Voltage sag indices are a way of quantifying the performance of the power supply, as far as voltage sags are concerned. Indices can be defined for individual events, for individual sites, and for a whole system. A standard method for single-event methods is part of IEC standard 61000-4-30.This thesis emphasizes the importance of voltage sag indices and different methods for calculating three-phase voltage sag characteristics. Three-phase events measured in a medium network voltage over period of one month were analyzed, results examined and statistically evaluated. An algorithm for calculating voltage sag characteristics and indices was created in Matlab.

Voltage sag indices are a way of quantifying the performance of the power supply, as far as voltage sags are concerned. Indices can be defined for individual events, for individual sites, and for a whole system. A standard method for single-event methods is part of IEC standard 61000-4-30.This thesis emphasizes the importance of voltage sag indices and different methods for calculating three-phase voltage sag characteristics. Three-phase events measured in a medium network voltage over period of one month were analyzed, results examined and statistically evaluated. An algorithm for calculating voltage sag characteristics and indices was created in Matlab.

This thesis aims at examining to what extent a few, algorithmically very easily extractable document features can be used to classify electronic documents according to genre. A set of experiments is therefore carried out, using only 11 such simple features in an attempt to classify 84 documents belonging to electronic academic journals into three manually identified genres: table of contents, article, and review. The 11 features are also divided into three sets, containing metrics of words and sentences; punctuation marks; and URL links, respectively. The performance when using these sets of features is then measured with regard to classification accuracy, using a k-NN classifier, four different values of k (1, 3, 5, 7), and both leave-one-out and 10-fold cross-validation. Best results are achieved when using all three feature sets (i.e.

?I have a dream that one day on the red hills of Georgia, the sons of former slaves and the sons of former slave owners will be able to sit down together at the table of brotherhood.? Martin Luther Kings jrs. starka stämma ekade ut ur högtalarsystemet och de 250 000 medborgarrättsaktivisterna som var samlade vid George Washington monumentet i USA:s huvudstad  instämde i ett jublande bifall. Året var 1963 och Martin Luther King jr., hade i nio år varit känd som den amerikanska medborgarrättsrörelsens främste talesman, när han i sitt tal till det amerikanska folket yttrade sin vision för det amerikanska samhällets framtid.     Denna uppsats beskriver det afro-amerikanskafolkets historia, från slaveriets bojor i de Nordamerikanska kolonierna i slutet av 1600-talet, till kampen för fullständiga medborgerliga rättigheter i 1950- och 60-talets USA.

Voltage sag indices are a way of quantifying the performance of the power supply, as far as voltage sags are concerned. Indices can be defined for individual events, for individual sites, and for a whole system. A standard method for single-event methods is part of IEC standard 61000-4-30.This thesis emphasizes the importance of voltage sag indices and different methods for calculating three-phase voltage sag characteristics. Three-phase events measured in a medium network voltage over period of one month were analyzed, results examined and statistically evaluated. An algorithm for calculating voltage sag characteristics and indices was created in Matlab.

This thesis studies if public libraries in Sweden have taken part ofinformation regarding the Swedish government policy that publicareas are to be made accessible by 2010. Also studied is thesignificance of information and resources on the execution ofaccessibility adaptations at public libraries.The analysis uses Lennart Lundquist?s theory of implementation ofpublic policies, that the person executing the policy needs tounderstand, be able to and want to in order for the policy to besuccessfully executed. The study was carried out through a surveyand the thesis focuses on the factors of understanding and beingable to.The survey was sent by email to all 290 municipal libraries inSweden with an answering frequency of 65%. The results arepresented in table format with explanations.The thesis finds that a clear majority of respondents have hadaccess to information about accessibility adaptations, but thatmuch fewer consider the information clear enough.

With increased need for flexibility in timber deliveries, forest roads become an important factor. The disintegration of roads during the spring season can be avoided if it is possible to rule cutting areas to stands with good carrying capacity along roads with good carrying capacity. The goal with this work was to create a method to find the stands with high carrying capacity located near roads with high carrying capacity, and select them into a collection file. The method was based on Esri ArcGIS 9 and the tables that follow within that program. The method resulted in four different themes: 1. Collections with GYL 100 that cross the bufferzon for 0, 1, 2 and 3 class roads. Result 36 collections. 2. Collections with GYL 100 and 200 that cross the bufferzon for 0, 1, 2 and 3 class roads.

