The main purpose of a Flight Data Recorder (FDR) is to facilitate the investigation of incidents. In order to interpret the data that has been recorded in the FDR the data has to be visualized in some way. This can be done with software on a computer or with hardware that is specific for the model of aircraft that the data originates from.The aim of this project is to visualize data for six parameters from the FDR of Saab 2000 in an avionics rig. The avionics rig resembles the cockpit of Saab 2000 and the displays in it are identical to the ones found in the plane. All six parameters are shown on the same display.Due to safety regulation vital systems in aircraft are doubled, with one system on the left side and one on the right.

The report describes a measuring method for analysis of energy consumption measurement in microwave ovens. Concurrently that the awareness of the environment evolves the demands are growing for more power saving products. This is also counting within the Home Appliance business, which is Whirlpools business area. Whirlpool is therefore interested of launching microwave ovens with documented low power consumption. To be able to implement this, both asserted measuring equipment, that fulfils all demands, and a standard procedure is required.

This report deals with RFID systems and how to detect nearby tags with the Mifare standard using only a microcontroller and an antenna circuit.The aim was to investigate whether there was any possibility to continuously search for a nearby tag for a system operated with batteries without compromising   the lifespan of the battery. At this time the system would take too long time to wake up and look for a tag to give a satisfactory battery lifespan, which should be done a couple of times every second.The report has two issues, namely:Is it possible to direct the microprocessor to detect and identify a nearby tag after the Mifare standard?What hardware is required for this to be possible?As the research method to provide answers to the above questions an action research was used. This approach has meant that the group worked on information retrieval, examined existing solutions, tested their own solutions and documented the results.The group examined an existing solution that can search for nearby tags with minimal energy consumption. An antenna circuit was built that was connected to the processor.

This report presents a method for modelling a computer system from a security perspective. The questions that are going to be treated are:? What defines a secure system and how does the company relate to these factors?? What are the threats today based on hardware/software, human factors and company routines/policies?? What measures should be taken for the organisation to reach a higher level of security for their systems?? How do we develop a method for classification of security and what components should it contain?? What changes are reasonable and necessary with the respect to the company?s resources?The report has been done through interviews and analysis of existing systems on Fla?kt Woods AB. From analysis of material, the aspects judged relevant to the subject and to the company?s needs, have been compiled to a document.

This master?s thesis was performed at PartnerTech AB in Åtvidaberg. It addresses the problem of managing test results obtained from testing electronics manufactured by PartnerTech. PartnerTech has developed a test system, called Tor, which performs tests on manufactured boards and stores the test results in files. The Tor system consists of both hardware and software part, where the software runs on an ordinary PC with MS DOS/Windows 2000.

The high level of energy consumption that the industrialised countries have reached and thepollution that this brings has long been a cause for analysis and debate, development and usageof so called renewable energy sources is therefore more important than ever. The energy in theelectromagnetic radiation from the sun is an interesting alternative. One way of harvesting thisenergy is by using solar cells, devices that generate DC current when exposed to electromagneticradiation.The goal of this master?s thesis was to design a solar powered power supply to Syntronic AB?sMidrange platform. The envisioned application is a stand-alone distributed embedded system,for example a node-based temperature monitoring system.

The problem of separating a non-rectangular foreground image from a background image is a classical problem in image processing and analysis, known as matting or keying. A common example is a film frame where an actor is extracted from the background to later be placed on a different background. Compositing of these objects against a new background is one of the most common operations in the creation of visual effects. When the original background is of non-constant color the matting becomes an under determined problem, for which a unique solution cannot be found. This thesis describes a framework for computing mattes from images with backgrounds of non-constant color, using Bayesian statistics.

Today multi-touch technology is the basis for many new techniques designed to improve interactions with computers and mobile devices. It seems that multi-touch screen interface makes the user handling very natural in the sense that there is no need for a manual in how to interact with the object on the screen. The aim with this paper is to establish a fundamental set of design principles intended specifically for large multi-touch interfaces. To reach this goal we have implemented a couple of sub-goals beforehand: It was essential that we acquired a good understanding of the current state of the multi-touch interface and the different implementations that exist today. To make this possible we constructed a multi-touch display, "Rosie". Knowing how the hardware is produced today will help us understand the limitations and also the possibilities of the design implementations today and in the future. We also needed to devise a sound interaction design process that conveys the modern designers work.

