This Diploma work investigates internal air ventilated crawl-space in respect to construction and damp. The Diploma work assumes from a general description of crawl-space and general dump problems in ground construction. An internal air ventilated crawl-space is a construction where you take the ventilation air from the building and bring it down to the crawl-space and lets the air circulate before it passes through a retaining aggregate on the way out from the crawl-space. In this matter you get a worm space under the building and a lot less dump problems in form of · Ground damp · Build damp The ground dump reduces through draining around the building, different layer of gravel between the ground and the building and ventilation of the crawl- space. The build dump reduces through ventilation of the crawl-space as fast as possible.

Hunting ground graves were distinguished as a separate category during the 1930s.         There is however no clear definition of what a hunting ground grave is. They have been constructed over a large area over a long period of time (200 BC-1200 AD) and their morphology varies.This paper investigates how the archaeologists have discussed the hunting ground graves since they were distinguished as a separate category until today. It investigates what concepts that have been used to define and categorize the graves as a group. It also investigates if the choices of concepts are depending on a broader societal perspective.To find the answers to these questions two surveys have been done.

The assignment given to us by NCC was to compose a degree project based on ground excavations for power cables. The aim of the study was to examine suitable excavation methods depending on different possible terrain conditions. The amount of previously written material within this subject is nearly non- existent and therefore there is a genuine interest by the NCC to receive a compilation of different production methods. The greater part of this study is based upon interviews with several companies active within this area of expertise. The technique of placing the electricity grid beneath ground for safety is today getting more and more common.

Hunting ground graves were distinguished as a separate category during the 1930s.         There is however no clear definition of what a hunting ground grave is. They have been constructed over a large area over a long period of time (200 BC-1200 AD) and their morphology varies.This paper investigates how the archaeologists have discussed the hunting ground graves since they were distinguished as a separate category until today. It investigates what concepts that have been used to define and categorize the graves as a group. It also investigates if the choices of concepts are depending on a broader societal perspective.To find the answers to these questions two surveys have been done.

There exist several known methods for calculation of radio coverage for ground-based systems. As far as we know there are no equivalent methods for the case of flying platforms when the altitudes and speeds are significantly different to those of ground-based systems. This thesis describes the theoretical concepts behind calculations of radio coverage for flying platforms. An investigation is made to sort out what is important and possible to employ in a model for simulations. A method is described and implemented in a program for evaluation of flying radio systems.

Couch grass (Elymus repens (L.) Gould) is a severe weed in Sweden, and since both the use of herbicides and cultivation should be decreased, it will become increasingly problematic to control couch. The present work is meant to, by literature studies and an experiment, give some answers to the question if cutting and competition can depress the growth of couch. The experiment was carried out in the growing season 2001 at Ultuna, Uppsala, in plastic boxes. The design was three-factorial randomised complete blocks. The factors were plant combination, nitrogen level and cutting strategy.

With numerous applications in both military and civilian life, the demand for accurate 3D models of real world environments increases rapidly. Using an airborne laser scanner for the raw data acquisition and robust methods for data processing, the researchers at the Swedish Defence Research Agency (FOI) in Linköping hope to fully automate the modeling process.The work of this thesis has mainly been focused on three areas: ground estimation, image segmentation and classification. Procedures have in each of these areas been developed, leading to a new algorithm for ground estimation, a number of segmentation methods as well as a full comparison of various decision values for an object based classification. The ground estimation algorithm developed has yielded good results compared to the method based on active contours previously elaborated at FOI. The computational effort needed by the new method has been greatly reduced compared to the former, as performance, particularly in urban areas, has been improved.

Mechanical scaling is one of the most complex operations of all in the mining process. The operators are using both hearing, sight and feel to read the rock and to know where to scale and where to leave. They say they go on gut feeling in great extent, something that comes with experience. The scaling machine is placed into the edge of unsecured and newly blasted rock to hammer off the blocks that has become loose after the blast, but not enough to fall down. It goes without sayingthat it is a risky job.

