People have utilised and influenced the boreal forest for many centuries. Prior to the industrial revolution during the 19th century, however, human use primarily only had a low impact on the forest. When the timberfrontier swept over the country, the Swedish forests came to change for ever. The study site for this thesis is situated in the northern part of the county of Västerbotten, Sweden, and has previously been a National forest. Today the area is an ecopark and the land is owned by the forest company Sveaskog.

The information flow is a very important process in an organization. It affects in a decisive manner the effectiveness of a task. It also has a major impact on the quality of the product or service for which the organization delivers to its customers. Lack of information may cause that important aspects are not given the required attention or even forgotten and can in turn lead to criticism from certification officials and lower customer satisfaction. The purpose of this study was to study how the information flow in Norrskog?s field organization is handled and how this affected the quality of the work performed and the feedback given to the contractors, The study is based on qualitative interviews with contractors, production inspectors and forest inspectors on all Norrskogs districts.

The movement of the allotment gardens reached Sweden in the beginning of the last century. The allotment gardens quickly spread among the big towns from Malmö in the south and to the far north of the country. Today, there are about 42 000 owners of allotment gardens in Sweden. This work will show the differencies and similarities comparing the original ideas of allotment gardens with how they are used today. The specific questions were; what are the reasons to acquire an allotment garden; is it used for raising vegetables and fruit or only for growing flowers; is what is cultivated there also gathered and used or is it cultivated only for the pleasure of gardening; and finally how the owners of the allotment gardens spend their time there ? by cultivating the land or by recreational activities. Literature studies were made as well as an inquiry at one allotment garden area i Lund. The ideas of the original allotment gardens in the beginning of the 20th century were as much based on the need of getting out of the aparment to a healthy environment, as cultivating vegetables for economical reasons.

This project aims to investigate whether algae can be used for biodiesel production in Italy. Algaes are a good option since they are fast growing and do not occupy arable land. The aspects that have been considered are growing, Harvesting, which algae strain that is most suitable, extraction of oil, the production of biodiesel and where in Italy this could be possible due to climate. Cost? and energy calculations have been made to investigate if biodiesel produced from algae would be profitable. During the production of biodiesel there are several residues obtained. When the oil has been extracted from the algae, biogas is produced from the residual biomass by anaerobic digestion and then the electricity that can be produced is supplied to the production of biodiesel.

Forestry is an important industry in Sweden, with clear-cut as the most commonly used method for Harvesting. Here the long-term impact of clear-cut on lake water quality (dissolved organic carbon (DOC), nitrogen, phosphorus and pH) has been investigated, based on 23 lakes sampled during autumn. Data for additional 15 lakes sampled for the Swedish monitoring program were also used. Lakes were classified as 5, 25, 40 and 60 year based on data of the forest age in the catchment, gathered from the Swedish national forest inventory. Clear-cut lakes were classified as 5 years (>20% of the catchment clear-cut during the last 10 years).

Bakgrund      Skogsmaskiner har under många år förstört både fornlämningar och gränsmärken. Idén till databasen/tjänsten uppkom av egna erfarenheter vid en förrättning, där flertalet gränsmärken hade blivit överkörda av skogsmaskiner. Syfte              Examensarbetets syfte är att lyfta fram en ny idé för att minska skadorna på fornlämningar och gränsmärken som skogsmaskiner orsakar, samt hur lägesnoggrannheten påverkar den nya tjänstens ändamål.Metod           Examensarbetet består av en litteraturstudie med syfte att besvara och ge en bakgrund till problemställningen. För att undersöka hur vanligt det är att lantmätare/mätingenjörer stöter på att gränsmärken blivit skadade av skogsmaskiner genomfördes en enkätundersökning. För en djupare inblick av lägesnoggrannheten på utrustningen i skogsmaskiner och vilken kvalitet på koordinaterna som krävs för en mer ändamålsenligt tjänst gjordes en intervjustudie.Slutsats         De uppgifter som finns tillängliga idag ska vara användbara när det gäller fornlämningar, för en ändamålsenlig tjänst som ska fungera ute i skogen där lägesnoggrannheten inte alltid är den bästa.

Mechanical Harvesting may result in timber damages leading to reduced saw log quality. The initiator of this study was VIDA ? a privately owned concern operating in the value-adding process industry of forest raw materials. The aim of this study was to examine the type and amount of damages on Alvestakubb caused by the harvester head during the cutting process. The aim was also to compare the damages caused by different types of feed rollers and to evaluate the effects of temperature on damage occurrence.

