The market for biofuels from the forests have had a positive development and the job initiators for this master´s thesis wanted to examine the profitability of a method for Harvesting forest fuel, which was unfamiliar to them. The method was the ?long tree tops-method?, here called the LT-method. The LT-method is characterised by the fact that timber is harvested as the only roundwood assortment while the rest of the stem, which in other cases would become pulpwood, is harvested as forest fuel together with the logging residues. The method is based on the assumption that advantages in handling of the forest fuel assortment such as increased load weights for forest hauling and truck transportation, should compensate for the lower price for pulpwood when sold as forest fuel. The aim of the study was to compare the profitability of the LT-method with the GROT-method (harvest of timber, pulpwood and logging residues) and conventional logging without any harvest of forest fuel, and aslo to try to identify factors affecting the profitability of the different methods.

AbstractSurface-water includes different kinds of pollutants from traffic and roads. To prevent these pollutants to reach nearby lakes one can construct surface-water ponds on locations with heavy traffic. At Bergviks shopping centre in Karlstad, two ponds, one smaller and one bigger has been constructed in order to decrease the pollutant pressure from the receiving waters of Kattfjorden. Several heavy metals are essential for plants and animals in low concentration but when they occur in higher concentrations, they become toxic to the organism. The larger pond at Bergviks shopping centre has a sedimentation function so the heavy metals sink to the bottom thereby not releasing directly in to Kattfjorden.

This report is focused on marketing opportunities for small-scale mango farmers in the Nyanza Province in Kenya. Kenya is a large horticultural producer in the world. Horticulture is an important income for a large share of the rural population in Kenya but profitability is low due to inefficiencies in marketing systems and poor infrastructure. The conditions for growing mango in the Nyanza Province are very beneficial and there are two Harvesting seasons. Mango offers good income opportunities for small-scale farmers in the Nyanza Province.The aim of this study is to identify marketing conditions that will enable prospering business for small-scale mango farmers in the Nyanza Province, Kenya.

Evaluation of machinery costs is necessary for selecting appropriate farm machinery. Timeliness cost due to untimely operations is an important component of machinery costs. Timeliness costs can be high for crop sprayers, since pesticide application must be carried out within a short time interval. This Master thesis investigated the timeliness cost and the probability of a suitable workday for spraying. Timeliness factors were estimated for four different crops (oats, spring wheat, winter wheat and barley) using historical weed trial data.

Forestry supply chains are a significant part of the Swedish economy. These supply chains are highly susceptible to storms damage. In late 2013 Sweden was hit by multiple storms. This leads to the possibility to research how supply chains react to the shocks that storms cause. The aim of this thesis is to research the costs that storms increase, the actions that are taken within the forestry supply chain, as well as possible benefactors from storms. This thesis bases on previous work on supply chain mapping and cost theories.

The aim with this thesis is to make a comparison between forcing tulips in a hydroponic system and the forcing off tulips that have been planted in soil. The results are mostly based on interviews with six Dutch and one Swedish tulip forcer and the managing director at the Horticultural Research Centre, Proeftuin Zwaagdijke, in the Netherlands. There are benefits and disadvantages with both methods. Tulip bulbs planted in soil seem to get a brighter colour after forcing, compared with those forced ?in water?.

At seed-growing the aim is to produce a commodity with high germination capacity, good soundness and purity, and also slight admixture of seeds from other species. The capacity of germination and the vigour of the seeds may become impaired in consequence of mechanical damage, infection of diseases, growth of mould, attacks of vermin, high drying temperature, secret germination, sprouting in the ears etc. The germ belongs to the outer and most unprotected parts of the seed, and consequently this is much exposed. Even quite sound seeds can instantaneously have low capability of germination. It can be due to the fact that the seeds are in rest of germination, i.e.

The conditions for a good silage process start with good wheather and choice of crop, then choice of Harvesting machinery. The shorter and more mechanically treated crop, the better quality of the forage. (Pauly 1994). This study has examined the variations in chopping length depending on harvest method. Precision choppers works with a rotating chopping cylinder, where the crop is cut into pieces.

