One of the most important components of a harvester is the crane. Most harvester cranes are only possible to pivot (or horizontally rotate) at the crane pillar. Cranab in Vindeln, Sweden, has developed a new type of harvester crane which has an extra pivot point on the outer boom. This makes it possible to reach around residual trees, easing thinning work in dense stands. The aim of the study was to analyze if the use of a pivoting outer boom (POB) crane gave an increase in thinning production and if there were any differences in time consumption between the work elements for the POB crane and a conventional crane. A Valmet 911.3 equipped with a POB crane was used in the study.

The background of this study is an article in the hunting magazine ?Svensk Jakt? where Karl Hedin claims that his sawmills has not noticed any significant moose damages in the timber. The purpose with the study is to find out the causes to the moose explosion and what it has led to in today?s forests. A questionnaire has been sent out to sawmills in the region Dalarna with the purpose of finding out if sawmills receive moose-damaged timber and what they think about how they foresee future development. There were two causes of the moose explosion, that had effects on the moose population. The first cause was that the moose hunters wanted to raise the moose population, and by raising the calf shooting and by saving the cows they succeeded. The second cause was changing methods in Swedish forestry.

The starting point must be that as long as no binding agreement between negotiators has been concluded, the negotiators has no obligations towards each other. Swedish Law does, however, recognize that obligations may arise in a pre-contractual phase. Different circumstances may add liability in a pre-contractual phase. This essay is a study about what the presumptions are for the liability in a pre-contractual phase. This essay also deals with what circumstances a party can add when he will claim damages in a pre-contractual phase.

Nowadays the majority of the thinnings made in Swedish forests are done by machines, harvesters and forwarders. The most common model in thinning with a harvester is strip-road operated thinning and stand-operated thinning with one intermediate passage between the strip-roads. This study is a time study with some quality follow ups on a strip-road operated thinning model, a stand-operated thinning model with one intermediate passage between the strip-roads and a stand-operated thinning model with two intermediate passages between the strip-roads. The machines in the study were a small harvester (Forestline MPM C90) and a medium sized forwarder (Timberjack 1110). The study was made in Litsnäset outside the city of Östersund in Sweden and was made during the autumn 2007. In a lodgepole pine stand six study units (0,6 ha) were thinned with the three different models, two study units per model.

Buildings today are built to maintain a healthy indoor environment and an efficient energy usage which is probably why damages caused by dampness has increased since the 1960?s.A study between year 2008 and 2010 showed that 26 percent of the 110 000 examined houses had damages and flaws caused by dampness that could prove to be harmful later on. This means that one out of four bathrooms risk the chance to develop damages by dampness. Approximately 2 percent of the houses had already developed water damages. It is here where the problems appear.

Forestry is increasing on an industrial scale where collection of logging residues takes a greater part. This has resulted in more machinery and heavy machinery driving in the clear felled area, this increases the risk of soil damage that will occur in the form of soil compacting and rutting in the clearings. This affecting on the nature in a negative way and especially in rivers and lakes that are affected by siltation and acidification leading to increased levels of heavy metals and methyl mercury. The purpose of this study was to investigate why there is damage to the ground when working with the slash in forest management from the forest officer point of view. A self-designed questionnaire was used and 45 questionnaires were sent out to various companies all over Sweden.

Hybrid aspen is a crossbreed between European and North American aspen. It is a fast growing tree species that has shown strong growth in the South of Sweden. The follow-ups that have been made on hybrid aspen stands, have mainly been done on plant material in the South of Sweden. In the North of Sweden, only occasional studies have been made, and the knowledge of Northern hybrid aspen stands is, thus, unsatisfactory.In the South of Norrland, land owners have planted hybrid aspen, but what kind of plants it is, and how well these stands have established, is not ascertained, since data has not been compiled on the subject.The objective of this study is to evaluate practical plantations of hybrid aspen in the South of Norrland regarding height growth, survival and damages. The ambition is to increase the knowledge about practical plantations regarding height growth, survival and damages, and from the conclusions thereof, give recommendations for future establishments of hybrid aspen in the area.For the study, eight hybrid aspen stands in the South of Norrland were localised.

