Aeroseum is an aviation museum located in an old military underground hangar. The ventilation system in the hangar is designed for the military purpose of the hangar. This design includes a solution with air flowing through the space between the construction of the hangar and the rock surface. The solution is intended to avoid a buildup of inflammable gases. This design leads too high humidity levels in the hangar.

Human existence and welfare depend on functional ecosystems. Ecosystems are critical to sustain life-support services for human well-being. One method that visualizes that humanity requires ecosystem services for resource consumption and assimilation of produced waste is ecological footprints. This study focuses on the ecosystem service carbon sequestering. A quantification of this ecosystem service showed the potential for accumulation of carbon in different ecosystems in Stockholm and Norrbotten County for the years of 1995 and 2004.

Global warming is a huge issue that humans have contributed to through over-exploitation of natural resources and extensive usage of fossil fuels. Now more than ever, we need to embrace a recycle thinking and reuse our waste, for example through producing biogas from our food waste. The purpose of this report was therefore to identify the energy usage and emissions resulting from the biogas chain which spans from Solna Stad to Uppsala Vatten. Furthermore, potential efficiency improvements were to be identified and proposed. This report focused mainly on the first part of the biogas chain that includes the collection of the food waste and the reloading process.

The horse is a homeothermic animal and to keep a constant body temperature in winter season is important. Acclimatisation is to provide means for a good thermal insulation consisting of skin, hair, and an outer air layer. The skin covers the horses body and it is composed of three main layers where the top layer of the epidermis consists of dead keratinized cells that are constantly being sheed. The dermis is composed of collagen connective tissue that give the skin its strength. The bottom layer with subcutaneous fat provides a thermal insulation and can be used as an energy reserve in cold weather.

Fuel pellets are a refined bio fuel mostly consisting of residues from sawmills and wood industry. At Rindi Västerdala AB's combined bio energy plant in Vansbro fuel pellets are produced, while the waste heat from the process is used for district heating. The pellets are produced from sawdust, wood shavings and dry wood chips that is dried, milled and pressed into small cylindrical rods. The advantage of refining the wood material in this manner is that the energy value is greater per unit volume and unit weight, thereby the cost of transportation per energy unit is reduced. Also, less storage space is needed.Pellet manufacturing is a complex process since many parameters affects the final results.

It is important to construct or recreate different types of wetlands and study their retention of nutrients, since knowledge of their effectiveness in this matter is poor. In 2003 a wetland was constructed on an old meadow on the western shore of Lake Bornsjön in central Sweden. The main purpose of the wetland was to reduce the amount of phosphorus entering the lake, which is the back-up water supply for Stockholm when the city cannot obtain water from Lake Mälaren. Large areas around Lake Bornsjön consist of agricultural land and the nutrient concentrations in the inflows to the lake are usually relatively high (approx. 1 mg/l total nitrogen and 0.05-0.1 mg/l total phosphorus).

The purpose of this thesis is to investigate and clarify the facts surrounding one of Vattenfall's district heating plants; The "solar field" and associated rock cavern in Lyckebo, Storvreta. The plant was built in the '80s by the formerly municipal utility,Uppsalakraftvärme AB, as an experimental building. A ground water filled cavern would serve as seasonal storage of solar heat from an adjacent solar field. Since both the energy company and the facility itself has undergone major changes over the past 30 years, there was a great need to gather facts in order to provide a picture of its current condition and potential for continued use. The thesis investigates the plant's history and problems with the rock cavern losses, and how the operation developed. It also presents the calculations regarding the possibilities of again supplementing the facility with solar energy - which is not the case today - as well as the economic conditions for it. Regarding a re-launch of solar energy, primarily a concentrating solar collector has been studied, as it has the advantages of an integrated control system.

Volvo Trucks is the second largest manufacturer of heavy trucks, with factories in several countries and with around 21 000 employees. At the plant in Tuve, trucks have been built since 1982 and the activity mainly consists of producing side members and to assemble and packing kits of trucks. In 2005, the factory in Tuve launched the ambition to be the first carbon dioxide neutral vehicle factory in the world. This will be implemented by streamlining and investing in renewable energy. The aim of this degree thesis is to map the usage of energy within production, and also to prepare a method to measure key figures (use of energy per produced unit).

