This master thesis comprises analysis and dimensioning of a keyed joint between a generator axis and a hub with aid from the FEM-software ANSYS Workbench 13.0.The generator axis is a part of a hydroelectric power station that generates electricity with a reactions turbine, a Kaplan turbine. The existing keyway consists of one parallel key with the width 90 mm and height 45 mm. Due to a planned increase of the power of the generated power with 32 % a design study was needed to see if the keyed joint would be suitable for the extra force. Because of the fact that the axis diameter is bigger than the standards covers/recommends a the keyway had to be re-dimensioned. In an earlier assignment from Skellefteå Kraft AB to Sweco Energuide the keyway was planned to be properly dimensioned, but no final solution was approved.During this master thesis a number of different numerical tests were made.

This master thesis comprises analysis and dimensioning of a keyed joint between a generator axis and a hub with aid from the FEM-software ANSYS Workbench 13.0.The generator axis is a part of a hydroelectric power station that generates electricity with a reactions turbine, a Kaplan turbine. The existing keyway consists of one parallel key with the width 90 mm and height 45 mm. Due to a planned increase of the power of the generated power with 32 % a design study was needed to see if the keyed joint would be suitable for the extra force. Because of the fact that the axis diameter is bigger than the standards covers/recommends a the keyway had to be re-dimensioned. In an earlier assignment from Skellefteå Kraft AB to Sweco Energuide the keyway was planned to be properly dimensioned, but no final solution was approved.During this master thesis a number of different numerical tests were made.

Background: Practical blood flow restriction (pBFR) combined with resistance training has been proven to facilitate muscle strength despite training at low intensity. However, research investigating the effects of long-term pBFR-training and its periodization with strength training (ST) at a higher intensity is lacking, as well as the effects of occlusion training on blood lactate levels (BLL) over time.Purpose: To compare the effects of 2 weeks of pBFR training followed by 2 weeks of ST (BFR-ST) with 2 weeks of ST followed by 2 weeks of pBFR training (ST-BFR) on anaerobic performace and BLL.Method: 5 adults (age 23 ± 2 years) with a minimum of 1 year of ST experience were recruited and randomized into BFR-ST (n=2) or ST-BFR (n=3). Anaerobic performance was measured using a 30-s Wingate-test and BLL samples were collected <1 and 5 minutes post-Wingate. Data and samples were collected before the intervention and after the 2 protocols.Results: No differences were seen between groups in anaerobic output or BLL after 4 weeks of training (p>0,1 for all values). A decrease in time to peak power (tPP) were seen in both groups with an advantage for BFR-ST (-37 ± 8 %) over ST-BFR (-27 ± 22 %).

Thesis purpose The study aims to examine the effects vertical and horizontal line extensions might have on the total parent brand equity in terms of strength and its baseline product regarding of market share, loyalty and penetration under an elapsed period of time. The study aims to investigate a number of actual conducted line extensions effect on the above mentioned aspects of Kellers (1993) definition of brand strength as a part of the total brand equity. Methodology The effect of a number of line extensions of the parent brands and the baseline products is being examined in terms of market share, loyalty rate, cannibalization and market penetration. The thesis is focused on the correlations between these different parameters during a certain elapsed time ratio in order to test our theoretically routed hypothesizes in a deductive manner. Occasional correlations are derived from an indexation of data collected from the Gfk database. Theoretical perspective The study is derived from Kapferers (2004) definition of brand equity, where he is dividing the concept into three parts. This study is focused on Brand strength in particular, which is one of the parameters in the above-mentioned theory.

In this thesis tests has been performed on the pull strength of screws glued into glulam beams.The experiment is based on the already approved method whereby the diameter of the drilled holes is the same as the screw outer diameter of 1 mm or bigger. The screws strength class shall not be less than 4.6 (EN ISO 898-1:1999, 1999).The difference in the experiments that were performed where that the drilled diameter were 1 mm smaller than the outer diameter of the screw so that the screw thread was worked into the wood.In the tests the gluing where made on M8 glulam beams. The screws where drilled at and angel of 90°tangental to the fiber direction with a diameter of 7 mm. The gluing of the screws where made in three different depths and where later exposed to pulling forces. The results showed both pulling breaks and screw breaks when they reached their maximum capacity.

Thesis purposeThe study aims to examine the effects vertical and horizontal line extensions might have on the total parent brand equity in terms of strength and its baseline product regarding of market share, loyalty and penetration under an elapsed period of time. The study aims to investigate a number of actual conducted line extensions effect on the above mentioned aspects of Kellers (1993) definition of brand strength as a part of the total brand equity. MethodologyThe effect of a number of line extensions of the parent brands and the baseline products is being examined in terms of market share, loyalty rate, cannibalization and market penetration. The thesis is focused on the correlations between these different parameters during a certain elapsed time ratio in order to test our theoretically routed hypothesizes in a deductive manner. Occasional correlations are derived from an indexation of data collected from the Gfk database.

