The purpose of this examination work was to make a general description about drying and storage of grain, and a case study with a comparison between brought and home-made feed. The case study was made on the farm Solhem in Hörby, a farm that produces 3870 pigs for slaughter a year. In this project three alternatives have been compared, 1st alternative: own produced grain approx. 400 ton + wet grain 415 ton purchased during fall, 2nd alternative: own produced grain approx. 400 ton + dry grain 415 ton purchased during winter, 3rd alternative: bought feed 815 ton purchased continuously during the year. Considering the price information provided to me the 1st alternative gave the cheapest feed..

The defence unit´s archive stretches over a time limit between the middle of 1971 to the end of 1987. The records the archive mainly contains are concerning the civil defence, inspection and construction of shelters, war- and crisis planning. The majority of the records are registered record, as often is the case with an authority?s archives. The main problems that occurred concerned what should or shouldn´t be public, the principle of provenance and what to prioritize; finish the project before deadline or make sure the records are prepared for a storage that ideally should last for several lifetimes..

Abstract Background: In 1997 the Kyoto Protocol was signed, it?s an international agreement which is aimed to reduce greenhouse gas emissions. Sweden's goal is to reduce energy using in buildings with 20 percent by 2020 and 50 percent by 2050. This is a comparison with levels from 1995 (Glad, 2006). For Sweden to be able to reach its goals, they need to construct more low-energy buildings (Åhman, Wahlström & Lundblad, 2010).

This master thesis is a study of the Swedish hydropower capacity to balance wind power. The Swedish government has decided that it should be possible to produce 30 TWh from wind power in the year 2020. The Swedish municipalities have to have plans for wind power plants with total yearly generation of 30 TWh. Wind power is an variable energy source that needs to be balanced by other energy sources. In Sweden the Swedish hydropower can be used for balancing a large scale introduction of wind power.

Each year, the coffee machines at Ericsson in Kista produce around 100 tons of ground coffee waste.The companies Coor Service Management, Löfbergs Lila and Selecta are all responsible for differentstages in the logistical chain in delivering coffee and, together with Ericsson, they want to increasetheir environmental benefit. The plan is to produce biogas through anaerobic digestion instead ofincinerating the coffee waste in a heating plant. The results are to be presented as different businesscases in which different biogas plants are compared with the reference case (heating plant),comparing costs and environmental impacts.There are two major environmental benefits from producing biogas; reduced carbon dioxideemissions from when fossile fule is replaced by carbon neutral biogas, and reduced emissions fromreturning digestate from the bio reactor to farmland instead of using industrial fertelizer.In order to determine the biogas potential in coffee waste, a couple of properties had to bedetermined in a laboratory. Properties such as the dry substance content, heating value, moisturecontent and ash content. The results show that 100 tons coffee waste could produce around 16 500Nm3 biogas which would contain 163 MWh.The biogas reactor and upgrade plant both need energy gas to function and uses around 14 MWh ofthe produced gas.

This report is about how to decide which method is the most suitable as floor covering at projectKlammerdamm in the centre of Halmstad. The covering has to be fire resistant and soundproof inorder to protect the wood structure and stop noise from traveling between apartments. There aretwo possibilities either traditional gypsum board or gypsum-based self leveling underlayment.The roads around the construction site are narrow. A regular twenty-five meter long truck has nopossibility to reach the site. The construction site is small and the storage area is limited.

To fulfill the climate target that EU and the Swedish government have decided to apply, it becomes increasingly important that the energy efficiency of existing buildings and making new buildings energy efficient as possible. Of Sweden?s total energy consumption in 2011 was 40% used by residential and service. Of the 40% of the energy consumption was 60% used for heating and domestic hot water. A report from year 2012 shows that one reason why the heating volume is so great could be due to underestimating on the energy consumption for the heating in the planning of the building.

