The running of gas turbines with low emissions causes high pressure pulsations to arise in the combustion chamber. These pulsations are high amplitude sound vibrations. At some frequencies these are harmful to the gas turbine. Hence these pulsations are monitored to avoid operating conditions where pulsations are specifically harmful. It is necessary to expose the system of known pulsations to verify the functionality of the monitoring process.

In this report a system for Rapid Control Prototyping, RCP, is evaluated through animplementation of the motor control methods Field Oriented Control, FOC, and Space VectorPulse Width Modulation, SVPWM. The evaluation emphasizes on time-consumption andresource utilization on the used hardware and on usability for of software.A new mechatronic laboratory is under development at ABB Corporate Research in Västerås. Itwill be used for both mechanical and motion control design using existing and new hardware.The control structure in a traditional robot system will be interfaced to a rapid prototypingsystem which should allow easy changes to algorithms at different levels in the system.The system designated for this project comes from National Instruments and constitutesLabVIEW Real-time and FPGA module as the software tools. The hardware is a NI Single-Board RIO (Reconfigurable Input Output), sbRIO, development board including a Field-Programmable Gate Array, FPGA, from Xilinx and a microprocessor from FreescaleSemiconductor. Graphical programming is performed in the LabVIEW environment, andthrough Xilinx tools the LabVIEW FPGA code is compiled to VHDL code.A pre-study was carried out to clarify the concept of RCP and investigate different systems forRCP and their traits.

The eld of Brain-computer interfaces (BCI) concerns linking together an external device with the brain of a human or an animal. By doing this the conventional use of a mouse or keyboard can be circumvented, which can greatly benefit people with different types of diseases that cause paralysis or other loss of motor control, such as Amyotrophic lateral sclerosis (ALS). A BCI can also be used for cognitive training of either healthy or mentally impaired subjects to increase cognitive capabilities.In this thesis an implementation of an interface is made against such a device, the Emotiv EPOC Headset. The result is meant to be a stable basis for further study using the device. An in-depth study of the history of EEG and its current use in clinical work and research in the topics of BCI as well as Human-computer interaction (HCI) is presented.

The school is a place of work where teachers, with different tools, are supposed to teach their students for the future. In the study the teachers? opinions will be lifted when it comes to use of computers as a tool to teach the students how to read and write. The interpretation is that the use of computers is reflecting the development of society and the intention is to find out if computers will be used in a didactic purpose in teaching. We focused on getting knowledge about which different opinions there are among teachers in grade 1-3 when it comes to the use of computers as a tool in teaching how to read and write.

Background: Health economic evaluations are becoming an increasingly important means of analysing which care alternative resource utilisation is the most cost effective. It is a new topic in the medical device industry that causes much uncertainty and unstructured use of the actors involved.Study questions: Why is it difficult to develop, implement and disseminate this standardized health economic evaluation models in medical technology? Is there a possibility to standardize health economic evaluations within the medical device industry?Purpose: The purpose of this study is to investigate the standardization issues for health economic evaluations within the medical device industry.Method: A qualitative approach was used in the form of interviews with five actors that are active or have a connection to the medical device industry. The data collection consists of journals, reports, Internet searches and literature among other things.Conclusion: It is possible to standardize, but with certain restrictions such as the county council's budget, influence of industry-specific factors, lack of knowledge and the important interaction between actors..

Virtualization has increasingly been adopted in the last decade and the usages of virtualized environments are going to be an important part of how computers are used in the nearby future. There are a lot of advantages with virtualization and different methods have been developed to make it as efficient as possible.Forsmarks Kraftgrupp were interested in the possibility of taking advantage of virtualization in their testing environment.In this report, hypervisors of type 1 and type 2 and containers have been evaluated to determine which method and what program is preferable on a server cluster of four HP ProLiant DL380 Generation 4. Because of the hardware specifications of the DL380, focus has been on virtualization programs that do not require hardware assisted virtualization.The results show that it is possible to use some of the type 2 hypervisors on the HP ProLiant DL380 Generation 4. The suggested virtualization programs are VMware Workstation or Oracle VirtualBox. .

As new ways of using computers are constantly being developed, other ways of interacting are made possible. One of the most desired types of interaction with computers is a touch-screen where the user can actually organize everything simply by using the fingertips. The purpose of this project is to enhance an existing framework with an application that works with a touch-screen device. The application is to be used as a tool for presentational usage. The result is an application where the user by simple means can use a touch-screen to hold a professional presentation.

