The demand for environmental assessments on buildings and energy consumption is increasing as well as the energy performance requirements for buildings. At the same time it is increasingly common with self-producers of heat and electricity generation.The main purpose with this master thesis is to investigate how time resolution affects the environmental assessment of energy consumption in office buildings connected to district heating (DH). Environmental assessments were done with both attributional LCA and consequential LCA with system expansion.Fortum´s DH system in Stockholm was analyzed and district heating production was simulated in a Matlab-model. Greenhouse gas (GHG) emissions for the production were calculated. The heat demand of the office Gångaren 16 in Stockholm was simulated in IDA ICE.

The high feeding value of red clover makes it into an important species in Swedish agriculture. There are three different maturity types grown in Sweden, early, medium late and late. The time for heading, regrowth and winter hardiness is affected by the maturity type, but there can also be other factors that are affected by the maturity type, for instance fiber content. In a greenhouse experiment three red clover varieties of different maturity types were compared; early Titus, middle late SW Nancy and late SW Torun. The features compared were fiber content and differences in development rates.

Reducing the CO2-pollution, resulting from the combustion of fossil coal for energyproduction, is important to affect environmental changes. One way to achieve a reductionis to use the oxy-fuel technology. The technology uses O2 and re-circulated flue gasduring the combustion which results in a flue gas mainly consisting of CO2. The flue gascould then be compressed and stored without environmental effects. A problem thatfollows from the compression is the risk of acidification in sensitive parts of the process.Acidification can occur because of reactions following from the contact of condensedwater and sulphur- and nitrogen-oxides which are also present in the flue gas.This report compiles and evaluates the basis of a scientific unit with the purpose ofexploring the possibilities of extracting impurities of SOx and NOx from the flue gases.The dimensions of the unit are based on basic conditions, defined for an existing oxy-fuelprocess at Chalmers, and on the results of computer modelling.

The release of green house gases and the environmental impacts humans have on the environment are huge and might cause irreversible changes to our earth. Meat is considered to have large impacts on the environment, especially beef meat and therefore there have lately been considerable discussions on the sustainable level of meat consumption and production. The main goal with this thesis is to study sustainable meat production and meat consumption in the county of Dalarna in Sweden. Indicators for sustainable meat production and meat consumption were developed and applied on three cases. Interviews were carried out with a municipality in the region that represents the consumer and three beef farmers that represents the producers.

Humanity faces a major challenge with the climate and environmental crisis, largely driven by reckless recourse use and greenhouse gas emissions by corporations. The EU?s Corporate Sustainability Reporting Directive (CSRD) aims to standardise corporate sustainability reporting, making practices more transparent and comparable. This directive seeks to enhance sustainability practices and guide market forces towards sustainability, supporting the EU?s goal of net-zero emissions by 2050.

Private individuals can voluntarily buy EU Allowances (EUA) in order to remove them from the European Union Greenhouse Gas Emission Trading System (EU ETS). It leads to progressive reduction of total carbon dioxide emissions in Europe. Kalmar Energi offers customers to obtain one EUA (equivalent to one ton of CO2) per year by paying 25 SEK a month as a KlimatEl-supplement. The purpose of this research is to examine the customers? attitudes in the issue of climate compensation and trying to define the reasons behind their choices.The results of the quantitative questionnaire were analyzed by using descriptive and analytical statistical methods and have shown some correlation between customers? ages and decisions to accept or not the offer of KlimatEl.

Aim: The nuclear accident in Fukushima, Japan, raised global criticism against nuclear power. In Sweden, the criticism has not been very visible and the government now allows a renewal of the nuclear power plants. The purpose with the study is to have a closer look on how Swedes in position of power motivate their positive attitude to nuclear power and how they conduct themselves to each other and to their opponents. The rhetorical perspective will be in focus for the analysing.Method: Four different artifacts represented by Swedes in position of power having a positiveattitude to nuclear power were chosen. Three rhetorical theories (the rhetorical arena, stasis andethos, pathos and logos) were used with the research question in focus.Result & Conclusions: The analyses resulted in conclusions about the strategies used by the participants such as: the importance of contexts, meaning for example that the greenhouse effect legitimizes nuclear power as a source of energy with important benefits.

Deposited waste material degrades within a short period in anaerobic environments. The methane gas that is formed provides a harmful contribute to the greenhouse effect, 23 times larger impact than carbon dioxide. It is therefore desirable to minimize the emissions of methane gas from landfills. This may be achieved by drain the landfill of gas. In this thesis the amount of produced methane gas at the landfill at Örebro has been calculated. Estimations have also been made of the amount of methane gas that might be produced in the landfill in the future.

