Uganda is one country with fastest growing populations in the world and with more than 25% of the population living in poverty. There is a rapid rural urban migration with increasing demands for food for low income earners especially in these areas. One way to mitigate food insecurity is to increase milk and meat production efficiency, and thus reproductive performance of cows is crucial for good production. A well-documented strategy for improving dairy cow productivity through faster genetic improvement is to breed dairy cows using proven semen via artificial insemination (AI). AI has been used in Uganda for over 60 years but only less than 10 %, a small population of the country?s herd has been bred that way. The aims were to study knowledge, attitude and practices factors influencing cow fertility results on dairy farms around Kampala using AI and to propose ways of promoting increased use of AI in Uganda.

Spitz nevus was first described by Sophie Spitz in 1948 as juvenile melanoma. The lesion is a benign melanocytic tumor, which consists of epiteloid- and spindelshaped cells. Histological is spitz nevus difficult to distinguish from malign melanomas and spitzoid melanomas. Loss of symmetry, loss of maturation in the deep component, nuclear polymorphism and hyper chromatic nucleus are features which can be found in melanomas. Some of these features are often seen in spitz nevus.

Bakgrunden till detta examensarbete var att Qumex Materialteknik vid ett flertal tillfällen konstaterat att material av typen SS 0725 har uppvisat bristfälliga härdresultat. Materialet, som är relativt nytt på marknaden, är ett gjutjärn av typen segjärn och utmärker sig gentemot andra segjärn på grund av sitt höga innehåll av kisel. Då segjärn enligt den nu gällande EN-standarden klassificeras efter sina mekaniska egenskaper uppstår ett problem gällande SS 0725. Materialet uppfyller de krav som är ställda för EN-GJS-500-7 och hamnar därmed under samma materialbeteckning som ett segjärn med betydligt lägre kiselhalt. Att två material med olika kemisk sammansättning hamnar under samma beteckning kan innebära problem.

In this thesis, input data for energy performance calculations on commercialpremises have been studied. In energy performance calculations, where internal heat gain parameters are unknown, template values that, in a reasonable way represent the activity in the room, are necessary. These values can be used as input data for whole-year calculations, or for calculations on shorter periods of time.The purpose of the Sveby project is to create standardized work practice in energy issues for the construction industry. The work in this thesis is conducted to correlate with the purpose of the Sveby project, with aims of contributing with information and guidelines for the continuing work with commercial premises.In this report, suggestions for template values for internal gains parameters, based on research and calculations in the field are presented. Suggestions on how these can be implemented in a user-friendly way for two energy performance calculation software are also given, VIP Energy and IDA ICE.

I takt med stigande energipriser finner fler och fler det lönsamt att installera värmepump för att reducera sitt energibehov. Värmepumpar har dock svårigheter att tillgodose värmebehovet när utomhustemperaturen sjunker under -10°C. Detta problem kan minskas med så kallade economizerkopplingar, denna rapport jämför de båda economizersystemen flash tank cycle (FTC) och internal heat exchanger cycle (IHXC). Eftersom det har visat sig att vinsterna med economizerkopplingar är som störst då temperaturlyftet är stort är det mest intressant att jämföra dem i luft/vatten värmepumpar. Detta på grund av att övriga applikationer som berg-, jord- eller luft/luft-värmepumpar inte utsätts för samma stora temperaturvariation då utetemperaturen faller.

Sverige har en hög andel installerade bergvärmepumpar, som är en typ av vätska-vatten värmepump. Ett problem som finns för befintliga bergvärmesystem är att berget med tiden kyls ned då returslangen till borrhålet konstant levererar kyla till berget. Till följd av detta mister systemet en betydande del av sin verkningsgrad samtidigt som det i extrema fall kan leda till permanent isbildning i borrhålet.Ett sätt att motverka detta problem är att tillämpa termisk energilagring i bergvärmesystemets borrhål. Den internationella benämningen för denna teknik är ?Borehole Thermal Energy Storage, BTES?.Rapporten har behandlat en friliggande enplansvilla med ett befintligt bergvärmesystem som tillämpar termisk energilagring i bergvärmesystemets borrhål med solvärme.

People who live in northern part of the world spend much more time indoors than those who live in warmer countries. In addition that home should be safe, it should also protect one against heat, cold, sunlight and pollution. The indoor environment is affected by installations, material and how the building is formed. Those anomalies that are visible, felt or smelled can be noticed and be rectified. But it?s much more difficult if these abilities are missing.

