Sök:

Sökresultat:

1540 Uppsatser om Heat flow - Sida 54 av 103

Pelletskvalitet : Test av olika råvarumixer i pelletstillverkningen vid Rindi Västerdala AB:s bioenergikombinat i Vansbro

Fuel pellets are a refined bio fuel mostly consisting of residues from sawmills and wood industry. At Rindi Västerdala AB's combined bio energy plant in Vansbro fuel pellets are produced, while the waste heat from the process is used for district heating. The pellets are produced from sawdust, wood shavings and dry wood chips that is dried, milled and pressed into small cylindrical rods. The advantage of refining the wood material in this manner is that the energy value is greater per unit volume and unit weight, thereby the cost of transportation per energy unit is reduced. Also, less storage space is needed.Pellet manufacturing is a complex process since many parameters affects the final results.

Flow och prestation inom idrott

Syftet med studien var att undersöka hur människor upplever och hanterar risken att bli utsatt för hot och våld från klienter i arbetet. En kvalitativ ansats valdes vilket innebär att fokus har lagts på subjektiva upplevelser och erfarenheter av studieområdet. Studien genomfördes gentemot Socialtjänsten från två kommuner och urvalet bestod av intervjuer med elva socialsekreterare vars arbete innehåller myndighetsutövning och kontakt med klienter. Analys av data gjordes enligt induktiv tematisk analys. Resultaten visade att det föreligger en risk att bli utsatt för hot och våld av klienter men den upplevs vara liten.

Solvärme med säsongslager i Lyckebo

The purpose of this thesis is to investigate and clarify the facts surrounding one of Vattenfall's district heating plants; The "solar field" and associated rock cavern in Lyckebo, Storvreta. The plant was built in the '80s by the formerly municipal utility,Uppsalakraftvärme AB, as an experimental building. A ground water filled cavern would serve as seasonal storage of solar heat from an adjacent solar field. Since both the energy company and the facility itself has undergone major changes over the past 30 years, there was a great need to gather facts in order to provide a picture of its current condition and potential for continued use. The thesis investigates the plant's history and problems with the rock cavern losses, and how the operation developed. It also presents the calculations regarding the possibilities of again supplementing the facility with solar energy - which is not the case today - as well as the economic conditions for it. Regarding a re-launch of solar energy, primarily a concentrating solar collector has been studied, as it has the advantages of an integrated control system.

Signal- och bildbehandling på moderna grafikprocessorer

En modern grafikprocessor är oerhört kraftfull och har en prestanda som potentiellt sett är många gånger högre än för en modern mikroprocessor. I takt med att grafikprocessorn blivit alltmer programmerbar har det blivit möjligt att använda den för beräkningstunga tillämpningar utanför dess normala användningsområde. Inom det här arbetet utreds vilka möjligheter och begränsningar som uppstår vid användandet av grafikprocessorer för generell programmering. Arbetet inriktas främst mot signal- och bildbehandlingstillämpningar men mycket av principerna är tillämpliga även inom andra områden.Ett ramverk för bildbehandling implementeras och några algoritmer inom bildanalys realiseras och utvärderas, bland annat stereoseende och beräkning av optiskt flöde. Resultaten visar på att vissa tillämpningar kan uppvisa en avsevärd prestandaökning i en grafikprocessor jämfört med i en mikroprocessor men att andra tillämpningar kan vara ineffektiva eller mycket svåra att implementera..

Energianvändning på Volvo Lastvagnar Tuve

Volvo Trucks is the second largest manufacturer of heavy trucks, with factories in several countries and with around 21 000 employees. At the plant in Tuve, trucks have been built since 1982 and the activity mainly consists of producing side members and to assemble and packing kits of trucks. In 2005, the factory in Tuve launched the ambition to be the first carbon dioxide neutral vehicle factory in the world. This will be implemented by streamlining and investing in renewable energy. The aim of this degree thesis is to map the usage of energy within production, and also to prepare a method to measure key figures (use of energy per produced unit).

Kartläggning av energianvändning under byggfasen vid nyproduktion av flerbostadshus

The energy consumption in the sectors of residential and public buildings is 40 % of the total energy consumption in Sweden. The main part, 85 %, of the energy use in these sectors is for operation of the buildings. The rest is used in the building process. When energy-efficiency measures are taken the energy use during the operation time decreases and the fraction of energy consumption during the building time increases. This project is carried out in cooperation with JM AB and concerns the energy use during the building time of production of blocks of flats at the building site.The main part of the electricity that is used during the production of apartment buildings goes into the heating of portacabins and illumination of the building during the construction phase.

Modellering av rotationssystem

This master thesis was conducted during the spring of 2014 at Atlas Copco Rock Drills AB in Örebro. The purpose of the thesis was to develop a simulation model of the rotation system for a hydraulic rock drill. In the future, the model will be used to investigate the phenomena called ?jerky rotation?. In order to validate the simulation model a test bench was designed and tests were made.

En studie av kassaflödesanalysens upprättande på Hilton Food Group , Willys AB , Bostads AB Mimer och Eskilstuna kommun.

Bakgrund: Investeringen kännetecknas av att någon, företag eller privatperson, avsäger sig möjlighet till konsumtion idag för ökad konsumtion i framtiden. Den är en faktor som kan öka företagets värde och det är därför viktigt att rätt investering väljs. Investeringskalkyleringen ger företaget värdefull information om en investering. De vanligaste kalkylmetoderna är NPV, IRR, payback och diskonterad payback. Payback är en särskilt intressant metod av två anledningar.