The release of green house gases and the environmental impacts humans have on the environment are huge and might cause irreversible changes to our earth. Meat is considered to have large impacts on the environment, especially beef meat and therefore there have lately been considerable discussions on the sustainable level of meat consumption and production. The main goal with this thesis is to study sustainable meat production and meat consumption in the county of Dalarna in Sweden. Indicators for sustainable meat production and meat consumption were developed and applied on three cases. Interviews were carried out with a municipality in the region that represents the consumer and three beef farmers that represents the producers.

A Biogas plant in SLU?s (Swedish University of Agricultural Sciences) management sustains to behave in con-nection with the new animal stables at Lövsta. There will primarily manure from stables that rot to biogas. The biogas plant will also have the capacity that rot others substrates that can arise in the farm operation. The aim with the biogas plant is to produce non fossil electrical and gas heat for own customs, to reduce smell impact from stables and to make possible different types of research investments within the area.This study has implemented multiple cases study of different investment scenarios.

In this study, the efficiency of a newly launched predatory mite, Amblydromalus limonicus, has been examined for its potential to use as a biological control agent in cucumber production. A. limonicus can be used for biological control of two thrips species, Frankliniella occidentalis and Thrips tabaci. Field trials were conducted in greenhouses of two conventional cucumber growers in Scania, the southern part of Sweden. The basic control agent used against thrips was the predatory mite Amblyseius swirskii. In selected areas, additional A.

The short term effect of phosphorus in sewage sludge was investigated to establish howmuch of this a farmer can grant him- or herself, if using sewage sludge as a phosphorusfertilizer. Possible differences in plant availability between sludge phosphorus precipitatedby iron, aluminum or calcium integrations were studied in a sandy soil at two pH levels.The sludges were analyzed using pot and incubation trials. As the intention was to investigategrowth limitation due to phosphorus deficiency, a soil with low phosphorus supplywas chosen as well as a low phosphorus application rate. Sludge corresponding to 12kg phosphorus per hectare was applied. Treatments fertilized by sludge were compared totreatments where 0, 6 and 12 kg phosphorus per hectare from mineral fertilizer was applied.Every treatment was replicated six times.

Shock absorber units play a key role in establishing the driving dynamics and performance of automobiles. Öhlins Racing has manufactured high-tech automotive shock absorbers for over 30 years. Öhlins Racing?s advanced technology has contributed to over 200 world championships in automobile racing. Öhlin?s manufacturing process has long utilized automated fluid filling equipment during the final shock absorber unit assembly stage. The filling process consists of vacuum pumping the shock absorber unit and subsequent transfer of fluid. Vacuum pumping is necessary to remove residual air from the shock absorber unit prior to initiating the liquid filling stage. The presence of undesirable gases drastically compromises the performance of a shock absorber. The filling degree, defined as the final ratio of air to oil, is determined by the specific filling protocol as well as the specific equipment utilized.The current investigation aims to develop a viable technique to accurately determine residual air content in shock absorber units. If the filling degree can be appropriately quantified for a specific manufacturing process, then the air/oil ratio may be quantitatively related to shock absorber performance. The utilized measurement method must be completely integrated into the manufacturing process to guarantee shock absorber performance specifications according to the manufacturer?s standards. By utilizing the measurement method developed in this work, the manufacturing process, manufacturing equipment and product specifications can all be tailored to provide improved filling conditions.The developed measurement method provides accurate quantification of the filling degree under a wide range of processing conditions. The method establishes the relative quantity of air in the shock absorber unit by performing in-situ compressibility tests. The fill ratio can be controlled and varied by manipulating the vacuum pressure exerted during the filling process. Performance tests, however, indicate no correlation between filling degree and unit performance..

Due to the increase of the emission of greenhouse gas and climate changes more and more customers demand environmentally sustainable products. The increased demand of sustainable products from cradle to grave is something that has affected the food sector. Many retailers within the food sector feel that they are less or more forced to be environmentally friendly. Nowadays many retailers have chosen to show customers and stakeholders that they want to ?do good? by publishing annual sustainability reports. The Swedish food market has been one of many markets investing in being environmentally friendly.

The aim of this thesis is to improve the control of urea injection at the combined power and heating plant Framtidens Gärstad (FTG). Tekniska Verken i Linköping AB is the owner of the plant.The FTG plant consists of a boiler where garbage combustion is done. From the combustion nitrogen oxides are emitted. These nitrogen oxides are hazardous to the environment. To reduce the nitrogen oxides, injection of urea into the boiler is used.