The environment has become an important part in people´s lives, and in today´s society stakeholders demands have increased upon companies when it comes to sustainability reports. How these sustainability reports are designed depends on whom it?s for, laws and regulations, and the companies own norms and values. The purpose of sustainability reports is to measure, monitor and compare a company´s enviromental impact. It?s not only about integrating economics, but also enviromental and social standards together to get both financial and competitive advantages.Sustainable Value method is a new model and is the first real method that can be used to evaluate a company´s resources, both financial, social and enviromental to a sustainable value.This model is used to compare the resource efficiency between companies.In this thesis, a documentary study with an experimental approach has been made.Sustainability reports from six selected companies (in the engineering and forestry sector) have been investigated with respect to their accounting for carbon dioxide, and an experiment using the method ?Sustainable Value Approach? was subsequently performed.

se PDF.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area.

This thesis aspires to construct a routing optimization method customized for Volvo Powerstrain?s manufacturing plant in Skövde, Sweden. In order to enforce Volvo?s own understanding and control of there own organization, as well as optimize the utilization of the in-house tow trains, the BRO methodology where created. The methodology where created from observations of the currents working environment, analysis of order data as well as a comparison with two similar producing factories.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The aim for this bachelor thesis is to find an answer for the placement of Migration and Vendel period graves on preexisting house constructions in Sweden. The reason behind these graves being built on their respective places will be analyzed, discussed and compared with similar finds in Scandinavia, where a wide contact net had been established during this time. Different kinds of social and religious meanings and functions with the grave mounds will also be taken into consideration during the discussion and analysis. The actual findings in the graves will be not be a part of this thesis, as the aim is to focus more on the grave itself as a cultural and social symbol for the people, and the values it had, during the time period it was built..

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The present study examines the demolition of a house on Hammarkulletorget in 1996 and the discourse of Hammarkullen, Gothenburg(Sweden), drawn from the perspective of historicization [?historisering?]. I have examined how the past played role inpresentations of Hammarkullen and how the past affected the decision to demolish a house. By examining which role the neighbourhood?spast time played in the perception of the neighbourhood, the thesis aims at providing a better understanding of howthe past can influence and legitimize major changes in the urban environment.In the early 1980s the image of Hammarkullen as a victim of negative publicity is established and this reputation lives beyond thesimplistic and negative descriptions themselfs.

Today's climate and environmental issues have now been up for discussion for quite long. Various environmental measures have been taken, but it is not always certain that those measures actually are for the better because of the complexity of our environment. Therefore, studies of whole life cycles are very important even if they are time and resource intensive.Real estate accounts for 15% of global carbon emissions, but also affects our environment in many other aspects. In Sweden this number is even higher. About 30 % of its carbon dioxide emissions originates from building sector and changes are therefore of great importance.

 This paper covers how a company must act to become ?greener? and yet still increase profitability with the main emphasis on the inner structure of the company. The research is focused on the Swedish security systems company Niscayah AB, part of the multinational corporation Niscayah Group with approximately 6000 employees. A company can be assumed to consist of seven parts (strategy, systems, structure, super-ordinate goals, staff, skills and style) that have to cooperate for the firm to be able to become more environmentally friendly. Also, the economic performance is of importance and therefore that too is examined.

Today's climate and environmental issues have now been up for discussion for quite long. Various environmental measures have been taken, but it is not always certain that those measures actually are for the better because of the complexity of our environment. Therefore, studies of whole life cycles are very important even if they are time and resource intensive.Real estate accounts for 15% of global carbon emissions, but also affects our environment in many other aspects. In Sweden this number is even higher. About 30 % of its carbon dioxide emissions originates from building sector and changes are therefore of great importance.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

Deposited waste material degrades within a short period in anaerobic environments. The methane gas that is formed provides a harmful contribute to the greenhouse effect, 23 times larger impact than carbon dioxide. It is therefore desirable to minimize the emissions of methane gas from landfills. This may be achieved by drain the landfill of gas. In this thesis the amount of produced methane gas at the landfill at Örebro has been calculated. Estimations have also been made of the amount of methane gas that might be produced in the landfill in the future.