The energy consumption in the sectors of residential and public buildings is 40 % of the total energy consumption in Sweden. The main part, 85 %, of the energy use in these sectors is for operation of the buildings. The rest is used in the building process. When energy-efficiency measures are taken the energy use during the operation time decreases and the fraction of energy consumption during the building time increases. This project is carried out in cooperation with JM AB and concerns the energy use during the building time of production of blocks of flats at the building site.The main part of the electricity that is used during the production of apartment buildings goes into the heating of portacabins and illumination of the building during the construction phase.

Problems with the current energy system, which partially relies on non-renewable fuels, are increasingly recognized. Emissions of greenhouse gases from fossil fuels may speed up global warming, which in turn leads to a number of negative consequences. Nuclear energy is risky and relies on consumption of a scarce resource. This leads to a demand of renewable energy that is also economically feasible. One possible renewable source of energy is solar energy.

Mitt examensarbete innefattar en fönsterutredning för radhusområdet Skeppsvägen i Bålsta. Fastighetsägare är Håbohus AB och examensarbetet har skrivits för Skanska Sverige AB. Arbetet har skrivits på plats i Bålsta där Skanska Direkt AB har eget kontor och erhåller idag totalentreprenaden för renovering av Skeppsvägen. Arbetets syfte är att klart och tydligt redovisa eventuell effekt och energibesparing vid byte av befintliga fönster och altandörrar.Undersökning av fönster och altandörrar har gjorts okulärt, med värmekamera och med fuktkvotsmätare. Vid den okulära besiktningen noterades färgsläpp på fönster.

With increased deployment ofintermittent renewable energy, such aswind and solar power, energy storagebecomes necessary to help reduceproduction peaks. Thermoelectric EnergyStorage is a method still in researchphase, which stores electricity in hotwater at a temperature of 120 ° C. Thisthesis aims to examine whether theThermoelectric Energy Storage would bepossible to integrate into existingpower generation such as a combined heatand power plant, and how the technologypotentially could function in theelectricity market. ThermoelectricEnergy Storage consists of a chargingprocess and a discharging process, bothoperating by the working fluid CO2. Toincrease the efficiency of theThermoelectric Energy Storage, wasteheat from the district heating networkis integrated.A model of the Thermoelectric EnergyStorage has been developed and it wascalculated by thermodynamic propertiesof the working fluid, CO2, in thevarious process steps.

This examination work brings up opportunities to invest in a construction for heating with grain or pellets on farm level. As example we have chosen Fröberga Gård which is a farm located in Östergötland outside of Söderköping. The farm`s residential buildings is to day heated with oil and electricity. The result of our investigation shows that heating with grain is the best alternative, partly because of economical issues but also because you can grow the grain on your own farm and by that you can get better economy in your seed cultivation. To grow 16 tonne of grain as is needed demand gives a insignificant increase of work. Further an advantage is that no investment in machines is needed because all the machines witch is needed already is in use on the farm. In a situation where a new investment is needed as in the case we studied, is it often profitable to invest in a integrated furnace. Because all the components are well adapted to each other, and because that gives a high efficiency. If you already own a well working furnace is it often most profitable to connect a burner to it. It is important to know that heating with grain need more work than heating with pellets, because the high contents of ash in grain. Even if you choose pellets instead of grain the calculation shows good results. Because peat is an excellent but fairly untested raw material for pelletsproduction we have chosen to watch little more on its quality and conductions. We discovered that peat has a high heating value which makes it possible to raise the heat value in pellets through mix up peat and wood. Or you can make pellets with only peat and get a pellet with high heating value. Even the calculation with peatheating shows good results..

Aeroseum is an aviation museum located in an old military underground hangar. The ventilation system in the hangar is designed for the military purpose of the hangar. This design includes a solution with air flowing through the space between the construction of the hangar and the rock surface. The solution is intended to avoid a buildup of inflammable gases. This design leads too high humidity levels in the hangar.

Hungary?s share of renewable energy in 2010 was 7.9 %, and their renewable energy goal for 2020 is 14.65 %. Geothermal energy is one option that could help to achieve the goal, since Hungary has favorable bedrock, the temperature gradient is above average and thepermeability is high. Today Hungary is importing just over half of its primary energy supply. Because of political conflicts between nations Hungary wants to expand its own production of energy.