Sök:

Sökresultat:

1850 Uppsatser om Heat load characteristics - Sida 34 av 124

Lastfördelning och effektmätning med Arduino och PLC

Detta arbete var beställt av Sjöfartshögskolan i Kalmar. Skolan ville ha en enhet som kunde mäta aktiv-, reaktiv- och skenbar effekt, ström, spänning, frekvens och cos? på en generator och som kommunicerade vidare dessa värden till en PLC. Detta för att kunna lastfördela lasten mellan ett antal generatorer i kursen Tillämpad elteknik 15 hp där studenterna bygger en generatorinstallation med tre generatorer. Ett funktionsblock för lastfördelning skulle också programmeras.

Lågoffsetkomparator

Detecting small signals with a comparator demands that the total voltage offset is lower than the actual signal. The total offset includes the voltage offset in the comparator and the voltage offset that is created by the offset currents that flows thru the load at the comparators input. The goal with this comparator that has been developed has been that it will have a total voltage offset at maximum 500 uV. The comparator does not need to be extremely fast or does not need to operate in a big frequency area. To have all the flexibility that is needed a full custom technique is used.

Belöningssystem och generation Y i IT-branschen

Denna studie syftar till att undersöka huruvida arbetsmotivationen skiljer sig mellan generation Y och tidigare generationer i den svenska IT-branschen. Studien vilar på en teoretisk grund bestående av tre välkända teorier inom arbetsmotivation; Herzbergs tvåfaktorteori, Self-Determination Theory samt Job Characteristics Model. För att kunna besvara studiens forskningsfråga ?Hur kan belöningssystem utformas för att ta hänsyn till fler anställda från generation Y i den svenska IT-branschen?? genomfördes en semistrukturerad intervju med en HR-chef samt en enkätundersökning bland anställda på IT-företaget Evry. Resultatet av studien visar att det finns vissa skillnader i arbetsmotivationen mellan generation Y och tidigare generationer vilket kan motivera till förändringar i hur man arbetar med belöningar när en allt större del av arbetskraften utgörs av generation Y. En viktig skillnad som framkom är att medarbetare från generation Y uppskattar feedback mer än äldre medarbetare, oavsett varifrån i organisationen feedbacken kommer ifrån. Studien fann även att monetära belöningar kan ha en stark negativ inverkan på arbetsmotivationen, men att de under vissa omständigheter kan vara positiva och ibland även nödvändiga.

Digitala material med egenskaper: Rådande trender inom media : En analys av en framstående designtrend

This paper is to identify and analyze a new trend which we believehas taken off, based on qualitative interviews and analysis of three productions which we have been involved in during a practiceperiod of two months with a production company in Stockholm. This essay intends to define this trend as an organic formation of digital material and to identify the key characteristics which form the basis of how to create a production of this nature..

Försäljning av närvärme :

To provide our company a new business opportunity I have in this essay examined the economical possibilities to sell energy. I have chosen to do a case study on my own farm in this essay. The farm is focused to cropping and also have some properties for hire. The farm is situated in the village of Fjelie and that?s where the opportunity for selling heat are. Fjelie has about forty houses. The idea is to build a plant where straw is being used as fuel.

Metod för användning av Geografiska Informations System vid långsiktig vägplanering : en studie genomförd på Sveaskogs marker i Norrbotten

The forest industry is one of the most important industry branches in Sweden. Since the demand of high precision wood deliveries has increased, the demand on a well constructed forest road net also has increased. A good road net gives the wood-supplier competition advantages and also increases its service level towards its customers, lumber-mills and pulp-mills. In some parts of Norrbotten, the road net is still insufficient and not yet built out enough, and that is why it is important to know how to act and where to improve the road net in these areas. The purpose of this thesis was to create a work-model for long term road planning in areas with no road net or a not yet complete road net. The model has been created in an ArcGis environment, where a long chain of tools has been tied together with the program ?Model builder?.

Stubbtransporter och bränslekvalitet hos stubbved :

Stump wood is a hot alternative when the heating plants demands more and more forest fuel. The aim with the study has bean to calculate the costs in four different systems for transportations of stump wood, examine if there are any differences in fuel quality for the stump wood in the different systems, analyse if the fuel quality in stump wood is affected with the time it lays by the road side and how much space the stump wood demands on the road side. To calculate the costs for the different systems a system analysis was carried out, where some of the costs were collected through field studies on Holmen Skog stump experiment and other costs were collected from literature and contacts. Data for the fuel quality study was collected from Eons heat plant in Norrköping. Data for the study of how much space stump wood takes along a roadside was collected from field studies.

Projektering av småhus med solvärme som huvudkälla

In this report a study has been done regarding different heating systems on which are the mostcomprehensive with solar heating systems. The report has also been focusing if solar power can beused as a primary heating source for supplying more than 50 % of the buildings total heatingproduction. The University of Dalarna constructed a demo-house for this purpose and according tocalculations the total solar usage is more than 50 %. This house has been made for referenceregarding the design of the heating system of property 5:37.Further studies have been made to compare different heating systems that are compatible with asolar system, where the compared systems purpose is to be independent of direct using electricity. Asystem of this design is regarded as sustainable according to environmental as economic issues.