This bachelor thesis looks at developers knowledge about web security both regarding their own view on their knowledge and their actual knowledge about vulnerabilities and how you mitigate against them. Web developers knowledge regarding web security are becoming more and more important as more applications and services moves to the web and more and more items become connected to the internet. We are doing this by conducting a survey among developers that are currently studying in the field or are working in the field to get a grip on how the knowledge is regarding the most common security concepts. What we saw was that the result varies between the different concepts and many lack much of the knowledge in web security that is getting increasingly more important to have..

Tryckhållfasthetsutveckling hos broar. En studie av svenska broar byggda under 1900-talet.

Oestrus in dairy cattle has changed over the last decades, the duration has decreased and the intensity of oestrus has declined. A possible explanation can be their high and increasing milk production. Heifers ability to show oestrus is probably not affected to the same extent. The aim of this study was to estimate and compare oestrus duration and strength in heifers of the Swedish Red and Holstein breeds. Standing oestrus has been the primary oestrus sign during many years.

This bachelor thesis looks at developers knowledge about web security both regarding their own view on their knowledge and their actual knowledge about vulnerabilities and how you mitigate against them. Web developers knowledge regarding web security are becoming more and more important as more applications and services moves to the web and more and more items become connected to the internet. We are doing this by conducting a survey among developers that are currently studying in the field or are working in the field to get a grip on how the knowledge is regarding the most common security concepts. What we saw was that the result varies between the different concepts and many lack much of the knowledge in web security that is getting increasingly more important to have..

Cement manufacture accounts for 3-5 percent of total global carbon emissions. There is a growing interest in reducing the environmental impact and conserve limited natural resources. In cement production, clinker productions consume 87.5 percent of the total energy consumed in the cement manufacture.Cementa has since many years, focused on reducing the environmental impact of cement production. The work has involved the entire production process from selection of alternative fuels to the development of cement with less clinker content. During 2013/2014, two new types of cement (Bascement and CEM II / B) will be introduced to the Swedish market.

Term: Spring term 2007Study objects: Reitan Servicehandel AB, Vi-butikerna, ICA Sverige ABPurpose: The purpose of this study is to analyse how procurement is used as a strategy to achieve better competitive strength, within the retail food industry.Theoretical: The theoretical chapter illustrates different procurement organisations, multiple and single sourcing, brand equity, consumer behaviour and involvement, Efficient Consumer Response including supply chain and category management and finally Demand Chain Management.Method: For the case studies, three food retail companies have been interviewed: Reitan Servicehandel AB, Vi-butikerna and ICA AB. To illustrate how consumer behaviour influences retail food market, several secondary consumer research studies have been analysed.Conclusions: The results indicate that the procurement organisation can achieve a better competitive strength by a centralised organisation, which make it possible to improve conditions of terms when ordering higher purchase volumes. The sourcing strategies can improve a company?s power within the supply chain. All companies within the study had a very good knowledge about consumer behaviour.

Volvo Cars in Skövde manufacture and assemble Volvo engines. When attaching the ignition coil to all 4-cylinder engines, a special mounting tool is required. This mounting tool is currently manufactured from injection-molded polyoxymethylene (POM), a thermoplastic. It has been noted that the life span of the tool is shortened as a result of abrasive wear that occurs during the attachment process of the ignition coil.An investigation of the possibility of manufacturing the mounting tool with a 3D-printer is undertaken in cooperation with ÅF, a consultant to Volvo Cars. A literature study is first presented to introduce broader knowledge on the subject.

In this study I investigated whether the strength in the manual response for emotional and neutral stimulus search arrays can explain some of the difference in reaction times (RT:s) for emotional stimuli, or not. Earlier, perceptual, cognitive and attentional processes has mostly been used to explain the variance in RT:s. Thirtythree individuals were asked to, as fast as possible, detect a target picture among distractor pictures in 3 rows x 4 columns arranged search arrays. The pictures were categorized in fear relevant animals (snake, spider) and neutral animals (cat). The results showed, more correct responses for cat target.

This technical report describes the master thesis in material engineering called ?Testing of surfaced hardened materials conceivable for gears and shafts?. The work extents 20 academic points. Land systems Hägglunds manufactures and sells different kinds of combat vehicles and terrain vehicles. Since the demands for bigger and stronger vehicles increases all the time, so are the demands on shafts, gears and other transmission details.