Today multi-touch technology is the basis for many new techniques designed to improve interactions with computers and mobile devices. It seems that multi-touch screen interface makes the user handling very natural in the sense that there is no need for a manual in how to interact with the object on the screen. The aim with this paper is to establish a fundamental set of design principles intended specifically for large multi-touch interfaces. To reach this goal we have implemented a couple of sub-goals beforehand: It was essential that we acquired a good understanding of the current state of the multi-touch interface and the different implementations that exist today. To make this possible we constructed a multi-touch display, "Rosie". Knowing how the hardware is produced today will help us understand the limitations and also the possibilities of the design implementations today and in the future. We also needed to devise a sound interaction design process that conveys the modern designers work.

Abstract In the contemporary world of information technology you find a multitude of applications and systems covering a broad spectrum of areas of need in different companies. One effect of this multitude of programs is the difficulty to make them exchange information with each other or to collaborate, since they are developed by different programming languages for different platforms, with different standards and different data formats. Our aim with this work is to describe how it is possible to tie these programs together to make them actually communicate with each other in order to exchange information, share their native methods and also to become a part of the overall business processes. In this integration task you will, among other things, find different levels of application integration such as data level, method level, application interface level and user interface level integration. Application integration also involves hardware components, called middleware, that facilitate the physical connection between applications.

I denna rapport beskrivs en utvecklad utbildningssimulator o?ver spa?rfordon och dess del- komponenter pa? ja?rnva?gen. Simulatorn a?r en ha?rdvarubaserad prototyp o?ver ett do?rrsystem pa? spa?rfordon. Prototypen ska anva?ndas av systemspecialister och tekniker inom ja?rnva?gs- branschen.

Modern agriculture equipment are more computer based today, and many equipments use a terminal in the tractor where the driver have the opportunity to make adjustments to the equipment. This is the reason why ISO developed a new standard called ISOBUS. It is a communication standard based on CAN specially adapted for griculture equipments. The purpose of the standard is that it should be ossible to equip a tractor with a standard terminal called Virtual Terminal that can be used to control the equipment. The use of the terminal should be independent of the manufacturer of the tractor as well as of the equipment.The purpose of this report is to ?nd a solution of how to use CC Systems on-board computer, CCP XS, as a Virtual Terminal.

This thesis is about making a support for barcode readers and RFID readers on a computermounted in heavy vehicles. The computer has several applications designed for heavyvehicles such as an order handling application. The goal was to suggest an architecture toimplement a support for the readers. The architecture should be independent of whichmanufacturer who has made the reader hardware that was connected to the computer.At first a theoretically study was made around RFID technology and standards for thetransport and supply sector. Then the architecture was developed and a demo implementationwas made.The conclusion of this thesis is to implement support for barcode readers with a wedgeapplication.

The aim of this thesis in Archival Science was to explore the concept of electronic archives and the challenges that might be encountered when attempting to move archives into a new digital age, as well as having a closer look at the term e-archive itself. Another aim was to explore how the OAIS reference model works in practice.To explore these questions I decided to do a case study on E-Arkiv Stockholm, a functioning e-archive. I decided to do a study on several documents that were created throughout the project, these included documents related to the planning of the archive, as well as the final report. My reason for this method was that these docu-ments came straight from reality and would give a clear and unbiased view of the project and it?s many aspects.Examination of the documents showed that the OAIS reference model and its concepts had been the foun-dation of much of the planning.

Grid codes are becoming more demanding on power generating units due to the factthat the complexity of the power grid is increasing. The penetration of wind powerhas grown over the last years and it is clear that wind farms need to be addressedwith the same type of grid codes as conventional generation units. There is howeveran undeniable difference between the technology in conventional synchronousgeneration units, and the asynchronous generation units in wind farms.This thesis has reviewed the current grid code in Sweden and compared it to the newcode proposed by ENTSO-E, ?the Requirements for Generators?, in the aspect ofwind farms with an installed power of 30 MW or more. The comparison has beencomplemented by an analysis of how wind farms of two different technologies(Doubly fed induction generators and full power converters) can meet therequirements and technical proposals have been given on how to be able to meetcompliance with the new grid codes.The Requirements for Generators contains many non-exhaustive and optionalrequirements, because of this it has been difficult to, at this stage, exactly point outthe technical impact on the grid connection of future wind farms in Sweden.