environmental problems in general and global warming in particular, but also by rising energy prices.

Syftet med detta examensarbete har varit att genomföra en nulägesanalys av Hall 7 på Sapa Heat Transfer AB i Finspång. Utifrån nulägesanalysen togs åtgärdsförslag fram som kan generera en effektivare uppvärmning, mindre yttre utsläpp och behagligare arbetsklimat. Problemet i Hall 7 är att processventilationen för varmvalsverk 2051 är ålderstigen och underdimensionerad, den saknar även värmeåtervinning och rening av processfrånluften. Detta leder till oplanerade driftstopp, höga underhållskostnader samt hög energianvändning.För att finna åtgärdsförslag för dessa problem genomfördes en nulägesanalys av Hall 7 genom att mäta luftflöden och temperaturer, analysera utsläppsmätningar och energianvändning samt intervjua personal.Utifrån dessa mätningar har fyra olika åtgärdsförslag tagits fram. De fyra åtgärdsförslagen är benämns: YIT, YIT (Enklare), Homehall och Ökad tilluft.Det åtgärdsförslag som anses vara bäst lämpat för att generera en effektivare uppvärmning, ge mindre yttre utsläpp samt ett behagligare arbetsklimat i Hall 7 är åtgärdsförslag Homehall.

This study was done regarding whether sealing or ventilation is the best solution to prevent moisture on cold attics. The authors of this report addressed the problem with moisture in attics when they started their cooperation with Peab.The methods included interviews with people, database research, and calculations of a project in Akersberga north of Stockholm. The conclusion is based on interviews and other information as they are analyzed in relation to the house of reference. The focus of this report is on problems with moisture in the attics known as cold attics.The background of the problem with moisture is that today?s slabs are usually insulated to save energy and that the attics nearly gives the climate as the outdoor climate.

The purpose of the house which is the basis of this report is to be able present itself on the market as a relatively cheap and at the same time a climate friendly choice. The house is supposed to be able to be built anywhere in Sweden and the rest of Scandinavia in a short period of time. This puts demand on what kind of heating system the house can have, since not all places have the geographic advantage of being able to use geothermal or district heating. Therefore the heating system choices will only include those that are not limited by their geographic location. The house will be built in modules which only require the groundwork to be done before the house can be erected. In this report "System solutions for plus or passive-housing" a comprehensive literature search has been conducted as well as a number of calculations.

Kolorektal cancer (CRC) är en av de vanligaste cancersjukdomarna i världen med cirka 1 miljon nya detekterade fall per år. Special AT-rich sequence-binding protein1 (SATB1) är ett celltyp-specifikt kärnmatrix-associerat DNA-bindande protein, vilket utgörs av AT-rika DNA sekvenser. Det har tidigare demonstrerats att en annan medlem i SATB-familjen, SATB2, uttrycks på ett vävnadsspecifikt sätt i normal mukosa i nedre mag-tarmkanalen och i CRC. ?-catenin är en intracellulär mediator i Wnt/?-catenin signaleringsvägen, som spelar en viktig roll i kolorektal carcinogenes.

As the volumes are entering the world of computer graphics the pure volume visualisation becomes a more important tool in for example research and medical applications. But the advance in haptics --- force feedback from the computer --- is behind. In volume haptics no equal to the proxy method so popular in surface haptics has yet emerged. Some implementations of volume haptics even use surfaces as intermediate representations so that surface haptics can be used.The intention of this work was to create natural feeling haptic feedback from volumetric density data using pure volume haptics. The haptic algorithm would be implemented in Reachin API for the Reachin Desktop Display, together with other parts to build up a usable volume visualisation environment.To achieve the feeling of stiffness and friction dependent on tissue type, a proxy based method was developed.

Abstract Background: In 1997 the Kyoto Protocol was signed, it?s an international agreement which is aimed to reduce greenhouse gas emissions. Sweden's goal is to reduce energy using in buildings with 20 percent by 2020 and 50 percent by 2050. This is a comparison with levels from 1995 (Glad, 2006). For Sweden to be able to reach its goals, they need to construct more low-energy buildings (Åhman, Wahlström & Lundblad, 2010).