Högeffektslysdioder. Möjligheter och förutsättningar för högeffektslysdioder som belysningskälla - ett demonstrationsbygge

This report examines the prerequisites for LEDs to replace other technologies indifferent applications. How does the different technologies for light generationwork and what are the advantages and disadvantages? The various technologieslimitations and characteristics provides the opportunities for the LEDs.This report describes a test-construction built to examine what practical arrangementscan be built with modern light emitting diodes, in order to showsome of the possibilities. The construction consists of three different applications,a high power lamp based on cold white LEDs, one based on warm whiteLEDs for the evaluation of the light characteristics and a RGB-LED based lampable to mix any colors quickly and seamlessly. The test construction also containsthe essential peripherals including control-electronics, optics and a custombuilt watercooling solution.The potential for LEDs is huge but it is complicated to build LED based applicationsdue to the limitations which mainly includes the electronics and theneccesary cooling.

UTVECKLA OCH ANALYSERA INSTRUKTIONER MED COGNITIVE LOAD THEORY: ANIMATION VS STATISKA BILDER

Undersökningen ämnade se vilka fördelar och nackdelar som finns med animerade instruktioner jämfört med bildinstruktioner. För att göra detta så fick ett antal personer testa att vika origami med hjälp av antingen bildinstruktioner eller animerade instruktioner. Resultatet baserades på aspekterna tid, resultat samt utveckling. Undersökningen visade att animerade instruktioner hade mycket högre läsbarhet än bildinstruktioner men att det var svårt att se huruvida personer blev bättre på att vika origami..

En experimentell studie av vulkaniseringstidens och vulkaniseringshastighetens påverkan av värmeväxlarpackningar

A two-factor design of experiments done on GGAB for the identification of two selected factors influence on the length of the scattering of heat exchanger gaskets. The work consists of four parts: study, choice of survey method, the performance of investigation and analysis of the results. Chosen factors on the study are considered to be the most effecting of the length distribution of seals during the production of GGAB. The study is the first of its kind both in GGAB and in the rubber industry and has an experimental nature..

Ledande individers effekt på organisationen

This study is conducted with a focus on managers and its different forms as found in a nation wide Swedish bedroom specialist-organisation, Sängjätten. Leadership is perceived in many forms and depends on a large variety of factors within and outside the organisation. One of these factors is ownership and the characteristics these imply on the forms in which the manager works. Within the studied organisation there were two distinctive forms of ownership regarding to the stores we studied; such as franchising compared to the franchiser owned through a national headquarter, so-called ?self-proprietary stores?.

Konstruktionstudie av en ångexpander

This thesis applies to a novel steam expander, one part of a steam engine system, a wobble plateengine. The piston in the expander moves axially with the outgoing rotating shaft and is locatedon a plate, why the engine type is called axial engine. When steam is applied to the plungers theplate wobbles creating a rotation on the shaft going thru the wobble plate. The steam expander issupposed to be used in exhaust gas recovery (bottoming cycle) applications and small scaleenergy production. The commissioner is Ranotor Utveckling AB.

Scilla-släktets användningsmöjligheter i Sverige : med utgångspunkt i ståndort, egenskaper och historia

This study investigates the main question ?How can the small, blue spring bulb genera Chionodoxa, Puschkinia and Scilla be used in Swedish outdoor settings, with main focus on the genus Scilla?? This is done by answering four sub-questions: Which of these Scilla-species are hardy in Sweden? Which are their characteristics and habitats? What does their history of application look like? What is commercially available today? The aim of the work has been to make a survey of hardy and available Scilla-species, their character-istics, field of application and history. The purpose is to create a tool in the work with geophytes in different outdoor settings in Sweden, and to contribute to the discussion of new fields of application for bulb plants, such as Chionodoxa, Puschkinia and Scilla. The questions are answered through literature studies and discus-sions with knowledgeable persons in the field. First, an investigation and a survey of Scilla-species hardy and commercially available in Sweden, will be presented, where information of appearance, charac-teristics, habitats, varieties and historical and present application of the species will be found. With this background, a discussion around all the questions, today?s use and also new fields of application, has been carried through. The conclusions made from this study, are that there are today 15 Scilla-species commercially available and hardy for the Swedish climate.

Mobbing : Personlighet, kön och andra faktorers påverkan på människan

Mobbing är ett socialt problem. Därför skapades denna studie för att se om samband råder mellan mobbad, mobbare och personlighetsegenskaper. Dessutom gjordes en könsfördelning för att se om det råder några signifikanta skillnader i händelse, kön och personlighet. För att få svar på dessa syften ställdes frågorna: Hur ser mobbingen ut och vilka drabbas? Har kön och personlighetsegenskaper någon betydelse för om man blir mobbad eller utsätter andra för mobbing? Till hjälp användes en kvantitativ undersökningsmetod.

<- Föregående sida 34 Nästa sida ->