The purpose of this study is to investigate if there is enough consideration taken to sensitive forest areas close to water or wetlands during clear cutting assignments, and to estimate the extent of damage made by forestry machines used at that time. A field and literature study is used to show how to improve and prevent the damage made in the wake of the machines. This study is made for Sydved, and shall culminate in a policy to prevent ground damage during their clear cutting assignments. The areas which were part of the field studies were clearcuttings on fine grained soil close to water and wetlands. The purpose was to find out if the water had been affected, what had been done to prevent ground damages and what more could have been done. The results of the field studies show that more work needs to be done to reach up to expectations. More information about the assignment area, better planning of sensitive regions, and strengthening of the main haul roads with brush are some of the improvements that can be done. There is also a need for more exact guidelines, follow-ups and education for everyone involved to have the same goals and understanding to prevent ground damage..

En designers främsta uppgift är att hitta lösningar på problem som är svårformulerade vilket kräver full förståelse för designsituationen. Interaktionsdesignern fungerar dessutom som länk mellan olika aktörer i en beställarprocess med syfte att tillgodose slutanvändarens behov, som ofta faller mellan stolarna. Avsikten med denna rapport är att studera hur interaktionsdesignern kan vara den kommunikatör som krävs. Detta har gjorts genom att titta på hur objekt används i kommunikationen mellan designern och dess klient. Studien är gjord genom en videoanalys som tolkats utifrån Herbert H.

When building a house or similar the stress on the ground increases and deformations can arise. The deformations create a foundation that the building is not constructed for and damages on the building arise. The increased stress on the ground can be derived back to the building, but it is possible that the increased stress may well derive from different sources such as other buildings or trees.       The building is an older property, built in the late 19th century alternatively early 20th century, and is today used for rental housing and has suffered severe damages due to subsidence. The goal of the thesis is to find possible causes for these subsidences. The thesis was executed as a combination between literature- and casestudie. After careful studies it has been found that a probable cause for these subsidences is trees. Through field- and lab studies it has been found that the trees has effected the ground through there accumulation of water.

The Battle of Breitenfeld took place in 1631, during the 30-year war. It was the biggest battle the Swedish army has participated in. The essay analyses the battle from a Swedish-Saxon perspective, using the basic skills, ground tactical principles and management philosophy of decentralized command.The essay is based on a case study stemming from a qualitative text analysis, and is as such divided into three parts. The first part of the essay describes my theory, and explains what the different terms stand for. The second part narrates the battle and the participating armies.

The objective of a site leasehold is to allow the lessee to occupy a specific plot of land. In return, the lessor imposes an annual ground rent. The ground rent ownership gives the lessor the possibility to capture the increasing in land value. As such, the rent is based on the value of the land multiplied with a percentage that reflects the yield of the land value. It is renegotiated every ten years.

Approximately 4000-5000 hectares, of SCA´s forest land area in Västerbotten, are in need of pre-commercial thinning (PCT) every year. Within the management district, the areas annually treated with PCT must increase, in order to decrease the area with an urgent need for PCT. This can be done by employing more forest workers or entrepreneurs, by mechanized PCT or by an extended season for PCT. Positive experiences from a private forest owner, who started to carry out PCT when the first snow came and then continued for several months, gave an idea to investigate the possibilities to prolong the season of PCT. The purpose of this experiment was to compare PCT carried out when there was snow on the ground with PCT performed when there was no snow on the ground.

Fuel pellets are in Sweden mainly produced from sawdust and cutter shavings. Before the pelletising process the raw material is dried to attain consistent moisture content and ground up in a hammer mill. In the densification process (pelletising) the ground material is forced through holes in a rotating die. This heats up the wood particles which cause them to soften and self bond. After the process the pellets are cooled, sieved and bagged. The milling process creates a wide range of particle sizes.