This study was carried out in Jordan with the purpose to investigate the bacterial microflora of egg shells from cage systems and from deep litter floor systems. Another aim wasto get a general impression of the hygiene, at farm level, of egg production in Jordan andthe factors affecting it.Eggs from two cage systems and three floor systems were analyzed, regarding bacterialcontamination of the egg shells. Egg samples were taken from the storage room, the eggcradle in the cage system and from the nest and floor in the floor system. To get a generalimpression of the hygiene at the farms, swab tests and air tests were performed. Swab testswere performed with a sterile cotton swab at the same units as the eggs were sampled andair tests were performed by opening petri dishes where the hens were staying.

The defence unit´s archive stretches over a time limit between the middle of 1971 to the end of 1987. The records the archive mainly contains are concerning the civil defence, inspection and construction of shelters, war- and crisis planning. The majority of the records are registered record, as often is the case with an authority?s archives. The main problems that occurred concerned what should or shouldn´t be public, the principle of provenance and what to prioritize; finish the project before deadline or make sure the records are prepared for a storage that ideally should last for several lifetimes..

This report is about how to decide which method is the most suitable as floor covering at projectKlammerdamm in the centre of Halmstad. The covering has to be fire resistant and soundproof inorder to protect the wood structure and stop noise from traveling between apartments. There aretwo possibilities either traditional gypsum board or gypsum-based self leveling underlayment.The roads around the construction site are narrow. A regular twenty-five meter long truck has nopossibility to reach the site. The construction site is small and the storage area is limited.

Sverige har en hög andel installerade bergvärmepumpar, som är en typ av vätska-vatten värmepump. Ett problem som finns för befintliga bergvärmesystem är att berget med tiden kyls ned då returslangen till borrhålet konstant levererar kyla till berget. Till följd av detta mister systemet en betydande del av sin verkningsgrad samtidigt som det i extrema fall kan leda till permanent isbildning i borrhålet.Ett sätt att motverka detta problem är att tillämpa termisk energilagring i bergvärmesystemets borrhål. Den internationella benämningen för denna teknik är ?Borehole Thermal Energy Storage, BTES?.Rapporten har behandlat en friliggande enplansvilla med ett befintligt bergvärmesystem som tillämpar termisk energilagring i bergvärmesystemets borrhål med solvärme.

The purpose of this thesis project was to study how different companies are working with LastTime Buy and through that study propose improved ways of working with this for Scania CVAB. The project aimed at studying the work processes from three different perspectives:decision models, quality aspects and liability aspects between companies.To study this, qualitative interviews with one or several representatives from differentcompanies that are affected by or involved in Last Time Buy were used. Representatives wereselected partly from Original Equipment Manufacturers, suppliers, component manufacturersand companies offering third part solutions for Last Time Buy. The companies also reflecteddifferent industries. The interviews aimed to create an understanding for the methods used atthe different companies but also the ways of thinking and the knowledge behind the choice ofthese working methods.The analysis shows that the Original Equipment Manufacturers used very similar decisionmodels for Last Time Buy, but that external factors or the company strategy made them reachdifferent results.

The subject of this bachelors degree project is an interior layout for road ambulances.Landstinget Västernorrland (LVN) wanted a layout concept that would be used to com- municate their design intentions to the ambulance producers during their purchase process.Designing ambulance interiors is an extremely complex process since there so many fac- tors to take into consideration. It ?s not just about taking the equipment and place it where there is space left in the cabin. You have to start with the user in focus and the tasks that are to be performed in the ambulance environment.It ishard to find design solutions that will fit 100% of the ambulance personnel?s working routines for 100% of the tasks.

The kitchen is one of the most important rooms in our homes. It is a place for social engagements, meetings between people and activity. How the kitchen looks today is a concept sprung from the Swedish kitchen standard of 1952. Eventhou this standard no longer exists it is a model of how kitchens are designed today. The kitchens most often sold today come from one of four major kitchen manufacturers in Sweden.My thesis investiges an alternative kitchen concept.

