The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

Högbytorp is Ragn-Sells? largest waste facility and it is located north of Stockholm. There is an old landfill still in use, but at the end of this year it will be closed. The waste deposited on the landfill can, through decomposition, give rise to a large amount of methane gas, which is an energy rich gas that can be used for heat and electricity production. To receive a relatively large amount of gas, the decomposition requires a high moisture content in the waste.

AbstractIII-essay in political science by Christoffer Harnell, autumn -08. Supervisor: Malin Stegman-McCallion. ?Nuclear Disarmament - USA and the Soviet Union 1960-2002? This essay is about USA and the former Soviet Union and their nuclear disarmament. The purpose is to explain why and when the two states begun their nuclear disarmament, as well as what caused the start of the process.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

The aim of this study was to evaluate the stir drying method, for drying of grain during Swedish conditions. The evaluation was done during the harvest year 2004, on four farms with stir driers. The driers were evaluated for their energy consumption, design, stirring effectiveness and how much time the farmer has to spend on every tonne of grain. A comparison was also done with conventional Swedish high temperature driers. Totaly six batches of grain from stir driers were examined, mostly winter wheat, but also barley and wheat.

Emission of nitrogen oxides as well as carbon monoxides is an inevitable result of combustion. A Swedish law "Law of environmental fee for emissions of nitrogen oxides as a result of energy production" (lagen om miljöavgift på utsläpp av kväveoxider vid energiproduktion (SFS 1990:613)) controls the emission of NOx from energy production by a system of fees. The system has resulted in a strong approach toward less emissions of NOx among the energy production plants. High emission levels, today exceeding 52 mg/MJsupplied fuel, leads to costs for energy production companies. This paper examines possibilities to reduce the emissions of NOx by optimization of the SNCR-technique in a biofuel fired heat and power plant.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

In the EU the amount of waste increased by 14 percent during the years 2000 to 2010. EU?s target to reduce waste generation runs parallel with the aim of increasing the efficiency and profitability aligned with energy recovery. In Sweden the energy recovery through incineration is increasing steadily, and 46 percent of the municipal solid waste (MSW) is treated by combustion. This report aims to examine the profitability of processing MSW into Refuse Derived Fuel (RDF) from an economic-, energy- and environmental perspective.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

The aim of this essay was to study the nitrogen flow in two willowplantations, at different locations in the south of Sweden, that wereirrigated with sewage. The study was also performed to compare thedifferences in nitrogen flows between two years, 1998 and 1999. The studywas made in three parts. First, the denitrification activity was measuredusing the acetylen inhibition method. Second the nitrogen flow, as well asthe water- and heat flows, were modeled through the SOIL-SOILN-modelThird; the nitrogen flow was calculated to compare with the results fromthe model.The results from the measurements were then compared with the resultsfrom the SOILN-simulations to detect differences in the denitrificationrate.

The EU's Water Framework Directive aims to a long-term and sustainable use of our water resources and wants to ensure good water quality in Europe's water bodies. Discharge of polluted stormwater into receiving waters can be a threat to their ecological and chemical status. Municipalities are responsible for supervision of the environmental quality standards (EQS) and therefore need to gain knowledge of current stormwater management, the expected level of pollution emissions and possible appropriate purification steps to ensure that the goal of good water quality is achieved.This master thesis aims to provide this knowledge in the example case of Vallentunas urban area and wants to prepare future oversight so that it can be assessed how much the discharge of polluted stormwater into the local receiving water is a threat to its status. With the help of maps, aerial photographs, site observations and individual discussions those areas are mapped where appearance of moderate to highly polluted stormwater could be suspected. The degree of pollution at the discharge points is determined based on land use upstream and uses standard values according to the administrators assistance "Tillsyn av dagvatten" (MSL 2014).The study identifies 100 areas in need of supervision regarding their stormwater management.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

The background for this degree thesis is a need to replace the existing seal used to protect equipment containing secret or sensitive equipment used by Swedish Defence. The target design should satisfy both the need for tamper evidence and reduce Life Cycle Cost. In developing a new design for a seal, additional benefits such as improved logistics support and indication of attack methods such as heat and solvents have been considered.The lack of guiding principles for end users of seals became evident during the interviews. Major concerns for the future are education of users, information about actions if a seal is broken and user liability.The design work was divided into several phases. A feasibility study was performed including investigation of theory of labels, materials and possible technologies.

Biogas is a renewable energy produced through anaerobic digestion, which means that organic matter is degraded by microorganisms under anaerobic conditions. The produced biogas can then be used for cogeneration, electricity, heat or upgraded to vehicle gas. Eskilstuna Energy & Environment AB has four digesters at Ekeby water sewage treatment plant, Eskilstuna. One of the biogas reactor (RK4) is equipped with a jet-mixing system while the remaining digester uses top-mixing. The mixing system is an important parameter to achieve optimum operating conditions for the process regarding gas production and degree of digestion.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.