En sjuksköterskas vardag består av att möta och lindra lidande hos så väl patienter som närstående. För de patienter som blir aktuella för organdonation spelar de närstående stor roll då det i vissa fall blir deras uppgift att tolka den avlidnes vilja. Efterfrågan på organ är idag större än tillgången och av 219 möjliga avlidna donatorer i Sverige år 2011 valde 143 att donera sina organ efter egen eller närståendes vilja. Lidande, kris och sorg är personliga upplevelser som bland annat kan utlösas av en nära anhörigs död. Vanliga reaktioner på detta är chock och irrationellt tänkande.

The purpose of this paper is to understand the climate of the street and how it can be modified to better meet the needs of the street and the user groups. At the same time the conditions of the street and its surroundings also has to be taken into account. To accomplish this it is necessary to have a broad knowledge of the climate conditions in the city. Therefore an overview of the climate elements and how these are modified in the built-up areas are given. The part of the paper which deals with the city climate has a global approach to be able to give an as complete picture as possible.

This masters thesis concerns a modeling project performed at Volvo Technology in Gothenburg, Sweden. The main purpose of the project has been to develop a physical model of the climate in construction vehicles that later on can be used in the development of an electronic climate controller. The focus of the work has been on one type of wheel loader and one type of excavator. The temperature inside the compartment has been set equal to the notion climate. With physical theories about air flow and heat transfer in respect, relations between the components in the climate unit and the compartment has been calculated.

This paper analyzes the Swedish labor market during the interwar and early postwar period within the framework of modern labor market theory. The development of unemployment during this period - according to the commonly cited source of labor union reports - represents a conundrum for research. The unemployment rate rose after the initial diverse shock of 1921 and stayed at a permanently higher level for the rest of the interwar period. This development was reversed after World War Two when the unemployment rate decreased and stayed permanently low for the rest of the postwar period until the oil price chock of the 1970s.In a first step the available sources of unemployment statistics is investigated and compared. The general conclusion is that the labor union reports overestimate the level of economy wide unemployment while being a reasonably good indicator of movements in the rate.

Arbetet beskriver en analys av innehållet av membranbundna och periplasmiska c-cytokromer hos perkloratodlade GR-1 och jämförelser med c-cytokrominnehållet hos Ideonella dechloratans och andra kända c-cytokromer, samt med genomet för Dechloromonas aromatica. Den jämförande studien av c-cytokromer gjordes med syftet att undersöka en hypotes om att bakterierna använder olika vägar för elektronöverföring till det periplasmiska enzymet (per)kloratreduktas. Cellmembran från GR-1 renframställdes genom ultracentrifugering och periplasma preparerades fram med hjälp av osmotisk chock. Fraktionerna analyserades sedan med SDS-PAGE och peptider med kovalent bundet hem (c-cytokromer) detekterades med hjälp av en specifik färgreaktion. Även Touchdown PCR med degenererade primrar genomfördes på isolerat DNA från GR-1 i ett försök att finna en gen kodande för ett NapC/NirT-liknande protein.

Bakgrund. Ett stort antal personer drabbas varje år av cancer. Det finns riktlinjer för hur besked om cancer ges, dock saknas empirisk evidens kring patienters behov. Cancerbeskedet kan komma som en chock och skapa en krisreaktion hos patienten då livsvärlden förändras och ett lidande uppstår. Lidandet beskrivs som en ofrånkomlig del i livet, dock finns det onödigt lidande, i form av vårdlidande, som bör undvikas.

This thesis examines the environmental benefits resulting from the choice of environmental certification scheme, with focus on energy. This was carried out by studying the measures that were implemented as a result of the certification of Sweco's three largest office buildings in Stockholm, Gothenburg and Malmö. The office property in Stockholm has been certified with the Swedish Environmental Building, Gothenburg with the British BREEAM and Malmö with the U.S system LEED.The results from the study indicate that an environmental certification can reduce the energy consumption by up to 59 percent and the water consumption by 20 to 66 percent. However; the interviews, literature study and simulations in MATLAB indicate that the size and scope of these environmental benefits depend on several identified factors: the type of building and its conditions, system selection, grade level, the choice of indicators, the ambition of those involved and when in time the certification process begins. The comparison between Environmental Building, LEED and BREEAM showed that Environmental Building for the office property in Stockholm gave the largest environmental benefit in terms of reduced energy consumption thanks to several large measures.

