A new build in the Swedish nuclear power system would entail increased re-quirements for the proposed repository, which is adapted after the reactors of today. With a fast reactor, capable of burning nuclear waste, operating in parallel with the light water reactors, the increased requirements on the repository could be reduced.In this thesis, simulations of a light water reactor and a fast reactor have been performed by using the Monte Carlo code Serpent to investigate the changes in the fuel inventory. The light water reactor in the study is a boiling water reactor and the fast reactor of the type sodium-cooled fast reactor and they have been used for three different operation scenarios.By studying the fuel composition and the results from the simulations of the three scenarios conclusions can be drawn. Conclusions regarding the change of the fuel inventory and decay heat in Clab as well as the interim storage facility and in the repository. Depending on the operation alternative the changes dif-fered significantly and especially regarding the mass of burned actinides for different fuels in the fast reactor.The lowest increase of fuel assemblies was meet when using 50 years old fuel with 20MWd/kg U burnout and 2,0 % enrichment for start up of the fast reactor and 30 years old fuel assemblies with 50MWd/kg U burnout and 4,7 % enrichment for the further operation of the reactor.The increase of the number of fuel assemblies was 3174, which is equivalent to 641tons of heavy metal.

Summary Today energy prices are rising. As a result biomass fuel is getting more and more interesting. Wood chips is very popular, but also straw from grain production is on the table. Lunds Energi AB project a combined power and heating plant in Örtofta out of Lund. Wood chips is meant to be the main energy source, complemented by straw. In this thesis the transportation of straw for fuel is studied.

Voltage sag indices are a way of quantifying the performance of the power supply, as far as voltage sags are concerned. Indices can be defined for individual events, for individual sites, and for a whole system. A standard method for single-event methods is part of IEC standard 61000-4-30.This thesis emphasizes the importance of voltage sag indices and different methods for calculating three-phase voltage sag characteristics. Three-phase events measured in a medium network voltage over period of one month were analyzed, results examined and statistically evaluated. An algorithm for calculating voltage sag characteristics and indices was created in Matlab.

The number of data centers and their capacity is increasing throughout the world. Theenergy used in these data centers and the emissions from the use are increasing at thesame rate. The total use of energy will double from 2008 to 2011 based on the trends indata centers use. Research in this area says that the emissions from data centers willhave surpassed the level of airline traffic in 2020. The index used today to compare howefficient a data center is, called PUE, is lacking some information.

A new type of device for measuring thev m& ?rate of fuel sprays from a diesel fuel injector has been developed and the various steps in the development are described. The device works by deflecting all of the sprays from the injector at the same time by using a bell shaped deflector. A load cell consisting of a machined steel part with strain gauges mounted on it measures the resulting force. The shape of the curvature in the deflector bell shape has been evaluated by photographing the flow in a 2D?version of the curve shape.

Based on laboratory studies with lysimeters, the concentrations of dissolved reactive phosphorus(DRP) and particulate phosphorus, which is the main part of other P (OVRP), has been studied inpercolating water. The experiment was conducted through irrigation of small soil columnscontaining clay topsoil from an experimental field in Västergötland. Three rain simulations wereconsecutively performed. DRP concentrations in the percolating water ranged between 0.2 - 0.3mg·Lclearly related to the phosphorus concentration in the soil, measured in a soil extract ofammonium lactate (P-AL). Concentrations of OVRP were relatively low and ranged between0.12 and 0.16 mg·Lwas not proven and the experiment may reflect how a relatively slow percolation of water mayrelease DRP.

The central goal of this study was to compare statements of the minister of migration in power in 1994 with those of the minister of migration in 2006. The statements reflect two peaks of refugee immigration in connection to the war in former Yugoslavia and the present war in Iraq. The study analyses the statements in a critical discourse analysis framework. More specifically the aim was to find out if there were any discursive differences in these statements and how they might manifest themselves in society. The material was composed of 12 texts, 6 for each period originating from Swedish newspapers and from the ministers' public speeches.