Each year, the coffee machines at Ericsson in Kista produce around 100 tons of ground coffee waste.The companies Coor Service Management, Löfbergs Lila and Selecta are all responsible for differentstages in the logistical chain in delivering coffee and, together with Ericsson, they want to increasetheir environmental benefit. The plan is to produce biogas through anaerobic digestion instead ofincinerating the coffee waste in a heating plant. The results are to be presented as different businesscases in which different biogas plants are compared with the reference case (heating plant),comparing costs and environmental impacts.There are two major environmental benefits from producing biogas; reduced carbon dioxideemissions from when fossile fule is replaced by carbon neutral biogas, and reduced emissions fromreturning digestate from the bio reactor to farmland instead of using industrial fertelizer.In order to determine the biogas potential in coffee waste, a couple of properties had to bedetermined in a laboratory. Properties such as the dry substance content, heating value, moisturecontent and ash content. The results show that 100 tons coffee waste could produce around 16 500Nm3 biogas which would contain 163 MWh.The biogas reactor and upgrade plant both need energy gas to function and uses around 14 MWh ofthe produced gas.

To fulfill the climate target that EU and the Swedish government have decided to apply, it becomes increasingly important that the energy efficiency of existing buildings and making new buildings energy efficient as possible. Of Sweden?s total energy consumption in 2011 was 40% used by residential and service. Of the 40% of the energy consumption was 60% used for heating and domestic hot water. A report from year 2012 shows that one reason why the heating volume is so great could be due to underestimating on the energy consumption for the heating in the planning of the building.

During the past 30 years the fuels for energy production in heating and power plants have changed. Fossil fuels have decreased in usage whereas bio fuels in Sweden have increased with 60% since the 1970's. Different fuels affects combustion and the release of various substances and particles into the flue gas. This is caused by the diverse components and chemical structures of fossil fuels and bio fuels. When the flue gas leave the combustion chamber and enters the path to the chimney particles in the gas are being transported out of the combustion chamber.

A patient simulator for testing anaesthesia machines has been developed at Maquet Critical Care AB, to reduce costly and time-consuming experiments on animals. The device simulates human lungs regarding lung dynamics and volume, uptake of anaesthetic agents and the production of carbon dioxide, heat and moisture. Further demands on the simulator are durability and size; the device shall be compact enough to be moveable.The resulting simulator fulfils the requirements and enables better repeatability and ability to test extreme cases than experiments on animals do.Uptake of the anaesthetic agent is achieved in a active carbon filter and controlled by regulating the flow. The flow is created by a regenerative blower and controlled using a proportional valve. The uptake can be set by the user or by a simple uptake model modified to recursively handle changes in the concentration of anaesthetic agent.Carbon dioxide is fed into the system from a tank by a mass flow regulator.

The housing sector uses 40 % of the energy in Sweden and half of the electricity usage. Theuse of energy is the main reason to the increasing rate of carbon dioxide in the atmosphere.This is the main motive but also a wish of higher safety, that is a higher rate of selfsufficientenergy production in Sweden, we want to decrease the need of using fossil fuel. Now whenthe energy price rise, the interest in energy issues increase and more people discuss thepossibility of reducing the usage of fossil fuel. A change to renewable energy such as sun,wind and water is the only solution where we can get a sustainable development.One way to contribute to a better use of energy is to build in the principle of passive house.The house is being built with a thick and tight insulation. If you use a heat-exchanger withhigh degree of efficiency and a final heating battery on the ventilation system, the heat fromlamps, devices and the ones living in the house should be enough to fulfil the criteria ofliving.

Obese horses with insulin resistance are often also afflicted with laminitis. Horses with these symptoms are given the diagnosis equine metabolic syndrome (EMS). Signs of insulin resistance are excessive accumulation of adipose tissue on the neck, around the withers and on the dorsal area of the hindquarters. Insulin resistance means that the function of insulin is defective and does not stimulate glucose uptake by the cells in the body in the correct way. This will result in an increased insulin release.

Laminitis is a debilitating disease causing much suffering to horses and ponies all over the world. It is manifested in the hooves as a mechanical failure of the suspensory apparatus between the hoof capsule and the distal phalanx. Due to the weight of the horse the disease may result in a dislocation of third phalanx. Six healthy standardbred trotters were used in this study on whether standardbreds tolerate forced recumbency as well as Shetland ponies. Recumbency was induced pharmacologically but maintained only by lowering the ceiling height of the box to a height of approximately 125 ? 140 % of the horse´s thoracic height.