The classical age cities of Palenque and Tikal where ones great Mayan bastions with extraordinary architecture.  This architecture still fascinates modern archaeologies and historians alike. Still much of the architecture in the Mayan cities had the same style and function, but could diverse from town to town. This is the case of Palenque and Tikal. They share much of their buildings like temples, palaces and ball courts.

This thesis examines a sample of Pitted Ware pottery from the Gotlandic site of Ajvide in regard to the spatial and temporal relationship of the shards. Ajvide Stone Age site have been extensively excavated over the past 25 years and the most recent analysis of pottery was carried out by Inger Österholm in 1987 and new analyses of the material are therefore greatly needed. Pottery from three sample areas was analysed in regard to their distribution, decoration, fragmentation, part of pot and quality of the goods. To analyse the material in a contextual way a multivariate statistical analysis called correspondence analysis was used. Two areas denominated ?dark areas?, which Österholm defined previously, as possible ritual sites, and one reference area with mixed material were chosen for the analysis.

The aim of this study was to examine young adult cannabis users? attitudes towards cannabis and their perception of the normalization of cannabis. The purpose was also to explore how their views of cannabis correspond with norms regarding cannabis. This study is based on interviews with five young adult cannabis users. The theoretical framework is based on Parker?s normalization thesis, Goffman?s notion of stigma, Becker?s definition of outsiders and the definition of social identity developed by Stone.

Many archaeologists have been intrigued by how often symbolic houses of varying forms are used on the burialgrounds of the Scandinavian Bronze Age. Some scholars even claim that to deal with the dead did not mean to set them apart from the world of the living during this period. Since several examples show that there seem to be an active connection between the ship-setting and different types of symbolic houses, this study seek to demonstrate and interpret how the ideology behind these symbols vary between three regionally different Swedish areas: Halland, Småland and Gotland. The purpose is to show that the way chosen to shape the symbols materially not only had fundamental impact on the organization of the burialground itself, but also on how the surrounding world came to comprenhend and use them. This study suggests that even though the special shapes of the graves and the gravefield itself can carry meaning, the materialization of the monuments can be interpreted as incorporated in a practice of remembrance in where the individual shaping of the grave most probably formed part of a greater story..

The purpose with this report is to illuminate the construction solutions and the deformations that could exist in medieval parish stone churches. But also to increase the writers understanding how activity forces effect the construction of the churches. With help from literature and a practical study, containing three churches the writers have collected the material that the conclusions and discussions are built upon in this report. The construction of the churches consists of three parts, the wall, the roof and the vault. The construction solutions are similar in the churches disregard of the roof, where the roof trusses are different.

The purpose of the research is to find out how the teacher of the pre-school looks at the value of the nature Pre-school. To get an understanding of what the nature pre-school enviorment can bring, we are talking about learning, knowledge, and experience combined with the everyday lessons learned from the natural world. The research is a stepping stone on the pre-school teacher?s thoughts and reflections of what a nature pre-school is. This is grounded in a view of how having options for alternative schools lead to wider research, and all conclusions where formed after multiple interviews and analysis.The results showed that the teachers involved are very positive to the nature pre-school environment and learning process.

Due to increasing regulations regarding new diesel vehicles particulate matteremissions the new Scania truck, Scania Euro 6, has been equipped with a particulatefilter. This component effectively stores the particles in the exhaust gas but must becleaned in order to prevent itself from clogging. The filter is cleaned through aprocess named regeneration which is a thermodynamic process in which thetemperature of the filter is raised through fuel supplied to the exhaust gas.The purpose of this thesis is to contribute to the development of improved controlstrategies of the temperature during the regeneration process through thedevelopment of model-based controllers. These controllers are designed in order tohave good performance in stationary as well as automatic regeneration.In order to develop these model-based controllers a model of the system isconstructed. The model is described as a linear thermodynamic grey-box model withflow varying parameters, showing good results in validation.The model provides a simulation environment during the controller design, which isfocused around the development of linear regulators with the exhaust gas mass flowas a scheduling variable whose size determines controllers? mode of operation.

This is a graduate work at the Swedish University of Agricultural Sciences, The Department of Urban and Rural Development, Ultuna. The purpose of this paper has been to find out and describe principles for designing parks that offers good recreational and aesthetical values and require little amount of carbon dioxide emissions during their maintenance. The purpose has also been to see if it's possible to use city wastewater in some extent to assure the plants water supply and to find other means to make it less necessary to use purified water for watering. Recently made studies as well as older ones show how important green areas are in dense city structures both from a health and a climate perspective. Trees and other plants adsorbs different forms of air pollution and can also lower the temperature in the surrounding area through their transpiration.

