Eutrophication of the Baltic Sea and Swedish lakes remains a major problem despite many years of effort to reduce the emissions of nutrients. One major source is waste water systems, especially private sewage systems. These sewages accounts for a very large share of nutrients per capita in comparison with citizens connected to larger sewage treatment plants. Norrtälje community has the greatest number of private sewage systems in Sweden. Discharges of nutrients, especially phosphorus, to the Baltic Sea from these sewage systems are significant.

For several years Uppsala University together with several companies has been involved in a WISENET project aimed at improving railway transport security. By placing a sensor system near the wheels of each wagon, the temperature of the bearings can be measured and transmitted to a collector placed centrally on the wagon. This in turn transmits the collected data to RFID receivers placed intermittently along the railway.As the signals are transmitted wirelessly, problems may occur as the antennas get dirty or coated with ice and snow. To determine the effects of these coatings, several tests were performed examining the reflection coefficient S11, the impedance Z11 and the efficiency eta of an antenna, and how they varied when various coatings were placed over the antenna. Examined coatings were ice, snow and water to determine the effects of weather, and various metal-based coatings: powdered iron both pure and partially oxidized, and iron ore granules.

Examensarbetet syftar till att konstruera operatörsgränssnittet till en UGV (eng Unmanned Ground Vehicle) för mobil rekognosering i tätbebyggt område. Operatörsgränssnittet består av både mjuk- och hårdvara. Till operatörsgränssnittet har ett grafiskt användargränssnitt utvecklats där tonvikten legat på användbarhet med funktionalitet för positionering med geografisk presentation och sensorpresentation. Förutom en presentationsenhet för sensorinteraktion och manövrering av farkost ingår en sändtagarenhet för kommunikation mellan operatör och farkost. Två uppsättningar av systemet levererades till försvarsmakten för användning vid metodförsöksstudier..

Running water-pathways have played an important roll in Sweden and frequently been manipulated. One profound change was made during the period of logging when streams were cleared from obstacles as big boulders, sharp bends and side-streams. Dams and different constructions gave control of the stream water and the streams became channel-like with a homogen structure. This interference gave problems for many fish populations and resulted in a shortage of feeding habitat, over-wintering habitat, spawning habitat, unnatural flow regimes, sedimentation, unnatural temperature fluctuations. Many of these historical changes of the watersheds are now subjects for restoration, ie., bring back the streams to what we believed it was before the change. However, what once existed in terms of complexity is now gone and difficult toreplace.

Traditionally, rolling mills use emulsions based on a mixture of oil and water for lubrication. Since two years ago SAPA has been using (instead of oil) a synthetic lubricant so called conditional emulsion for hot-rolling of aluminum. This lubricant is water based and homogenous at ambient temperature, but switches to a two-phase system at heating above the cloud point.This project aims to validate and if necessary modify an existing HPLC method for quantifying two out of three key components (A, B and C) in the conditional emulsion. Attempts to develop a method to quantify the pH adjusting components, X and Y were also made. These two methods are required to optimize the lubricant.Due to the complexity of the components, it has been difficult to present a method for quantification, and HPLC with ELS detection was chosen after a long series of trials.

The report contains a comparison between computer based modeling of evacuation and evacuation experiments with large crowds. Crowd movement, behavior and management is examined, as well as the evacuation time. The conclusions in this report are based on observations made during the evacuation of a football ground (Swedish)..

The dishwasher is a wide spread product that occurs in many households. It saves the user time,water and energy. When using a dishwasher instead of doing dishes by hand a lot of energy issaved.The importance of lowering the energy consumption does not only come from the consumerwinnings but also from an environmental point of view. Scientists are certain that the globalwarming comes from the emission of green house gasses that is created by human consumptionof oil, gas and coal.Dishwashers today are a lot more energy efficient than older dishwashers, but there are stillmargins to lower the energy consumption. The aim with this project is to investigate thedishwasher and it?s washing cycle, noting different phases and components that contribute towaste of energy.

The purpose of this thesis was to make an energy survey and quantify energy flows of individual unit operations associated with the biogas production in Uppsala Vatten och Avfall AB:s biogas plant, located at Kungsängens gård. Moreover, large consumers of energy would be identified and analyzed. The objective of this energy survey was to obtain a detailed understanding of the energy use in the biogas production. The energy survey was divided into two parts: electricity and heat. Each part was treated separately and with somewhat different approach. To estimate the electricity usage during the projcet the rated power of each selected unit operation was noted and multplied with the measured time of usage.

The purpose of this thesis was to make an energy survey and quantify energy flows of individual unit operations associated with the biogas production in Uppsala Vatten och Avfall AB:s biogas plant, located at Kungsängens gård. Moreover, large consumers of energy would be identified and analyzed. The objective of this energy survey was to obtain a detailed understanding of the energy use in the biogas production.The energy survey was divided into two parts: electricity and heat. Each part was treated separately and with somewhat different approach. To estimate the electricity usage during the projcet the rated power of each selected unit operation was noted and multplied with thenmeasured time of usage.

Interference in an ecosystem means a disturbance. When harvesting, forest roads have to be build to cope with heavy duty vehicles. Crossing brooks can not always be avoided. In this case bridges or culverts have to be built. There are many different kinds of culverts and depending on what type you choose and how you place the culvert, the watercourse and the water organisms can be harmed in different ways.

The idea of using algae in different areas and exploring its possibilities is nothing new. Already in the early 1950s microalgae was explored as a possible food resource because of its high protein content. Lately there has been an increased interest in its potential for industrial use. Wastewater treatment is a possible use of algae since the algae grow well on the nutrients present in the water. This offers the possibility to grow algae for nutrient reduction and use the biomass for energy or animal feed since many alga species has a good nutritional value. Approximately 800-1000 m3 water is applied per 1000 m2 of greenhouse area during one season in a tomato production.

The project involves implementing a finished dispersion model into ArcGIS. The goal of the tool is to show how dangerous and toxic substances will travel in the ground after long periods. The goal of the project is to understand GIS in general, what it is used for and gain an insight into how developing tools for ArcGIS is, what challenges might exists. Understanding the type of data that can be stored and accessed in ArcGIS a long with the tools and functionality offered by the system when using Python as the main language for development. A prototype of the tool is created..

Successful broiler production in hot climates requires knowledge of how birds are affected by heat stress. It is important with access to water and good ventilation to facilitate coping with the heat. It may be useful to reduce the consumption of feed during the hottest hours of the days, which together with a few hours of extra light available could improve both productivity and animal welfare. The vision in birds is superior to that of humans and most other mammals. Continuous light and light with low intensity can cause eye injuries, affect the eye development in young chicken negatively, as well as provide increased incidence of foot pad lesions. Access to light affects the production but also the welfare of birds.

It is important for today?s farmers to minimize the costs for crop establishment, because of decreased prices and support from the EU. Farmers, who plow in autumn on heavy clay soil, often do some kind of tillage in autumn to get better soil structure before spring seeding. This is especially important when growing small seed crop, e.g. sugar beet and oil plants.

AbstractThe purpose of this study was to see if there is a connection between smolt length from Brattfors salmon cultivation and temperature. Climate changes are expected to give a higher temperature that could result in a longer growing season for the fish.Cultivated smolt is today bigger than it was before, it is also bigger than the wild salmon. The growth season of salmonids depend on the water temperature, salmonids need 6-80C to grow. Water temperature has been surveyd since the late 50´s in Brattfors. The result shows that it?s now considerable more days per year with higher temperature.