The cost of forwarding corresponds to about one tenth of the forestry industries raw material cost. This gives a motive to do good follow-ups to get a good overview of the forwarding distance and, thus, enable improvements. Follow-ups are also justified by the possibility to make more accurate calculations of the Harvesting costs, if better estimations of forwarding distance are achieved. Today (2009) Stora Enso has GPS and vehicle-computers in most of their forwarders. These are used mainly for the forwarder to follow the tracks of the harvester and for the planning leader to see how the forwarder has been driving within the stand.

The high level of energy consumption that the industrialised countries have reached and thepollution that this brings has long been a cause for analysis and debate, development and usageof so called renewable energy sources is therefore more important than ever. The energy in theelectromagnetic radiation from the sun is an interesting alternative. One way of Harvesting thisenergy is by using solar cells, devices that generate DC current when exposed to electromagneticradiation.The goal of this master?s thesis was to design a solar powered power supply to Syntronic AB?sMidrange platform. The envisioned application is a stand-alone distributed embedded system,for example a node-based temperature monitoring system.

Stump harvest could be found in the late 1970?s and the early 1980?s. And now when the prices on energy are high it has become an interesting topic again. This work has been conducted within Holmen Skog?s stump harvest testing in Norrköping.

Earlier investigations showed that damages on timber from feeding rolls could be within the lower classes of damage according to VMRs classes. Knowledge about differences in productivity between kind types and aggressive types of feeding rolls is necessary because it should influence the question about damages on timber caused by different feeding rolls. In this study the production and timber damage in a Harvesting head were evaluated at three levels of pressure (8, 10 and 14 MPa) on the feeding rolls, and with three different types of rolls. One type, the rubber cushioned steel plate roller had 10 mm studs and rubber damping, one ?middle? type made of solid steel with 14 mm studs, and one aggressive type, also made of solid steel with 18 mm studs.

The private forest owners play a key role in the supply of round wood to the Swedish forest industry. Today it is a keen competition between forest companies about the wood from private forest owners. In order to get access to the wood from the private forestry you need to be an attractive collaboration partner, who can offer long-term collaboration, service at top-level, and acting for good prices to the forest owners. This work aims at analysing the situation on the market today. It gives Sveaskog purchase department a good view of the forest owners? opinion in general about the existing purchase activities. Forestry service level and timber prices are determining factors for a successful relationship between forest company and forest owner.

Booth for operational planning of Harvesting and for long term planning, data is today collected manually. Intensive objective field inventories are usually too expensive. To enhance optimisation of timber flow from forest to industry Moore efficient methods for measuring tree stems of standing trees are needed. The performance of terrestrial laser scanners have improved and these could possibly be used within forestry in the future. The objective of this study was to validate how a terrestrial laser scanner could be used to measure stem diameter, and to test how the errors depend on distance from the scanner and tree species. Two plots (one pine and one spruce) were used for this study.

The interest in Harvesting wood fuel in conflict stands has grown in recent years as a consequence of the increased demand for biofuel. Conflict stands are young forests that have not been cleaned and have a large number of stems ha-1with a great height and diameter distribution. This means that traditional field measurements in conflict stands are difficult and very time consuming. Therefore, the forestry sector is in need of new, more efficient inventory methods. In this study, the Lidar data from Lantmäteriet?s (the Swedish mapping, cadastral and land registration authorities) new national height model was used in combination with plots from the Swedish national forest inventory from 2009 to create functions for; height, volume, diameter and number of stems.

With background in the rapidly growing need to find solutions for sustainable energy production and the increasing interest for wind power, this report was written. With take-off point from the wind power plant Big Glenn, which has been built in the harbour of Gothenburg, a model of the adjacent power grid has been created in Simulink/SimPowerSystems. Parameters for the power grid and its components has been provided by Göteborg Energi Nät, that has also been the supplier of measurement data of produced power, the power need from loads in the vicinity, voltage levels, current values and also the variation of power factor at the wind power plant.The SimPowerSystems model has been used to perform simulations of power flow in the grid. These simulated values have then been compared to the measured values to verify the functionality of the model. Further, the model has been used to perform simulations of a grid fault, which causes a voltage drop.