This thesis work was made to optimize the writing of the construction specificationsat FKA. These construction specifications are created before each plant modificationsthat is started because requirements from the Swedish radiation safety authority(SSM) and internally on Forsmarks nuclear group as constructions / implementationdocumentationThe study was done through seven interviews of two people at three different groupsinvolved in the construction specification and an interview from the group accreditedverification. The four selected groups were selected through an extensive analyticalwork resulted in an elimination matrix where these four groups was considered to bemost involved with the construction specification.The questions asked to these individuals were based on the instructions and sampletext that are described in the construction specification. To ensure the quality of thethesis were to limit itself to the chapters that were considered most relevant toimprove. The analysis revealed a number of points that should be improved, partlyinto the routines when writing the construction specification and when ether sampletext or suggestions should be changed and complemented.

This degree project has been performed with Mega Teknik AB in Landskrona. The project has resulted in a workplace for the cable installers of Mega Teknik. The workplace contains a workbench and a cart.The first stage in this project was to make an analysis of the current workplace to identify the needs the installers had.The different principle construction proposals of how the workbench would look like and which functions it would have was made during brainstorming, in groups and alone. These proposals were compared against each other using a functional analysis that has been put up to get the principle construction that fulfilled most points in this analysis.The proposal chose for further work was a cart and a bench with a module intends, the table got a formulation that creates a better reach for the installers.This proposal was generated in Catia V5 to get a better overview of the suggested proposal.During the primary structure phase drawings over all the products were made and the components were chosen. Calculations were made and the product got the dimension required.

Viral marketing is a marketing tool that is becoming more common in the marketing industry. As people spend more time on the internet via their smartphones, tablets and computers marketers try to find new ways to reach out and connect with consumers. Succeeding with a viral spread is not easy; it's several factors that are important. Viral marketing encourages consumers to recommend and talk about product-related information with each other. So, what should a viral campaign or message contain in order to create this interest among us consumers? There are few empirical studies done in this subject which makes this kind of uncharted territory.

Voltage sag indices are a way of quantifying the performance of the power supply, as far as voltage sags are concerned. Indices can be defined for individual events, for individual sites, and for a whole system. A standard method for single-event methods is part of IEC standard 61000-4-30.This thesis emphasizes the importance of voltage sag indices and different methods for calculating three-phase voltage sag characteristics. Three-phase events measured in a medium network voltage over period of one month were analyzed, results examined and statistically evaluated. An algorithm for calculating voltage sag characteristics and indices was created in Matlab.

The decomposition of organic carbon in drained peat soils is a major source of carbon di-oxide in Sweden. A big part of these drained peat soils are used in agriculture and it is a big challenge to slow down their decomposition. It has earlier been thought that less tilling and higher water table levels would decrease the activity of soil microbes and thereby the decomposition, but recent experiments has showed that this has little or no effect. In this bachelor thesis a field experiment was made on drained peat soil with ley, outside Björklinge, Uppsala municipality, Sweden. The experiment was carried out in May 2011. The objective was to develop a method to examine how the net exchange of carbon diox-ide from plant covered peat soil is affected by temperature and photosynthetically active radiation (PAR).

This essay is about power, democracy, solidarity and equality in preschool. I examine three different situations to determine if I could have acted more sensibly in my interactions with the children. I portray: a ?children?s choice meeting? where children select an activity, a so-called emotional gathering and a dialogue at the lunch table about a popular movie that we plan to watch together afterwards. The purpose of this essay is to examine which norms and values form the basis of my actions, and if so, how these lead me to use my power to shape the children.I have chosen to use hermeneutic and norm-critical perspectives where I investigate and examine my norms and values and how I react and act, both consciously and unconsciously.

Vattenfall district Heating power plant in Uppsala produces district cooling with absorption heat pumps which leads to a large amount of waste heat that has to be cooled with evaporative cooling towers. The Environmental Court has ordered Vattenfall to survey the possibilities to recover the heat, which is the focus of this thesis.The study begins with an overview of the system, and conditions and limitations for waste heat recovery is examined. In the next step alternatives to recycle the heat is evaluated, either by direct recovering or by upgrading.First, the technical possibility of each alternative is discussed, and then the operation time and the amount of recovered heat is calculated. Those alternatives which are possible are brought further to an economic analysis.The cost of investment for each alternative constitutes the basis for a present value analysis. The results are put together in a table where the total amount of recovered heat is compared with the present value for the different alternatives.

This thesis was performed at Vendig AB which is a company that develops and sells products such as belt scrapers for conveyor. The thesis is divided into two parts, one part where it´s investigated which tension force is required to tighten Vendig AB´s scraper Hampus against the belt in a correct way. The second part is called mechanical design and here a new and more compact tension device is developed.Field studies has been conducted at a couple of Vendig AB´s costumers to get a knowledge base about how Vendig AB´s products are used, how they function and the environment they operate in. During one of the field studies the force between the scraper and the belt was measured. The result from the measurements, together with a report from LKAB [1], were evaluated and summarized in a table.