As for today, a large quantity of protein feeds is imported from other countries to be used in the Swedish dairy production. The main import is soya from Brazil. The soya-production in Brazil results in negative consequences for the natural environment in the area, and the long transport of the feeds requires a lot of energy. The organic dairy production in Sweden is, with the highest probability going to be forced to use 100 % organic feed to the cows in the year 2005, due to new EU-rules. These are some of the causes why there are reasons to look closer at the possibilities to feed Swedish cows with only Swedish feeds. In this study, I have looked at the KRAV-rules for organic feeding, where the goal is feeding with only KRAV-approved feeds.

This thesis consider alternatives for heating and cooling planned office buildings at Arlanda airport. The thesis is divided into three parts where the third part is a shorter synthesis of the two first. In the first part the energy demands of the buildings are modelled in a computer program. Two different building models are created, one more conventional and one with good energy properties. The results shows that with proper construction and ventilation systems etc.

Scana-Booforge is a Swedish company which specialize in heat treatment of various metal. The treatments take place in quenching ovens, where fans are used to circulate the hot air. The fans used today do not have a satisfactory lifespan. This thesis aims to develop a new design of the fans for the quenching ovens, and the goal is that the new fans will bring cost savings for Scana-Booforge.The design development process started with mapping out the environment in which the fans operate, and with analysis of the existing fan structure and damages, in order to establish the cause of failure and of short durability. The performance of the fan were also established at this stage.

Storage of biomass is associated with problems like heat development, biomasslosses, and reduction of the fuel quality. Certain processes such as biological- andchemical degradation are responsible for these storage problems. This master?sthesis was carried out at Vattenfall Research and Development AB and is alignedtowards quantifying the biomass losses from short-term storage (1-2 months) ofbark and recovered wood. The biomass was stored in outdoor piles during differentseasons, campaign 1 (summer) and campaign 2 (autumn).

This report is an outcome of a master degree project at Linköpings University in co-operation with Micronic Laser Systems AB. The purpose with this master degree project was to investigate how to implement a receiver in a data transfer system. The system consists of several data channels, where every channel consists of three parts: driver, transmission lines and receiver. The driver send low amplitude differential signals via the transmission lines to the receiver that amplifies and converts it to a single-ended signal. The receiver has to be fast and be able to feed an output signal with high voltage swing.

AbstractThe Energy Declaration is a law that will come into effect October 1: Th 2006. This report has Värnamo municipality as principal and shall clarify what the estate owner in general and Värnamo municipality in particular need to know about this law. Another part that is going to be dealt with is how large the future need for energy experts in this field will be, and which competence that will be demanded for them.The work will in general deal with simplified energy declarations for apartment houses and public buildings, since these buildings are the first to be involved with energy declarations.The energy declaration will consist of a number of important components.? Energy power i.e. how much energy the building consume? If the ventilation control is done? If the radon measurement is carried out? Recommendations of measures to improve the energy power? Reference value to compare the buildings energy power againstAccording to the law the declaration shall been made by an independent expert, which will need certain information for this.

AbstractIn urban societies people spend more and more time indoors, which put great demands on the indoor environment. If the ventilation is to manage the removal of unwanted substances in the indoor air, a good mixing of the air is required. The question arises that, whether the buoyancy forces will counteract a good mixing of the indoor air or not?This report aims to clear up the difficulties whether you need to consider the buoyancy forces or not, when adjusting a ventilation unit. For studying the indoor mixing of the air a two dimensional model is constructed in COMSOL Multiphysics.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area.