Solenergisystem i Hammarby Sjöstad

Problems with the current energy system, which partially relies on non-renewable fuels, are increasingly recognized. Emissions of greenhouse gases from fossil fuels may speed up global warming, which in turn leads to a number of negative consequences. Nuclear energy is risky and relies on consumption of a scarce resource. This leads to a demand of renewable energy that is also economically feasible. One possible renewable source of energy is solar energy.

Fönsterutredning för radhusområdet Skeppsvägen

Mitt examensarbete innefattar en fönsterutredning för radhusområdet Skeppsvägen i Bålsta. Fastighetsägare är Håbohus AB och examensarbetet har skrivits för Skanska Sverige AB. Arbetet har skrivits på plats i Bålsta där Skanska Direkt AB har eget kontor och erhåller idag totalentreprenaden för renovering av Skeppsvägen. Arbetets syfte är att klart och tydligt redovisa eventuell effekt och energibesparing vid byte av befintliga fönster och altandörrar.Undersökning av fönster och altandörrar har gjorts okulärt, med värmekamera och med fuktkvotsmätare. Vid den okulära besiktningen noterades färgsläpp på fönster.

Fluid Simulation for Visual Effects

This thesis describes a system for dealing with free surface fluid simulations, and the components needed in order to construct such a system. It builds upon recent research, but in a computer graphics context the amount of available literature is limited and difficult to implement. Because of this, the text aims at providing a solid foundation of the mathematics needed, at explaining in greater detail the steps needed to solve the problem, and lastly at improving some aspects of the animation process as it has been described in earlier works. The aim of the system itself is to provide visually plausible renditions of animated fluids in three dimensions in a manner that allows it to be usable in a visual effects production context. The novel features described include a generalized interaction layer providing greater control to artists, a new way of dealing with moving objects that interact with the fluid and a method for adding source and drain capabilities..

Termoelektrisk lagring i system med fjärrvärmeproduktion

With increased deployment ofintermittent renewable energy, such aswind and solar power, energy storagebecomes necessary to help reduceproduction peaks. Thermoelectric EnergyStorage is a method still in researchphase, which stores electricity in hotwater at a temperature of 120 ° C. Thisthesis aims to examine whether theThermoelectric Energy Storage would bepossible to integrate into existingpower generation such as a combined heatand power plant, and how the technologypotentially could function in theelectricity market. ThermoelectricEnergy Storage consists of a chargingprocess and a discharging process, bothoperating by the working fluid CO2. Toincrease the efficiency of theThermoelectric Energy Storage, wasteheat from the district heating networkis integrated.A model of the Thermoelectric EnergyStorage has been developed and it wascalculated by thermodynamic propertiesof the working fluid, CO2, in thevarious process steps.

Uppvärmning med spannmål och trädbränslen :

This examination work brings up opportunities to invest in a construction for heating with grain or pellets on farm level. As example we have chosen Fröberga Gård which is a farm located in Östergötland outside of Söderköping. The farm`s residential buildings is to day heated with oil and electricity. The result of our investigation shows that heating with grain is the best alternative, partly because of economical issues but also because you can grow the grain on your own farm and by that you can get better economy in your seed cultivation. To grow 16 tonne of grain as is needed demand gives a insignificant increase of work. Further an advantage is that no investment in machines is needed because all the machines witch is needed already is in use on the farm. In a situation where a new investment is needed as in the case we studied, is it often profitable to invest in a integrated furnace. Because all the components are well adapted to each other, and because that gives a high efficiency. If you already own a well working furnace is it often most profitable to connect a burner to it. It is important to know that heating with grain need more work than heating with pellets, because the high contents of ash in grain. Even if you choose pellets instead of grain the calculation shows good results. Because peat is an excellent but fairly untested raw material for pelletsproduction we have chosen to watch little more on its quality and conductions. We discovered that peat has a high heating value which makes it possible to raise the heat value in pellets through mix up peat and wood. Or you can make pellets with only peat and get a pellet with high heating value. Even the calculation with peatheating shows good results..

Luftfuktighetens påverkan på konstruktion och klimat i en berghangar

Aeroseum is an aviation museum located in an old military underground hangar. The ventilation system in the hangar is designed for the military purpose of the hangar. This design includes a solution with air flowing through the space between the construction of the hangar and the rock surface. The solution is intended to avoid a buildup of inflammable gases. This design leads too high humidity levels in the hangar.

Elevers syn på motivation i matematikundervisningen : En undersökning gjord med elever i årskurs 3 och årskurs 6

Syftet med detta examensarbete är att få en bild av hur eleverna ser på motivationen under matematiklektionerna, samt om eleverna upplever någon skillnad mellan låg- och mellanstadiet i matematikundervisningen vad gäller motivationen.I bakgrunden presenteras motivation utifrån några olika definitioner. Olika begrepp inom motivation så som inre och yttre motivation, prestationsmotivation och flow beskrivs samt att tre olika teorier belyses.Studien är gjord i Kalmar och sammanlagt har 23 elever intervjuats, 11 elever från årskurs 3 och 12 elever från årskurs 6.Resultatet visar på att det är olika faktorer som inverkar på elevernas motivation men att det framförallt är elevernas inre motivation som påverkar. För att eleverna ska uppleva matematiken mer motiverande krävs dock att det används mer praktiska uppgifter så som spel och lekar i undervisningen. De elever som medverkade i undersökningen upplevde att matematiken är mer motiverande på mellanstadiet då uppgifterna är mer utmanande och eleverna ser en användning av matematiken i det vardagliga livet..

<- Föregående sida 54 Nästa sida ->