SAPA´s resource of waste heat is the basis for this thesis to investigate the possibility of energy assets in their cooling water and possible uses for it. The energy in the waste water is greater than the current need which has three uses which are (1) heating the factory, (2) converting liquid propane to propane gas and (3) local domestic heating. The average energy load that is available is 1, 7 MW and the average temperature in the cooling water is 41°C. The total energy load at dimensioning out side temperature is approximately 1,6 MW for the three current uses. The temperature is currently too low to be used directly in the existing systems so an upgrade is needed.

My questions at issue for this report has it´s beginning in the growing problems of thenegative effects of burning fossile fuels and the rapidly growing energyprices.1. Is it possible to design a micro scale powerplant?2. Is it economically interesting for a potential customer to by such a product?The aim with this report is therefor, with the help of design work and calculations, to answerthese questions and to create a platform for building a fully functional micro scale powerplant.The material used in the report is mostly product catalogs from various industries but alsostudy course littrature about steam engines.The result of the report is that it is fully possible to design a fully functional micro scalepower plant.

In order to reach the environmental targets, set up by the EU, there are many measures taken to make Sweden more energy efficient. In the housing and real estate sector, an installation of an exhaust air heat pump that reuses the heat in the exhaust air in order to lower the amount of acquired energy, is an example of such an action. The recovered energy can then be used for heating of radiators and tap water. This report aims to evaluate and compare three different systems using exhaust air heat pumps regarding COP, degree of coverage and cost savings. This study was delimited to only account for apartment buildings.The theory chapter describes the different conditions and factors that affect a building?s energy balance.

Along with rising energy prices and increasing awareness of environmental issues, the criteria for buildings energy performance have been sharpened through the years. Today, ?passive house? and ?low energy house? are commonly used phrases in the construction industry and is expected to become increasingly common in the future.For houses with well-insulated building envelope the importance of well constructed details increases when minimizing the heat losses. Examples of these details are floor-wall junction and window openings in the wall. In such connections thermal bridges occur, which means that heat more easily is transported out of the building, compared to the rest of the building envelope.This report deals with detail solutions around windows and a comparison between a traditional slab and a foundation from Koljern consisting of foam glass.

AbstractBackgroundThe Swedish district heat market of today is a subject being discussed regarding the reasonableness of the heat district supplier?s price settings. The issue is currently on a government level where a new investigation is being executed at the time of writing. Many real estate owners are growing tired of the situation where the heat district suppliers are taking advantage of their monopoly position, thus feeling that the price of district heating has been increasing far too much for many years. The market can be described as a natural monopoly because the real estate owner has no possibility to choose another supplier if they are unsatisfied with the present.

Sweden has long had access to low electricity prices due to the wide availability of hydro and nuclear power. This has now changed because of today's rising electricity rates resulting in increasing heating costs for properties, especially in the properties with electric heating systems."Ankaret" is a parish for "Svenska Alliansmissionen", which is located at "Gullbrannagården".The parish has installed electrical radiators and an exhaust ventilation system that makes the energy demand high due to the large ventilation flows. The building was built as the price of electricity was still low and would reduce energy use today by combining its heating system with an air/air heat pump. The heat pump delivers more heat into the room than the electrical energy that it uses. This lowers the electricity needs.

Purpose: The purpose is to present a greater understanding of the progression of innovation capital in a technology transfer and biotech start-up context. The findings offer technology transfer professionals, entrepreneurs and academia an overall perception and mental framework of the technology transfer practice and the embracement of a promising invention, building upon its hidden value. Methodology: The thesis was conducted using a qualitative case study, executed with the help of interviews, in order to answer the research question: How is an embryo of innovation capital continuously cultivated in a technology transfer and biomedical start-up process? Conclusions: A technology transfer entity provides the means to establish a platform where an entrepreneur can build its own human capital, structural capital, and relationship capital. The forms of capital interact and thus create value, herein considered as innovation capital.

En hanteringsutrustning för att underlätta förberedelser av gips på sjukhus.

Drain water heat recovery is an uncommon measure in multi-unit residential buildings. There istechnology available for the purpose but the knowing and experience of the heat recovery systems islittle. The purpose of this thesis is to evaluate the future potential of drain water heat recovery inmulti-unit residential buildings.A major part of the multi-unit residential buildings in Sweden were built during modernismen andrekordåren (1940?1975). Many of the buildings have worn out drain and water supply systems andmany are in need of a general refurbishment.

The thesis describes a completely new biofuel system to generate particle-free heat from combustion of ash-containing biofuel particles at high temperatures.The suggested system gives opportunities to introduce biofuels in new areas.Main components in the suggested system is a heat radiating combustion chamber intended for pulverized wood, combined with regenerators to extract heat from flue gases and simultaneously preheating the combustion air.The thesis contains a description of the suggested system, theoretical considerations, calculations regarding the combustion, and includes results from tests performed.The results from calculations and tests performed concludes that the system is workable and possible to apply..

The arm?s length principle has existed in Swedish law since 1928 but has previously been given little attention. In 2007, documentation requirements were introduced, and the government began to do tax audits regarding transfer pricing. This thesis examines how the documentation requirements and tax audits affect the application of the arm's length principle. The research consists of nine interviews with a total of ten people at the tax authority (Skatteverket) and audit- and consulting agencies. The results of the interviews are analyzed using the agency theory. Many companies are risk averse and prefer having correct transfer pricing instead of taking on challenging strategies that can be risky in case of an investigation by Skatteverket.

The purpose of this thesis is to investigate if a transfer restriction in a conveyance of real property for consideration is legally binding. In doctrine the legal situation is described as unclear. It will also be investigated if the restriction is binding in relation to the acquirer´s creditors and in relation to a new owner of the property.A transfer restriction in a conveyance of real property for consideration is legally binding between the parties and in relation to a new owner of the property. Even though the restriction is binding between the parties and in relation to a new owner, it is not binding in relation to the acquirer´s creditors. The Supreme Court has stated that it is a general legal principle that a transfer restriction in a conveyance for consideration is not binding in relation to the acquirer´s creditors.In this thesis it will also be argued that the legal situation is inconsequent.

In today?s fast growing and closely connected society, a reliable and energy efficient transportation system is more than ever desirable. Nowadays the significant part of the transportation sector?s energy demand is supplied by fossil fuels.Improving energy efficiency in combustion engines will result in reduction of fuel consumption and CO2 emissions. A modern internal combustion engine has an efficiency of 30-45 %, where the most energy loss occurs as result of heat losses in the exhaust and cooling systems.

The capability to know what knowledge there is and where it resides within an organization is becoming increasingly important in the new knowledge-based economy. This paper takes on a practise-based view of knowledge in order to decide on a course of action for how to successfully implement knowledge management within a knowledge-based company. By considering all knowledge as more or less contextual and socially constructed, knowledge is divided into three dimensions depending on the degree to which it is tacit, namely: information, knowledge and skills. The paper then discusses inhibitors and enablers for transferring knowledge via these three dimensions respectively. The empirical findings are based upon a case study of Faveo. It is shown that Faveo, like most organizations, has til now focused on the collection of codified knowledge, i.e.

Companies learn through their employees. In this paper I make research into how knowledge transfer and learning occur at Metso Paper Karlstad AB, which is a partly project based organization.The result is that there are many factors that affect the knowledge transfer in a company. Knowledge transfer occurs mainly between individuals within the company, but also between departments and other actors outside the company. In the gaps between these actors, there is a risk that knowledge is not transferred, which is an obstacle to learning. A great deal of the knowledge transfer and the learning is carried out through individual?s own drive and motivation.