The aim of this study was to quantify the productivity and the costs of different harvesting systems (teams), containing harvesters equipped with accumulating harvester heads and forwarders, in first commercial thinnings were an integrated harvest of pulpwood and energy wood were performed. In the beginning the plan was to study and measure 20 sites before and after harvest. Due to storms during the summer of 2010, complete data could only be obtained from 8 of these 20 sites. Seven of these sites were privately owned and one was owned by UPM, all of the sites had been pre-commercially thinned. The mean stem density before harvest was 2578 stems per ha and the mean stem volume was 0.074 m3solid over bark.On average 1518 stems/ha was harvested.

The aim of the study was to compare productivity in first thinning of birch stands, when either energy- or pulpwood was harvested. The systems total profitability was also compared by including forwarding and chipping costs. A Gremo 950 HPVR harvester was used and the same driver was used under the entire study. During the pulpwood harvest a Logmax 4000b harvester head was used and a feller buncher head made by Silvatec was used during the energy wood harvest. Six study unit pairs were located in a birch dominated stand outside Ängelholm in Skåne.

The purpose of this report is to investigate and compare the difference between stand-thinning machines and strip-road thinning machines, and how they affect the stand on behalf of future growth, theoretical economic result, wind impact, snow pressure and density of stand. The investigation is regarding the first commercial thinning of pine stands, after pre-commercial thinning that was well conducted. The investigation area was located near Katrineholm, Sweden. The measurements that were measured were strength of thinning and amounts of wind throws, snow-breaks and hauling damages. The results that emerged, was that thinning with strip-road machines had a significantly higher strength of thinning over all, as compared with the stand- thinning machines (45 percent versus 30 percent). Comparisons between wind-throws, snow-breaks and hauling damages of the stand could not establish any significant differences between the two methods that were investigated. Conclusions, over all, were that if forest owners want to have more timber volume left for second thinning and final cut of the stand, the forest owners should choose the method with stand-thinning machines. From the point of view of gentle treatment of the stand and ground damages the choice should be the same. However, the method with strip-road thinning machines is the most common and accessible method in Sweden. Most likely it is the most economical way to manage the stand for forest owners in present time. If the method with stand-thinning machines is becoming more common in Sweden, it is suggested for forest owners to consider the stand-thinning method as a candidate for treatment due to economic aspects..

The storm Gudrun January 8-9 2005 felled about 70 millions cubic metres forest in southern Sweden. The majority of the wind damaged forest was spruce (Picea abies). In order to decrease the risk of wind damages in the future other trees species are of interest for forestry in southern Sweden. The purpose of this master thesis was to study if larch were more wind tolerant than spruce. The method was to compare larch, Japanese larch (Larix kaempferi Lamb.), European larch (L.

Stora Enso Skog has a long term contract regarding felling rights and silvicultural activities on forest owned by Bergvik Skog. In the autumn 2006, Bergvik Skog proposed a new thinning program, ?Bergvikgallring?. The new program implied an increased focus on extraction of smaller trees compared to the present thinning program, Stora Enso Skog?s ?Kvalitetsgallring?.

The Swedish Transport Administration manage nearly 4,000 railway bridges in different condition and age around the country. These bridges is in constant need of maintenance and requires continuous inspections. This thesis is designed as a damage investigation on a single-track railway bridge south of Solvarbo in Säter municipality. The railway bridge is in operation and serves over 10,000 trains a year, everything from speed trains to freight trains. The bridge is built as a beam bridge, simply supported over a road.

Sitka spruce (Picea sitchensis (Bong.) Carr) is just like Norway spruce (Picea abies) a species in thegenus picea. The natural range of Sitka spruce is a narrow strip along the west coast of North America. Itis the most coastal of all picea species, and very dependent on the mild and humid climate along thepacific coast.Sitka spruce has been grown a long time in the countries around the North Sea, particularly in GreatBritain where it currently is the most important species in British forestry. Sitka spruce has not beenplanted in Swedish forests to any large extent before the storm Gudrun in 2005. Several studies indicatethat the production of wood biomass is higher for Sitka spruce compared to Norway spruce.

From July 2005 on, the new Swedish Corporate Governance Code will be applied gradually by companies listed on the stock exchange or any authorized financial market in Sweden. The Code has been drawn up in order to clarify and to improve the self-regulation in Swedish companies. The need for codified self-regulation standards has been considered as urgent due to negative trends on the market such as the last few years? corporate scandals in domestic and international trade and industry. The sought-after consequence is to clarify the mission framework for corporate directors.Ch.