The purpose of this work is to develop and test a design process where quick decisions and model building has a prominent role. The goal is to develop a number of products and build prototypes to be shown during the Carl Malmsten Furniture Studies spring exhibition 2012. I?m also writing a report describing my work.To reach my goal I have each day during the first phase conducted a short research and found a concept based on that days name day. Then I have continued in the workshop and worked with three-dimensional models.

During a fire large amounts of particles and unhealthy agents occur.  Polyaromatic hydrocarbons (PAH) and toxic metals are examples among many others. These agents have a capacity to bond to particles and when the fire is extinguished, the particles can be transferred with the extinguish water into the soil and to the groundwater.Recent studies in particles have been conducted. A study by Ulrika Iverfelt (2014) reviled that the particles from a fire contained large amounts of both PAH and metals, which is consistent with earlier analyses. Her column experiments with particles in the size ? 11 microns and ?100 microns in silica sand, reviled that the larger particles was immobilized because the transportation was influenced by sieving or physiochemical particle and surface interactions.The transport of the particles in soil and groundwater is regulated by two main mechanisms: physiochemical surface interactions and straining.

During 40 years of industrial production, from the end of the 1890?s until the end of 1930?s, coal and wood distillation products were manufactured in AB Carbo?s tar factory along the River Gimån in Grötingen, in the county of Jämtland, Sweden. In accordance with the Swedish Environmental Protection Agency?s Methods for Inventories of contaminated sites, MIFO, the site in Grötingen has been identified as a potentially contaminated site. In order to determine whether toxic substances pose a threat to human health and ecological systems in the area, there was a need to investigate the presence of contaminants, their levels and potential for migration.

Mapping a process enables a greater understanding of the work, and is standard to evaluate and improve a process. This thesis is conducted at Test Bed Mechanical Design at Scania in Södertälje. Test Bed Construction is a complex process, characterized by a large amount of creative work, technical challenges and coordination between different people and different organizational functions.The aim of the thesis was to identify the Test Bed Construction Process and to develop a visual model of the workflow that also served as support for the engineers in their daily work. During the mapping process, comparisons were made with previous research in lean product development to identify process improvement.A literature review on process mapping and process visualisation resulted in a method for process mapping. The study showed that research on process visualisation is neither structured nor well defined.

The county administration asked LKAB to make an inventory of possibly contaminated sites caused by their mining activity. The inventory should be performed according to the MIFO model, a method from SEPA which is used to assess a contaminated site. The first phase involves collection of information through interviews and site inspections and in phase 2 a general survey with field sampling is conducted. LKAB started the work with the first phase of the survey during 2003. During this project the information collected in Phase 1 was evaluated and 16 of the sites were chosen to proceed to MIFO Phase 2 (six sites in Kiruna, and 5 sites respectively in Svappavaara and Malmberget). The sampling of these 16 sites was performed during week 27 2004.

The county administration asked LKAB to make an inventory of possibly contaminated sites caused by their mining activity. The inventory should be performed according to the MIFO model, a method from SEPA which is used to assess a contaminated site. The first phase involves collection of information through interviews and site inspections and in phase 2 a general survey with field sampling is conducted.LKAB started the work with the first phase of the survey during 2003. During this project the information collected in Phase 1 was evaluated and 16 of the sites were chosen to proceed to MIFO Phase 2 (six sites in Kiruna, and 5 sites respectively in Svappavaara and Malmberget). The sampling of these 16 sites was performed during week 27 2004.

Chlorinated aliphatic hydrocarbons (CAH´s) were used widely within dry cleaning facilities and for metal degreasing until their toxicity was discovered. PCE is still used as dry cleaning liquid. Today CAH´s are found in soil environment at places where they have been used in the past. The CAH-concentration in trees growing on contaminated land has quite recently received attention as a cheap and effective way of assessing the extent of a CAH-contamination. The method has however, not been put into use in Sweden.The aim of the study has been to investigate whether the CAH-concentration in tree cores could be used to delineate the spread of CAH in a soil environment under Swedish conditions in different seasons.

Vomb meadows is an area well knows for its rich bird life. During the 19:thcentury until mid 20:th century, the meadows were flooded annually in order toincrease the hay yield. The river Klingavälsån situated along the west side of themeadows, used to be a shallow river, meandering across the landscape. In the1940?s the river was straightened and made deeper.

