With the elevated oil prices of today it is necessary to look for other heating alternatives. If the oil price continues to develop in the same way it has done the last years it will soon be impossible for many producing garden companies to survive. The purpose of this diploma work is to compare three different fuel options in order to find the most economic one considering the conditions of Katrinebergs Handelsträdgård AB. In relation to oil it is profitable to change to any of the three alternatives: wood chips, wood pellets and grain. The most profitable option is to change to wood chips. This alternative has a payoff time less than three years and after that the annual saving compared to the oil is relatively high. The annual cost is 65 % of the cost of the oil alternative.

The present study examines in a longitudinal perspective earlyspeech development in children with partial isolated cleft palate comparedwith children with unilateral cleft lip and palate and children with typicaldevelopment. The groups were compared regarding consonant production at18 months, 3 and 5 years. The results showed that speech development inchildren with isolated cleft palate did not differ significantly from that inchildren with typical development except for production of oral fricatives at18 months. The children with unilateral cleft lip and palate had significantlymore speech deviations at all ages. The children in both cleft palate groupshad significantly higher hearing thresholds at all ages.

This diploma work covers an investigation over the heat - and hot water systems of thetenant-owner's association, Bogården. The heat - and hot water needs of Bogården aresatisfied by both district heating as well as three heat pumps. Implemented investigationshows that the heat pumps are not used in a profitable way. Apart from that, the reservepossibilities are small. There is also a risk of the growth of Legionella bacterium in thehot water system.Since the heat pumps are already installed, HSB-Gävleborg (responsible for Bogården)has a wish to investigate possible proposed actions for optimization of existing plant.After completed investigation, a new proposed action is presented.

A totally mixed ration (TMR) is a mixture of all the necessary feed components for the cow. She will eat the exact same feed in every bite which will make the rumen pH more stable and always supply her with a constant proportion between roughage and concentrate. This will make it possible for the cow to eat more dry matter (DM) a day because the fibre requirements are fulfilled. If a part of the concentrate is given separated from the mixture it is called partly mixed rations (PMR) and is almost always used when using an automatic milking system (AMS). When using TMR and PMR it is important to have a high hygiene, be accurate when mixing the feed and to look after cows in a good and strict way. The aim of this study was to document different farms with PMR in an AMS to see which routines they have and how they are managing their production.

Our project is divided into two parts, one production and written report. The main focus was the production part, were we used PHP to create simple solution for handling SMS and MMS with direct communication with the mobile operator server. We communicate with sockets and can handle CIMD2 and MM7 protocol. To get our components easy to use we have created two classes to handle SMS and MMS. To demonstrate our technical platform we created a website were you can create an account.

This study examines how farmers certified by KRAV face proposed regulations on organic soils put forward by KRAV economic association among others, and how they are affected economically. These soils are, from an environmental perspective, interesting as a target for production regulations as they cause greenhouse gas emissions through decomposition of organic material when cultivated. The regulations advocate that organic soils should be grown with pasture where soil cultivation is only allowed every fith year which implies that possible adjustments of cultivation have to be made in order to fulfill the regualtions. Collection of data have been made through a questionnaire sent out to 574 farmers certified by KRAV. The answers have been analysed using a decision making model and statistical findings suggest that proportion of organic soils, type of production, economic conditions and farmers? goals and values have an influence on whether the regulations and potential cultivation adjustments have been considered or not.

In Sweden there are 354 000 private individuals owning forest. Of these forest owners there are at least two thirds that are self-employed, which means that about 215 000 forest owners conduct some kind of work in their own forest. Those numbers do not refer to firewood production, but every year 7.3 million piled cubic meters of firewood are used for heating Swedish households. This implies that many households are also producing firewood. The objective of this study was to assess and analyse the small-scale firewood production in the Umeå-region in terms of persons engaged in the work, equipment used, produced volumes and share of forest-owning households involved in these activities. According to results from a questionnaire, the average firewood producing person is a man between 40-60 years old.

The aim of this report is to increase the knowledge and understanding of the problems within the production at AQ Enclosure systems, and thereby achieve a more stable flow throughout the whole process, a better working environment and better competition advantages. The internal flow along with the external cooperation is very important for the company, because it views flexibility and short leadtime as it is the most important competitive means. The part of AQ production that?s been investigated is the manufacturing of ATM-machines, where the costumer is Banqit. This company is a rater small company with about 4 % of the world market of ATM-machines.In order to achieve the aim of the report extensive interviews have been carried out with employees at AQ.

Photovoltaic Systems in Sweden has longbeen heavily dependent on subsidies and grants to bring in a profit for the investor. Production of excess electricity is a major reason for this as the compensation for excess electricity today is low. However, there are businesses that have an electricityneed that are particularly suitable for solar electricity. These businesses have an electricity demand when the sun shines the brightest and if the Photovoltaic System is properly scaled, the excess electricity can be minimized. A golf club is that kind of a business and this thesis aims to examinate the solar power potential for golf businesses in Sweden.Nine golf clubs was selected from different locations in Sweden.

This paper is a study of documentary film production with focus on the filmmakers choice and usage of sound equipment. Using professional articles and literature have first of all helped us determine a standard for the conventional use of sound equipment in documentary film. Afterwards, by analyzing our own interviews we?ve received answers on how filmmakers relate to the conventional usage and why they select equipment as they do. Thereafter, we describe a technical method which helps a filmmaker to be able to record sound for documentary film on his/her own, using simple measures without reducing quality.

In this degree project I write about how the farmers who grows carrots in Sweden get influenced by different rules, investments and demands. The Swedish agriculture are heading towards a harder time, and then you have to find new things to do. Now its hardly no profit to grow grain so you have find other crops. This paper is not a comparison between the contract cultivation to Findus and the cultivation where the farmer maked his products by a own company on the farm. If you have a small processing company on the farm, you have to increase the standard with different certificate. The farmer binds a lot of capital in machines, both field and in the process.

Ethiopia is the country with most livestock per capita on the continent of Africa. There are 34.5 million cattle that are used for drought, meat- and milkproduction and 85% of the population rely on agriculture for their survival in some way. Milk is produced in four main systems, through pastoralism in the lowlands, in mixed crop-livestock systems in the highlands, in and near big cities with only one or two cows, and in intensive farming systems. There are 17 cattle breeds in Ethiopia and some of them are more suitable for milk production than others. Several environmental and economic problems arise from livestock holding in the country, for example overgrazing, low production due to feed shortage, low quality of the avaible feed and non-existing breeding programs.

This study is about to see whether the two models representing the strategies of lean production is to use and apply in different companies. The models are structured in two different ways in which one of them is checking the softer elements of lean production in the form of leadership and strategies. This model is called Lesat and is based on interviewquestions. The second model, called "learning to see" is about identifying flows. This, together shall then give an idea of how mature companies are when it comes to a whole in the concept of lean production, and susceptibility to use these models to their respective companies. The study is conducted in two companies, SKF couplings systems and AQ parkoprint.

Viewer interaction is a common part of live broadcasts on the web and enables production and viewer to communicate with each other. The possibilities in viewer interaction make it easier for productions to create viewer engagement by involving them in the live broadcast through chats and social media. In creating a bond between production and viewer the interaction must be carefully managed to suit both the shows and the viewer?s needs.  A qualitative study has been used to analyze the viewer interaction in two Swedish live broadcasts on the web.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.