The most predominant method for forest Harvesting in Sweden is the cut-to-length method based on two-machines, a harvester that fells trees and cut them in a predefined length, and a forwarder which transports logs to a landing area for further transport to a processing facility. New machine solutions have to be much gentler to the ground than today?s machines. To be able to develop a forestry machine that preserves the terrain requires a proper understanding of the interaction between tire and soil.The goal of the project is to contribute to the existing knowledge of forest machine tire-soil interaction and to develop a tire-soil model that enables dynamic simulations of forest machines operating in rough terrain. The modeling has especially been focused on the interaction between tires and soft ground.A comparison of theoretical data of different WES-based terrain interaction models and a comparison test data from a full scale field test is presented.

Som följd av den pågående urbaniseringen har de naturliga förutsättningarna för regn och smältvattnet att infiltrera i marken och återgå till sitt kretslopp på naturlig väg försvunnit i städerna. I Stockholm leds ungefär hälften av dagvattnet via VA-nätet direkt och orenat till reningsverken. Dagvattenflödet varierar kraftigt vilket orsakar toppar som överbelastar VAnätet  och är svåra för reningsverken att hantera. Istället för att ledas ut i VA-nätet ska dagvatten strävas efter att hanteras lokalt. Arbetet lägger fokus på dagvattenhanteringen för takparken på ett nybyggnadsprojekt i Stockholm, projektet PARK 1.

Using the Introductory Carbon Balance Model, ICBM, five different crop rotations with rye 1. Rye-Ley-Ley-Rye-Beans-Rye 2. Rye-Rye-Rapeseed-Rapeseed 3. Rye-Ley-Ley-Rye-Potatoes-Rye 4. Rye-Rye-Potatoes-Wheat 5. Rye-Rye-Potatoes-Beans-Wheat-Rye-Potatoes-Rapeseed were tested theoretically in four different cultivation scenarios ? Straw left on the field, biogas digestate added as fertilizer. Labelled ?+straw+BD?. ? Straw left on the field, only synthetic fertilizer. Labelled ?+straw-BD?. ? Straw harvested, biogas digestate added as fertilizer.

The efficiency of the harvesters work is more often reviewed, than the work of the forwarders. In a local Stora Enso office the differences between the harvesters reported volume of timber, and the actual volume delivered to the industry had been noticed. Therefore, the decision was made to do a review on the forwarders work. The review was conducted together with a worker from Vmf Qbera, who is working daily with wood measurement, in order to get a valid evaluation of the logs. Eight sites were included in the survey, and on each site 50 logs were marked. Approximately one third of the marked logs were pulpwood, and the remaining logs marked were timber.

Hemp is an annual energy crop that fits very well in Swedish crop rotations. It is an interesting crop with many benefits, for example its ability to establish a large quantity of biomass in one year. Hemp is easy to grow and out-competes unwanted weeds through its aggressive growth pattern without the need for pesticides. Interest in growing hemp and other energy crops is currently decreasing, apparently because of high grain prices. These high prices give a higher net profit that we believe could partly cover the cost of hemp cultivation, while the hemp in turn would improve the crop rotation and thus repay its debts in the form of increased yields of other crops. The great disadvantage of hemp is the lack of knowledge about spring harvest of the crop.

BIOGAS POTENTIAL IN GRASSES FROM WETLANDSMarvin MartinsThe purpose of this study has been to survey wetlands that are suitable for mowing and to analyze the biogas potential in the harvested grasses. A preformed investigation showed that there are suitable wetlands, which can be harvestable, namely those mowed formerly in traditional haymaking. The practice of traditional haymaking is dying out in Sweden today but there are several good reasons why it should to be reconsidered. Nature- and cultural values are obvious, also the unutilized energy in the grass.The suitable types of wetland that were specifically studied were the productive wetlands; meadow marshes and wet meadows. These wetlands are represented in the Swedish meadow- and pasture inventory database; (TUVA) and the Swedish national wetland inventory (VMI).

Findus Sverige AB, referred to asFindus from now on, harvests peas during a period ofaround 50 days during the summer. The harvest generates about 30 000 tonnes of peas which gives around 40 000 pallets to distribute to the warehouses which Findus uses for final storage. Three hours after the peas are picked in the fields, they have to be frozen to keep their good taste and quality. Because of this the pallets are marked with a preliminary label with quality classification of the content. The Findus quality department then has one day to determine the correct quality of each pallet.