Within system development users have rarely been involved or received much attention during the development. Most of the times, the primary focus within system development lies on insuring functionality, rather than making the system usable. The literature specifies that a non user-centered approach can contribute to a product with low usability, which can lead to an ineffective and unsatisfactory experience for the end users.The purpose of this thesis is to begin an investigation to see if the use of non user-oriented system development methods is a possible cause of low usability in the final system.To achieve the purpose of this thesis, we have conducted a case study. Within the case study we examined the usability of a time reporting system. The case study included seven minor studies; an investigation concerning the development of the system, an expert evaluation of the system, interviews and observations of users, developed paper prototypes and executable prototypes, both which user testing was performed on.The result of this study shows that by working with user-entered methods, the usability in the time reporting system increased after the design had been revised.

In industrial control systems PID-control remains the prevalent strategy, also for processes that would benefit from model based control. The purpose of this thesis is to evaluate whether model based control can be readily implemented in an industrial control system. To this end a simulated surge tank with a simulated industrial control system is studied. For evaluation two scenarios with specified objectives are selected.Following a review of LQR and versions of MPC, Predictive Functional Control (PFC) is considered the most suitable for implementation. PFC is a form of MPC developed with industrial applications in mind and therefore has several advantages for implementation in an industrial control system.

VSEM project and the need for a more efficient way of handling requirements andinformation are highly apparent.The overall objective of this thesis is divided into two parts:1. To identify criteria/factors leading to a successful introduction of an informationmanagement system.2. To develop an implementation process for a requirement management system ?the first step towards a PLM system in EE development at VCC.This will be done through interviews with employees, a literature review and an analysisof studies of three earlier projects within VCC.The conclusion of this study shows the great need for change in work methods fordesigners handling information and requirements. An implementation process has beenidentified with guidelines on how to handle different phases of the process.

The mainpart of this thesis is about the developing of a new analysis tool to be used in Zenicor Medical Systems AB ECG-system. The primary task of the system is to simplify the ECG survey for patients who suffers from different kinds of arrythmias, for example heart fibrillation. With this system is it possible for the patients to do their ECG survey by them self at home and then send the signal with their telephone or mobilphone to a server. The equipment used to do the survey is not bigger than you can have it in a pocket and this results in a bigger flexibility for the patient. A doctor can connect to the server and analys the ECG-curve and follow up the patients condition..

This thesis describes the process of developing a reservation system for common resources through a TV-interface. The system is developed in cooperation with the company Dreampark and is built to work in their platform for TV, Dreamgallery. The main goal was to develop a reservation system and to make it work with Dreamgallery, to develop a demonstration version of the system. The thesis describes the approach for developing an easy-to-use and customisable program and interface for making reservations. How this is inserted into an existing program in a suitable way.

For the company to work well, it is necessary with a good economy, a high qualitative production and a well working system concerning the environment: the whole cycle on the farm needs to be working. At the same time, debaters about the environmental impacts are also requiring higher demands for the dairy farmers and therefore also the management programs. Management programs for feed evaluation calculations have been more developed over the years. Big amounts have been invested in the new feeding system with NorFor, but no one seems to have asked the dairy farmers what they themselves want to spend their money on, and what they need help with. For the dairy farmers it is necessary that the whole company is controlled in the right way, and much more than just feed evaluation is included in this.

The aim of our study was to investigate how much self-determination persons with intellectual disabilities living in group-homes have when it comes to recreational activities. We studied what the recreational activities looked like, if there was any self-determination concerning recreational activities and which factors influenced self-determination for persons with intellectual disabilities. We used qualitative interviews with persons with intellectual disabilities, next of kin and personnel at group-homes. The result has been analyzed from earlier research, central concepts as self-determination and recreational activities and the theory of empowerment. The most important results that emerged in our study were; that recreational activities for persons with intellectual disabilities varied substantially, that there is a large number of to recreational activities available and no one seemed directly displeased with their recreational activities.

Abstract Children with neuropsychiatric disorders often require special arrangements from the society. These measures could target the child itself, its parents, or other parts of the social network surrounding the child. Parents of children with neuropsychiatric disorders are often deeply engaged both in their child and in these measures.Three parents of children with neuropsychiatric disorders, and four counselors in different habilitation centers, were interviewed. The purpose of this qualitative interview study was to describe the methods with which the counselors worked to support parents of children with neuropsychiatric disorders, and to understand how the parents experienced this support offered by the counselors.The qualitative interviews with counselors and parents followed a thematic interview guide. A structured interview form was used.