There are many different recommendations on how to keep pelargoniums over winter, but most of the recommendations suggest ?the higher the temperature, the more light and water the pelargonium needs?. The purpose with this paper is to try to explain the best and the worst results that are achieved with different storage alternatives of zonal pelargoniums. The results are based on an orientating investigation carried out in January-February, and a questionnaire that members of the Swedish Pelargonium Society answered to. Both the orientating investigation and the questionnaire showed that zonal pelargoniums are best stored light and cold but frost free. They should be irrigated according to their needs which is when the soil is dry, about every second to third week. Zonal pelargoniums are very resistant to drought and can survive without water for at least 44 days, both when kept under light and cold as well as under light and warm.

ästerbottens färgrika stenskatter - Spatiala presentationer och analyser av skifferfynd i Västerbottens län(The colorful stone treasures of Västerbotten ? Spatial presentations and analysis of slate artefacts in Västerbotten County)This essay pertains to the spatial distributions and analysis of slate artefacts in Västerbotten County, Sweden. The authors aim is to give answers the issues of what the distribution patterns of slate artefacts can tell us about the prehistoric humans in this area. By using GIS software and geospatial analysis the author strengthens the theories about separate interior and coastal economies, as well as the theory that the main share of production of slate artifacts are linked in the interior of the County, the author also refers to earlier research, both domestic and international. The theories of non-pragmatic preferences by the late Mesolithic and Neolithic people for red colored slate are also added to.

Due to increasing regulations regarding new diesel vehicles particulate matteremissions the new Scania truck, Scania Euro 6, has been equipped with a particulatefilter. This component effectively stores the particles in the exhaust gas but must becleaned in order to prevent itself from clogging. The filter is cleaned through aprocess named regeneration which is a thermodynamic process in which thetemperature of the filter is raised through fuel supplied to the exhaust gas.The purpose of this thesis is to contribute to the development of improved controlstrategies of the temperature during the regeneration process through thedevelopment of model-based controllers. These controllers are designed in order tohave good performance in stationary as well as automatic regeneration.In order to develop these model-based controllers a model of the system isconstructed. The model is described as a linear thermodynamic grey-box model withflow varying parameters, showing good results in validation.The model provides a simulation environment during the controller design, which isfocused around the development of linear regulators with the exhaust gas mass flowas a scheduling variable whose size determines controllers? mode of operation.

The survey is a qualitative study that aims to investigate the ethnic housing segregation in the residential area around Malmvägen that is located in Sollentuna. Malmvägen is a millionprogramarea that?s made up of unattractive tall buildings with grey facades. The majority of the residents have foreign backgrounds and the unemployment rate is high among the youths in the area. The apartment rents on Malmvägen are low and many of the residents belong to the subclass of society.

Often, the green is handled as an opposite to the built, but if it could be seen as a part of the built and the society, the planning will be easier to handle. The thesis work wants to create a method that treats villages in an analytic way in a context; with green, blur, grey and all the other colors that together are the completeness.This master's thesis is made to be used as foundation in detail plannng in the municipality of Örkelljunga. Target audience is on one hand those who work with planning and green matters in Örkelljunga municipality, but also other planners who work with landscape.Literature in the field of green city planning has been studied and 30 methods for analysis have been valued. The method for analysis that has been used in this work is a merging of ten different methods and has included literature studies, sketches, interviews and work on spot. The ten methods are consciously chosen to together make one comprehensive and true image of the village, as far as it is possible.

This thesis analyses the decoration on the pots of the Pitted Ware Culture on Gotland. The pottery from this period is richly decorated with various ornaments, the most common are the pits but other types of decoration occur. The purpose of this study is to get an insight into what the patterns meant to the people that made and used them and what role these may have played in their lives. The author will analyse the decoration on potsherds found from the three Pitted Ware sites of Visby, Ajvide and Hemmor on Gotland. This will be used in a comparative analysis to investigate if differences and/or similarities of the pattern occur between and among the sites.

The aim with this study was to investigate the effects a change of manufacturing process would have on the mechanical properties of drill bits made of a WC/Co composite used for stone cutting. The method used today is sintering, where the material is heated in a conventional sintering oven. The other method was microwave sintering, where the material is heated by radiation in the microwave region. Also an investigation of the manufacturing cost were made.The main difference between the two heating methods is that the conventional way is a rather slow process and the microwave method is very fast. The material is also heated homogeniously in the method with mirowaves, aposed to the case with the conventional sintering where the material is heated from the outside in.This makes the material harder and more wear resistent.