The purpose of this thesis project was to study how different companies are working with LastTime Buy and through that study propose improved ways of working with this for Scania CVAB. The project aimed at studying the work processes from three different perspectives:decision models, quality aspects and liability aspects between companies.To study this, qualitative interviews with one or several representatives from differentcompanies that are affected by or involved in Last Time Buy were used. Representatives wereselected partly from Original Equipment Manufacturers, suppliers, component manufacturersand companies offering third part solutions for Last Time Buy. The companies also reflecteddifferent industries. The interviews aimed to create an understanding for the methods used atthe different companies but also the ways of thinking and the knowledge behind the choice ofthese working methods.The analysis shows that the Original Equipment Manufacturers used very similar decisionmodels for Last Time Buy, but that external factors or the company strategy made them reachdifferent results.

During the past 30 years the fuels for energy production in heating and power plants have changed. Fossil fuels have decreased in usage whereas bio fuels in Sweden have increased with 60% since the 1970's. Different fuels affects combustion and the release of various substances and particles into the flue gas. This is caused by the diverse components and chemical structures of fossil fuels and bio fuels. When the flue gas leave the combustion chamber and enters the path to the chimney particles in the gas are being transported out of the combustion chamber.

The subject of this bachelors degree project is an interior layout for road ambulances.Landstinget Västernorrland (LVN) wanted a layout concept that would be used to com- municate their design intentions to the ambulance producers during their purchase process.Designing ambulance interiors is an extremely complex process since there so many fac- tors to take into consideration. It ?s not just about taking the equipment and place it where there is space left in the cabin. You have to start with the user in focus and the tasks that are to be performed in the ambulance environment.It ishard to find design solutions that will fit 100% of the ambulance personnel?s working routines for 100% of the tasks.

A patient simulator for testing anaesthesia machines has been developed at Maquet Critical Care AB, to reduce costly and time-consuming experiments on animals. The device simulates human lungs regarding lung dynamics and volume, uptake of anaesthetic agents and the production of carbon dioxide, heat and moisture. Further demands on the simulator are durability and size; the device shall be compact enough to be moveable.The resulting simulator fulfils the requirements and enables better repeatability and ability to test extreme cases than experiments on animals do.Uptake of the anaesthetic agent is achieved in a active carbon filter and controlled by regulating the flow. The flow is created by a regenerative blower and controlled using a proportional valve. The uptake can be set by the user or by a simple uptake model modified to recursively handle changes in the concentration of anaesthetic agent.Carbon dioxide is fed into the system from a tank by a mass flow regulator.

The kitchen is one of the most important rooms in our homes. It is a place for social engagements, meetings between people and activity. How the kitchen looks today is a concept sprung from the Swedish kitchen standard of 1952. Eventhou this standard no longer exists it is a model of how kitchens are designed today. The kitchens most often sold today come from one of four major kitchen manufacturers in Sweden.My thesis investiges an alternative kitchen concept.

Arbetstillfredsställelse kan definieras som ?en positiv (eller negativ) evaluerande värdering av arbetet eller arbetssituationen? (Kaufmann, G.,  & Kaufmann, A.  2005 s. 269). Denna studie fokuserar på delaktighet,  arbetsinriktning, fysiska betingelser, lön, ledarskap och sociala betingelser som delar i arbetstillfredsställelse. Syftet med studien var att undersöka hur extraarbetande högskolestudenter på lager uppfattade sin arbetstillfredsställelse, därför intervjuades nio studenter varav tre kvinnor i åldern 21-33.

Fuel wood is currently the third largest assortment from the forest in Sweden after pulpwood and lumber. Branches and tops i.e. logging residues are one of the assortments of fuel wood which is a common by-product after harvesting nowadays. The way to utilize, disintegrate and transport the logging residues varies between northern and southern Sweden. Branches and tops are collected throughout the year at appropriate stands, but are consumed mainly wintertime.

The goal of this paper is to provide a model for a sustainable electricity system to an island, in the Pacific Ocean near the equator.The method which has been used is to model supply and demand of electricity in the computer program Stella, through the creation of a dynamic system that balances them against each other. The result from the model will then be used to calculate the electricity price per kWh for the island.The result of the work is that electricity from solar energy is comparable with electricity produced from oil, if the oil pays for all its external costs, and the potential for pumped hydro storage plants is located. It also requires that consumers of electricity can be their own producers to avoid the expenditure of tax and reducing the cost of distribution. But since oil is a finite resource and has had a rising cost in recent years, while solar energy has had a declining cost, perhaps this will be a more competitive solution in the future.