At the plant of Sandvik do Brasil in São Paulo there is a need for improving the transport of inserts between the plant building and the stock building. The idea is to install a system with an Automated Guided Vehicle (AGV) to take care of this transportation. The purpose of this report is to present which demands there are on the system and to find the best solution according to the demands.To conclude this work a study was made of the plant and the AGV technology was examined. Several providers of AGV solutions were contacted to get information about prices and detailed solutions.The conclusion was that the most suitable system for this application is a small unit load vehicle using inductive wire as guiding system..

Background: Patients with cervical spinal cord injuries are often dependent on a mechanical ventilator due to the damage on the innervation to breathing musculature. During rehabilitation they have to be trained to regain own breathing. This unweaning process may give respiratory complications, which are main causes to morbidity and death. These respiratory complications are traditionally treated in an intensive care unit (ICU), which means that the patients have to return back to these emergency units.Aim: To investigate number, length and causes of returns to intensive care units and the length of the weaning process. Further, to compare if a multidisciplinary approach to the weaning process may reduce ICU returns and to shorten the weaning process.

Contemporary society focuses heavily on the individual and this is also characterized by an individual thinking that many people contribute to. This is furthermore shared in the field of entrepreneur research studies where a profound deal of time has been focused on the personal qualities of specific entrepreneurs. However, in modern settings today many corporations originate in a team-based structure, which therefore leads towards a different approach rather than examining exclusively on individuality. Previous research shows that entrepreneurial teams are establishing and growing at a steady pace, yet studies within this field has not developed in an extensive fashion. Entrepreneurial teams can be defined as a group of people who share a common goal, usually consisting of two or more individuals who commenced a foundation from the early stages of that specific firm and who originated an initial idea.

Scania provides a fleet management system for hauliers who want to control their fleets in anefficient way. The system includes an onboard computer with touch screen called ScaniaInteractor where the driver can access GPS navigation, order support, message service and otherfunctionalities. The purpose of this thesis is to develop a concept for logging the user interactionon the Interactor and analyze the result which enables further development and optimization ofthe interface.A demonstration application is designed, implemented and tested for the purpose of showing thepossibilities and difficulties with logging of interaction. The result shows that logging is quiteeasy to implement and that the amount of produced data is small and therefore not expensive totransfer via GPRS to a central server where searching and analysis can be done. On the otherhand, the biggest challenge lies in the analysis and interpretation of the logged data and to applyit to the development of the interface.

According to ?Fotförbundet" (2012), Overpronation occurs frequently (80 %) in the Western World and furthermore overpronation of calcaneus influences the position of the pelvic and thorax (Fotförbundet, 2012; Behnke, 2008). The aim of this study is to investigate whether or not it is possible to connect overpronation of calcaneus to the problem in the rider?s seat as observed by the instructors of Strömsholm. The study will also investigate if the riders seat problems as noticed by the riding instructors are comparable with the problems found by the analyst during testing. One purpose with the study is to raise the instructors and riders awareness that anatomical deviations in the rider might influence the rider?s position in the saddle. The questions of the study are: - Is it possible to see seat problems in riders with overpronation of calcaneus? - If it is possible to see more seat problems in riders with overpronation of calcaneus, do the instructors in the study considers the seat problems be similar with each other? - If there are seat problems in the study, is it the same according to the instructors and the analyst in human biomechanics? The hypothesis of the study is that overpronation of calcaneus has an effect of the rider?s position in the saddle. The study is conducted as a blind study where the test subjects have been filmed (from knees down) as they walked barefooted and later while riding.

The author?s common interest for healthy employees, brought reasonto study how line managers can manage and develop this withsupport from HR. Previous research highlights that knowledge ofhow health is promoted is missing. Line managers have a key role inworking with contributors´ health. The aim of the study is toinvestigate how managers are working for the well-being ofemployees and which aid dedicated to line managers from the HRfunction, and how support and the work with employees? health canbe developed.

Seen in many trends and studies, consumers of today feel a growing desire to experience the uniqueness in products and services. This is forcing companies be more innovative and creative in their marketing, in order to distinguish and differentiate themselves and their products/services. We believe that creating a top-to-bottom experience strategy is one way that a company can succeed in this.The purpose of this thesis is to analyze and clarify how a business can reinforce their product experience through a complete experience strategy. In order to demonstrate this we have made a case-study research for the New Wave Group, advising them on how they can place blown glass art at the heart of the town of Kosta.The authors have used qualitative methods and an abductive approach. Four interviews have been completed with executives from the New Wave Group, including the project manager, hotel manager, head of the Kosta Boda smeltery and head of guides and visitors at Kosta museum.