A study to optimize insulation thickness for stock-, industrial- and office-buildings for external walls and roof in an economical perspective has been conducted on behalf of DynaMate. DynaMate?s role is to maintain all Scania?s buildings. Analysis has also included other parts of the building envelope, such as windows, exterior doors and industrial doors. In this thesis, three different types of exterior wall constructions has been investigated, these are a sandwich design consisting of sheet metal and a another one consisting of concrete, as well as a wall of concrete with a coating of plasters.

Cumulative effects are seldom treated in Swedish Environmental Impact Assessments (EIA). This report treats these questions and which procedures and methods that can be used when assessing cumulative effects in EIA. This report is a literature study where also a case study is a part. The case study shows how existing methods for cumulative effects can be used in practice. The report is concentrated on biology and treats cumulative effects on premises of biodiversity and roads. Cumulative effects include both direct and indirect effects.

At seed-growing the aim is to produce a commodity with high germination capacity, good soundness and purity, and also slight admixture of seeds from other species. The capacity of germination and the vigour of the seeds may become impaired in consequence of mechanical damage, infection of diseases, growth of mould, attacks of vermin, high drying temperature, secret germination, sprouting in the ears etc. The germ belongs to the outer and most unprotected parts of the seed, and consequently this is much exposed. Even quite sound seeds can instantaneously have low capability of germination. It can be due to the fact that the seeds are in rest of germination, i.e.

There are records of lowering of the water level in a lot of the Swedish lakes from the middleof the 1700th century. The aim was gaining more areable land to meet the needs of more foodto support the expanding population. In areas with top soil which contents of clay or loam asin the southwest of Scania in southern Sweden this was proven to be a successful wayexpanding the total outcome of the harvest.The studied area in the northeast of Scania, though, consists of morain with a lot of mires -much less nutritious conditions. When the water level is lowered the atmosphere gets accessto the peat. The dissolving of the organic matter that has been suppressed by the lack ofoxygene below water level continues.

Namibia, southern Africa, suffers from an energy shortage and is therefore facing severalchallenging problems. The use of firewood as fuel for cooking is common in the whole countryand has negative consequences for health and the environment. This work have focused ondeveloping a solar baking oven, calledSunbaker, adapted for Namibian families needs forbaking. The development was based on classic solar cooking limitations, specific needs forNamibia and to have a feasible manufacturability.The project started with a theoretical study in Sweden where different solar cookers, informationregarding Namibia, technical aspects and end user aspects were studied. To assess the need for asolar baking oven aMinor Field Study took place in Namibia during eight weeks in July toSeptember 2009 and resulted in a product design specification.

SAMMANDRAGLerums kommun har en vision om att bli Sveriges ledande miljökommun till år 2025 eller tidigare. En stor del av arbetet, som kännetecknas av hållbarhet, kreativitet och inflytande, sker i Gråbo. Det är idag en ort som känns bortglömd och är lätt att passera utan vetskap om dess placering. Samhället har såväl synliga baksidor som är i behov av förbättring och förnyelse, som outnyttjade tillgångar som bör lyftas fram.Syftet med föreliggande arbete är att ta fram förslag på hur Gråbo kan förbättras både med avseende på hållbar samhällsutveckling samt estetiska och funktionsmässiga förbättringar av samhället.Arbetet påbörjades med en faktainsamling, som sedan låg till grund för en inventering på plats i Gråbo. Detta sammanställdes till en analys där tillgångar och problem presenterades med hjälp av Adobe Illustrator till flera kartor.

The main purpose of this thesis has been to find a way to evaluate the soil parameters for the Total sounding method (TS), such as the inner friction angles and settlement modules. This study only includes an analysis of soil profiles from the Stockholm region. The chosen location for the study is a proposed residential area east of Igelstaviken in Södertälje. Presently, the subject plot is located in a residential area and is also adjacent to a school area.Total sounding is originally a Norwegian soil testing method. The differences between the sounding methods (weight-, ram-, CPT-sounding) are for instance how the sound is driven into the ground and what kind of parameters that are registered.

This Master degree project has been performed at the Braviken paper mill on papermachine 53 (PM53) which produces newsprint paper. The current economic situationhas contributed to declining demand for newsprint, which means it is extra important tobe competitive by high energy efficiency. Particularly as energy prices are expected torise when the economic growth returns.One way to increase energy efficiency is by reducing the water use in paper and pulpmills and consequently save energy through reduced heating of water. The thesis's maintask is to evaluate whether a water purification plant (microflotation plant) forpurification of process water in PM 53 is profitable. The microflotation plant enablesreuse of warm process water instead of losing the energy to receiving waters.