This report presents a master thesis project performed at Elekta AB during the fall of 2013 and early 2014. Elekta is a medical technology company and their main product in the Stockholm office is a gamma knife used for radiosurgery. The gamma knife contains a cluster of a dozen motor servos and motors used for adjusting the patient and the radiation sources over a CAN bus. A self-developed hardware-in-loop simulator running on a PC with LabVIEW is currently being used for integration level testing of the control system of the gamma knife. The simulator has some problems with it not running in real-time and having other performance issues.

Business and organizations use computer network in a greater extension than ever before, especially for business-critical use. That increase the demand of security for all systems, both against internal and external threats. The demand on the authentication method used today increases. Today they normally uses password or some kind of smart card. I will performa literature study that will investigate the possibility to increase the security in authentication of users without the use of extra hardware.

This thesis has been adjusted because some parts are classified, some sentences might have been changed. Electric bikes are a convenient mode of transport, a good choice when long distances or tough slopes can be an obstacle.The goal of the project was to create a prototype on a locking mechanism with an inductive charger for electric bikes.The idea behind the project was to develop a user-friendly locking mechanism, where the bikes would be charged inductively when they were locked. To implement the project facts about induction, battery charging and locking devices was needed to be acquired. Circuits for induction charging were created and a lock device was constructed. A microprocessor was used to control the entire system.A prototype was designed with a locking device and an inductive charger fixed in a bike rack.The entire project became very wide which resulted in that not all of the parts of the project could be completed.

The purpose of this work is to design and construct a device able to measure the mechanical attrition of oxygen carrier particles. Those particles are used in chemical looping combustion and in the present situation there is a lack of knowledge in how the attrition process work and in which extension. To find already tested solutions trying to answering this problem a literature study wascarried out and the best solution found was the so called Grace-Davison Jet-Cup method. This method is supposed to emulate the attrition caused by a cyclone separator and its advantages are that it is possible to use small test amounts, 5-10 g, and a thirty minutes long test will be enough to acquire useable results. An device was designed based on the Jet-Cup method with some slight modifications.

In the discourse of teaching it?s often mentioned that the pupil?s previous knowledge and experience plays an important part in the process of learning. For the teachers it?s in general crucial to be familiar with their pupils abilities and skills, talents and shortcomings in order to successfully teach them. Knowledge and an understanding of their pupils, also helps the teacher to organize and customize a successful teaching for each individual.

This master of science thesis is focusing on how the fault handling on hardware connected toa control unit on a Scania vehicle is working. To the hardware counts buttons levers, sensorsand CAN. The work has been concentrated upon how the fault handling is working and if it ispossible to find any new fault modes.The control unit that has been studied is called the Coordinator and is the core in Scanias threenetworks of control units. The Coordinators work is to transmit messages between the threenetworks and to process signals from buttons, levers and sensors. The values is then usedinternally or is sent to other control units on the CAN networks.

The purpose of this work is to design and construct a device able to measure the mechanical attrition of oxygen carrier particles. Those particles are used in chemical looping combustion and in the present situation there is a lack of knowledge in how the attrition process work and in which extension. To find already tested solutions trying to answering this problem a literature study wascarried out and the best solution found was the so called Grace-Davison Jet-Cup method. This method is supposed to emulate the attrition caused by a cyclone separator and its advantages are that it is possible to use small test amounts, 5-10 g, and a thirty minutes long test will be enough to acquire useable results. An device was designed based on the Jet-Cup method with some slight modifications.

This thesis has been adjusted because some parts are classified, some sentences might have been changed. Electric bikes are a convenient mode of transport, a good choice when long distances or tough slopes can be an obstacle.The goal of the project was to create a prototype on a locking mechanism with an inductive charger for electric bikes.The idea behind the project was to develop a user-friendly locking mechanism, where the bikes would be charged inductively when they were locked. To implement the project facts about induction, battery charging and locking devices was needed to be acquired. Circuits for induction charging were created and a lock device was constructed. A microprocessor was used to control the entire system.A prototype was designed with a locking device and an inductive charger fixed in a bike rack.The entire project became very wide which resulted in that not all of the parts of the project could be completed.