The aim of this study was to identify what kind of masculinity is shown in 54 articles of the Swedish lifestyle magazine Magazine Café of 1993 and 2008, and in which way this masculinity may be different from eachother.The study included four magazine issues of each year with analysis focus on main articles and abolishment of reviews and press items.  The method was semiotic analysis with focus on manly characteristics and stereotypes. The result showed that the normative man pictured in Magazine Café in 1993 was a man?s-man interested in manly characteristic business as sports, outdoor adventures and women. Fifteen years later not much has changed. The manly characteristics are the same but they have been complemented with a man-by-man accepted and homosexually inspired vain..

Gunsta is situated about 10 km east of Uppsala. Today there are plans to establish 1000 new households in Gunsta before year 2030. The required energy for heating houses and water would be distributed via a district heating system, which also includes 200 existing residences. The annual required energy, according to this study, would be 16.2 GWh with a maximal peak effect of 6.9 MW. To meet this need, the study suggests a system with heat pumps to upgrade the 31?C water from a 1.8 kilometre deep borehole.

The number of studies on IFRIC 15 is very limited. The available studies have either been conducted before the introduction of IFRIC 15 or at an early stage of the implementation. This study examines IFRIC 15s practice from a longer perspective. The purpose of this study is to explain the effect that the interpretation IFRIC 15 has had on accounting objectives and qualitative characteristics of the revenue recognition of Swedish construction companies. The study will also analyze whether the construction companies has changed their perception of IFRIC 15 after applying it form a longer time perspective.

Arlanda airport is Sweden?s largest airport. The demand for comfort cooling of the airport?s buildings is high and is mainly provided by district cooling. District cooling is based on the same principle as district heating.

Our purpose in this paper is to examine if there is any profitability for a company with a factory in the timber industry to invest in a combined heat and power, CHP. Based on analysis and the results that the paper generates, we will give Derome AB a suggestion on how it is a profitable investment or not to installing in a CHP.By investing in a CHP plant, you can get a high efficiency, which means that companies can use their resources more effectively. The Swedish wood industry has by-products of production that can be used for combustion in their boiler which is an advantage.The essay is a qualitative study where we have a case company, Derome AB. In this company, we interviewed two employees who have knowledge in the study. They have helped us to provide information and data about their business.We chose to use the pay-off- and the net present value method, NPV, to see if there are profitable advantages for the investment.

This report is an outcome of a master degree project at Linköpings University in co-operation with Micronic Laser Systems AB. The purpose with this master degree project was to investigate how to implement a receiver in a data transfer system. The system consists of several data channels, where every channel consists of three parts: driver, transmission lines and receiver. The driver send low amplitude differential signals via the transmission lines to the receiver that amplifies and converts it to a single-ended signal. The receiver has to be fast and be able to feed an output signal with high voltage swing.

AbstractThe purpose of this essay was to investigate what thoughts children in preschool and preschool class have about friendship. We also want to investigate what characteristics and which strategies they look for in friendship relationships.  To perform this study we used the following questions as a starting point. Which characteristics do children see as attractive in their cultures?How are friendship relationships affected in different contexts?Can one see a difference in the most important characteristics and strategies between the children in preschool and the children in preschool class? To answer our questions and to reach our purpose we have held group interviews with children in preschool and in preschool class.  We have, in our study, used published scientific literature to get an understanding of what has been presented in relation to this topic in the past.The result shows that the children in preschool and preschool class do differ in certain aspects but also have some similarities on ideas about friendship. Both preschool children and the children in the preschool class are highly competent and skilled at integrating with other children. What divides them is their ways to plan their friendship.

When grains of wheat and rye are conventionally milled, large quantities of bran classified as by-products are left and are mainly used for animal feed. Bran is a complex material composed of the aleurone layer, nucellar epidermis, a seed coat, a fruit coat and a small proportion of the germ and endosperm depending on extraction rate. The bran fraction consists of approximately 40-50 % dietary fibre which can contribute to increase the nutritional quality of human cereal food. It would also be valuable for the food industry to convert by-products as bran to products with higher commercial values. The aim of this thesis was to analyse the content and composition of dietary fibre of heat treated wheat and rye bran according to the Uppsala method with some modifications in order to analyse soluble and insoluble dietary fibre separately. Half of the bran samples were precooked, dried and roasted and the other half dried and roasted (uncooked).