This thesis was conducted at Linköping University and Saab Aerostructures DPS, Linköping, and focuses on the possibilities of flexible fixturing in machining applications. The thesis is part of the research project "Koofix", which is collaboration between Linköping University and a number of companies.The thesis is aimed towards small batch production which, for Saab Aerostructures DPS, means diverse part geometry and that parts are manufactured in very small numbers, sometimes just one piece. The result of this is that expensive dedicated fixtures are made for most parts. By introducing more flexible fixturing methods to this kind of production the cost of fixtures and tooling will be reduced, and make the production more efficient.New flexible fixturing methods has been presented and evaluated through the thesis, which has resulted in three different concepts. These concepts have been the result of literature screening and study of current manufacturing process at Saab Aerostructures DPS.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

This thesis has been performed at International Aluminum Casting AB in Eskilstuna,Sweden.International Aluminum Casting is currently working with a number of improvementsin their production in order to achieve their vision of being the leading aluminum foundry in Sweden. As a step in their improvement efforts, focus was directed ondeveloping the company's fixtures for machining.Efforts were focused on two main objectives: to develop a complete proposal on afixture which leads to a more rational use of an assigned part and also form general design advice for development of fixtures in the future.During the work progress, discussions have been made with experts at International Aluminum Casting within the field of fixture design. The objective was to obtain sufficient knowledge about the underlying problems with the current fixture for the part. At this stage of the thesis, a number of essential criteria for fixture design were produced. Information and inspiration were obtained by examining the company?s currently developed fixtures.After gathering the necessary information the process of developing three different fixture concepts started.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

This report is written in cooperation with the Swedish National Road Administration South-Eastern Region in Jönköping. The report is a result of the evaluation to give an answer to the question about how well the function contract has been carried out on the E4 in Östergötlands and Jönköpings län. The evaluation is divided in two hard parameters and one soft.The Swedish National Road Administration is interested in knowing how the standard on the road have been changed during the functions period, which is the reason why the first hard parameter is considering road standard. To evaluate the standard there have been a comparison of values from measures taken every year on the current road stretch. The second hard parameter considers economy.

Municipal Real Estate Companies runs by a political boarder who makes decisions in large investments. In some cases the municipal counter have to take the decisions about big and expensive investments. A successful investment needs to be built on solid ground.Media has lately focused on energy topics as a part of the environmental discussion and the real estate companies tries to use the new technology that the market has provided. Energy investments in new buildings are not longer a small part of the energy saving program. Long-term investment demands needs large knowledge and awareness about the energy topics that have recently grown in the municipal real estate companies.

The main purpose in this degree thesis is to investigate changes in performance when introducing a newly produced Real-Time database in one of CC Systems products, the Diagnostic Runtime Engine, DRE. The thesis is a collaboration between CC Systems, creator of DRE, and Mimer AB, developer of the Real-Time database.The result reveals that the time spent on database access is considerably lesscompared to the originally used database. The research has lead to several additional requirements on the real-time database and these are presented as part of the result in this thesis. The additional features will help making the product more suitable for DRE and similar applications.Additional research is required to be able to recommend the use of this product or not. Primarily the performance in another operating system, Windows CE, but also the introduction of additional features should be investigated.

The thesis investigates how two of the world?s most powerful international actors, the US and the EU want to promote democracy and human rights. The aim is to compare how the US and the EU work in order to support a democratic development in the world. In order to fulfill the purpose of the thesis a qualitative text analysis was used. Since the aim is to compare the US and the EU I believe this method is beneficial.

This thesis was conducted at Linköping University and SAAB Aerostructures, Linköping, and focuses on the automation of flexible fixturing in machining applications. At Linköping University a project called "Koofix" is conducted with support from Strategiska stiftelsen and several manufacturing industries including SAAB Aerostructures. The purpose of this project is to develop a more cost-effective, flexible, technique for fixation of workpieces during processing and assembly.Fixtures are an important part during the machining process, especially if you process the parts with high accuracy. Today a large number of fixtures are used at SAAB and they would prefer to reduce the number of fixtures by using flexible fixtures instead. SAAB uses one fixture for each article and this result in a high fixture cost and it also takes time to design and construct a new fixture.There are several advantages with using a flexible fixture such as that you can process workpieces with different length, height and thickness in the same fixture.

AbstractI believe that everyone have the right to understand and be understood. It doesn´t matter if you are an immigrant, suffer from dyslexia or just don´t like to read.In this study I test the difference between a normal written and an easy-to-read routine. I want to know if there is a way to improve a routine in such a way that even people without pre-understanding can comprehend the content.Routines are an important part in many organisations. Staffroutines in nursinghomes don´t exist just to ensure that caretakers are being taken care of in the right way according to the rules and wishes of the organisation. They also exist to make the work with people who suffer from dementia easier for the staff.Routines are in other words very important.

Detta examensarbete har utförts vid Linköpings universitet i samarbete med Scania Transmission i Södertälje och behandlar kravsättning av ytstrukturer samt processer för hårdbearbetning av kugghjul och axlar. Aktuella artikelritningar innefattar endast krav för Ra-värde, den aritmetiska medelavvikelsen för ytjämnhetsprofilen (R-profilen). Förslag på nya parametrar enligt av Scania tillämpade SS-EN ISO standards har tagits fram, detta för att ge en noggrannare beskrivning av vilken ytstruktur som skall uppnås. Resultatet är generellt tillämpningsbart men fokuseras mot kugghjulens hål, plan och diametrar. Vidare presenteras en jämförelse mellan metoder så att transmissionsverkstäderna kan tillverka kugghjul/axlar på ett kostnadseffektivare sätt.

In the following study I probe the social world of hard-rock music. By conducting interviews with four young male enthusiasts of this music I try to develop a general picture of this social world, as well as of the basic elements on which this particular subculture is constructed. The identity of a hard-rocker is based upon a number of factors beyond just a preference for that music. Throughout the interviews I encountered many implicit norms that one must followed in order to be able to see oneself as a true hard-rocker. I also found that from the respondents? perspective, the mainstream culture has, throughout the history of metal music, used various ways to counter the spreading of this genre.

Aim: Culture exists in every organization, whether you actively work with it or not. Old cultures often carry traditions and are hard to change. The purpose of this thesis is to describe Gävle Galvan from an organizational point of view and also to investigate the culture from a gender point of view.Method: The thesis is written with a qualitative and narrative approach. I have taken part in three person?s stories through interviews and thereby created picture of their everyday work on Gävle Galvan.