Arbetstillfredsställelse kan definieras som ?en positiv (eller negativ) evaluerande värdering av arbetet eller arbetssituationen? (Kaufmann, G.,  & Kaufmann, A.  2005 s. 269). Denna studie fokuserar på delaktighet,  arbetsinriktning, fysiska betingelser, lön, ledarskap och sociala betingelser som delar i arbetstillfredsställelse. Syftet med studien var att undersöka hur extraarbetande högskolestudenter på lager uppfattade sin arbetstillfredsställelse, därför intervjuades nio studenter varav tre kvinnor i åldern 21-33.

Fuel wood is currently the third largest assortment from the forest in Sweden after pulpwood and lumber. Branches and tops i.e. logging residues are one of the assortments of fuel wood which is a common by-product after harvesting nowadays. The way to utilize, disintegrate and transport the logging residues varies between northern and southern Sweden. Branches and tops are collected throughout the year at appropriate stands, but are consumed mainly wintertime.

The goal of this paper is to provide a model for a sustainable electricity system to an island, in the Pacific Ocean near the equator.The method which has been used is to model supply and demand of electricity in the computer program Stella, through the creation of a dynamic system that balances them against each other. The result from the model will then be used to calculate the electricity price per kWh for the island.The result of the work is that electricity from solar energy is comparable with electricity produced from oil, if the oil pays for all its external costs, and the potential for pumped hydro storage plants is located. It also requires that consumers of electricity can be their own producers to avoid the expenditure of tax and reducing the cost of distribution. But since oil is a finite resource and has had a rising cost in recent years, while solar energy has had a declining cost, perhaps this will be a more competitive solution in the future.

The sludgebark and to a certain extent the bark were until a decade ago waste products without any economic value that were thrown away. A number of environmental laws and increcing energy prices have improved the prerequisites for increasing the use of these materials. At Seskarö sawmill they burn the sludgebark and a great deal of the bark in the sawmill furnace. The sludgebark has a number of disadvantages compared to bark during burning. The sludgebark is often wet which means the energy net from burning often gets low.

Total mixed rations (TMR) and TMR complemented with individual grain feeding to dairy cows are a growing practice in Sweden. This is because the heard sizes of the farms are increasing. Some farmers and farm advisors in Sweden have great knowledge and practical experience of working with TMR. In the same time there are many advisors that do not know how to handle TMR and farms that have a group based feeding of their animals. In this MSc thesis, the knowledge of farmers that use TMR and advisors with lots of experience of TMR are gathered, with the aim to create a guide book for advisors that are about to start or just have started working with TMR.

This report is a study made at Pallco AB. Pallco is a subcontractor that is specialized on steel and aluminium components.The aim of the report is to show an improvement proposal that leads to a reduction of the storage and improve the flow through the production of one item that is a part of a product that Pallco manufactures.With the increasing competition from other countries who can manufacture with lower costs must Swedish companies try to make theirs manufacturing as efficient as possible and remove all waste. By using the tools of Lean Production it is possible to reduce the costs and increase the efficiency.The method we used is value stream mapping. A map of the present condition has been made and then different improvement proposal were discussed. A map of a future condition has also been designed..

The aim with this study was to investigate the effects a change of manufacturing process would have on the mechanical properties of drill bits made of a WC/Co composite used for stone cutting. The method used today is sintering, where the material is heated in a conventional sintering oven. The other method was microwave sintering, where the material is heated by radiation in the microwave region. Also an investigation of the manufacturing cost were made.The main difference between the two heating methods is that the conventional way is a rather slow process and the microwave method is very fast. The material is also heated homogeniously in the method with mirowaves, aposed to the case with the conventional sintering where the material is heated from the outside in.This makes the material harder and more wear resistent.

During the summer of 2005 a number of steer producers in Skåne, Sweden, found that their animals graded less favourable according to the EUROP carcass grading system when slaughtered, than ordinary. The aim with this project was to determine factors that affects the production result in steer production and to find the reason to the lower classification. The project was initiated by Anita Persson, LRF, Skåne and was preformed with supervision from Ingemar Olsson, SLU, and Jens Fjelkner, Skånesemin. Ten producers of dairy steers located in Skåne was chosen for this study. The producers were interviewed to collect information about their steer production with respect to their planning and results.