Habitat selection of migratory brown trout at the upper reaches of River Vindelälven, wasstudied in September during the pre-spawning period. The fish migrate from down- orupriver lakes for spawning in the river and data was collected by habitat mapping andradio-telemetry. Habitat selection of fish was analysed with preference curves andstatistical modelling, using the physical variables; depth, stream velocity and streambedsubstrate. Preference curves were derived by comparing fish habitat use with their nearbyavailable environment while the statistical modelling aimed to answer three main questions.1) Do the trout have a specific preference of depth, water velocity and streambed substrate?2) Is there any difference in habitat selection between sexes? 3) Is there a shift in habitatselection over time? The preference curves indicated that trout favored water depths of 1-2m, velocity compositions characterized as glides (c.

The loss of such great wetlands, which has arose in Sweden the last decades, has created a situation that threats both the function and the biological diversity within the wetlands. Many ecological niches can be found in the wetlands and it is one of the habitats where most different species exist. In the 17th Century people started to ditch damp environments, such as bogs, to create a productive cultivated ground. Further ditches were made when the forestry gave large economical profits. The wetlands were impoverished from both groundwater and nourishment, and this led to a great loss of species.In a corporation with WWF and Skogsstyrelsen in Arvika, the University of Karlstad has participated in the Laskerudproject, a hydrological restoration-project in a forest landscape.

A current conveyor is an active building block that can be used to implement most active and passive components. It differs from the operation amplifier in that it uses current instead of voltage. The current conveyor also has significantly higher voltage gain over a broader frequency range. To simplify the construction of analogue circuits and increase the construction efficiency it is desirable to use a top-down methodology. This means that the whole system is partitioned into a hierarchy of subsystems.

This study examines the background and nature of the credit default index swaption (CDIS) and presentsrelevant methods for modelling credit risk. A CDIS is a credit derivative contract that gives the buyerright to enter into a credit default index swap (CDS index) contract at a given point in time. ACDS index, in turn, is a multi-name credit default swap (CDS). Within the eld of research, thisthesis identi es the CDIS pricing models presented by Jackson (2005), Rutkowski & Armstrong (2009)and Morini & Brigo (2011) as the most recognized and developed. These models are evaluated byreconstruction in a numerical software environment.

When protection zones for wells are delineated, it is important to acquire good knowledge about possible travel time from different points in the catchment area to the well. Often, simple analytical methods are used for estimating travel times and the assumption is made that the hydraulic conductivity is relatively homogenous within the aquifer. Nevertheless, many aquifers are strongly heterogeneous which may lead to differences between estimates and actual travel times. As a part of the process to develop improved methods for delineating protection zones for groundwater supply wells, a tracer experiment was performed in a glaciofluvial esker formation in Järlåsa. On the basis of the experiment, a numerical flow model was created for the test site.The purpose of this master?s thesis was to apply the flow model to an aquifer where the hydraulic conductivity shows great variability and should be described by a stochastic distribution.

Sveriges geologiska undersökning (SGU) ansvarar för den nationella övervakningen av grundvattennivåer. I Grundvattennätet finns drygt 300 mätstationer där grundvattennivåer observeras två gånger varje månad. Grundvattensituationen i Sverige och grundvattenmagasinens fyllnadsgrad presenteras med kartor som konstrueras med data från de uppmätta grundvattennivåerna. För att öka detaljgraden i kartorna syftade detta arbete till att undersöka om beräkningar från den hydrologiska beräkningsmodellen S-HYPE kunde användas för att fylla ut med data där mätningar inte finns tillgängliga. Arbetet utfördes genom korrelationsanalyser mellan uppmätta och beräknade grundvattennivåer för att avgöra noggrannheten i S-HYPEs beräkningar av grundvattennivåer.

3D-modelling in AutoCAD This thesis is done in cooperation with LB-Hus in Bromölla, and have aimed to establish a digital AutoCAD model of one of the company?s house types and to find out what opportunities there are to do visualisations in the form of images directly from the programme. Modeling has been carried out so that the very construction of the house is included. Interiors and installations, with the exception of the ventilation system, have been left out in the model. The model has been created with solid models after a comparative study made between solid models and surface models to find out which option in this case was the easiest to handle and took up the least space.