Hans Olof Alsén, born 16 august 1926, is a Swedish Social Democrat politician who served as the County Governor of Uppsala from 1986 to 1992. During the 1960s, -70s and -80s he had several political commissions including Member of Parliament and government Undersecretary. In addition he had numerous Board of Directors assignments in different business corporations as well as in non commercial associations both prior to, during and after the County Governor period.This paper describes the organizing and cataloguing of Hans Alsén's personal archives. The documents at hand were deposited at the regional state archives (Landsarkivet) in Uppsala in 2008 and 2009 by Alsén himself. The documents almost exclusively cover the County Governor years 1986-1992.

Since the 1970`s the Non Governmental Organisations, NGO:s, have taken an increasing responsibility in the development cooperation work. Apart from an increase in resources delivered through the NGO:s it is also obvious in various official documents that the idea of NGO:s in regards to; reaching and involving poor people in the work and as capable of delivering aid resources to a low cost, is very widely spread and commonly accepted among political decision makers and aid agencies. In addition it?s very seldom that those positive statements about the NGO:s abilities, are backed by any kind of scientific study. This study argues that the ascribed abilities are more the rhetoric of a political idea than an empirical reality.

Shock absorber units play a key role in establishing the driving dynamics and performance of automobiles. Öhlins Racing has manufactured high-tech automotive shock absorbers for over 30 years. Öhlins Racing?s advanced technology has contributed to over 200 world championships in automobile racing. Öhlin?s manufacturing process has long utilized automated fluid filling equipment during the final shock absorber unit assembly stage. The filling process consists of vacuum pumping the shock absorber unit and subsequent transfer of fluid. Vacuum pumping is necessary to remove residual air from the shock absorber unit prior to initiating the liquid filling stage. The presence of undesirable gases drastically compromises the performance of a shock absorber. The filling degree, defined as the final ratio of air to oil, is determined by the specific filling protocol as well as the specific equipment utilized.The current investigation aims to develop a viable technique to accurately determine residual air content in shock absorber units. If the filling degree can be appropriately quantified for a specific manufacturing process, then the air/oil ratio may be quantitatively related to shock absorber performance. The utilized measurement method must be completely integrated into the manufacturing process to guarantee shock absorber performance specifications according to the manufacturer?s standards. By utilizing the measurement method developed in this work, the manufacturing process, manufacturing equipment and product specifications can all be tailored to provide improved filling conditions.The developed measurement method provides accurate quantification of the filling degree under a wide range of processing conditions. The method establishes the relative quantity of air in the shock absorber unit by performing in-situ compressibility tests. The fill ratio can be controlled and varied by manipulating the vacuum pressure exerted during the filling process. Performance tests, however, indicate no correlation between filling degree and unit performance..

On three occasions, in 1973, 1993 and 2005, Swedish parliament and government has resolved to integrate the, previously independent, foreign offices beloning to the Swedish International Development Cooperation Agency (Sida) with the Swedish embassies. The implemenation of the integrationreform has however been a lengthy process. This thesis adresses two main issues: how has the integrationreform been able to remain a viable recipe for organizational change over time and why has the integrationprocess taken so long? Lastly I assess the possibility for effective implementation following the decision 2005.Based on New Institutionalism I conducted an historical analysis of the integrationprocess to explore the conditions for reform. My results indicate that the integrationreform primarly suited the interests of the Ministry for Foreign Affairs, making the Foreign Serivce more effective and clarifying the Ministry's responsibilty for Swedish development cooperation policy.

Purpose/Aim: The purpose of this thesis is to define and analyse how Swedish record companies work with digital musical content distributors. A more narrow aim is to show how the record companies and with the digital musical content distributors iTunes Music Store and Spotify create incentives for consumer?s to use legal digital music channels through the Internet. To further circle the core of the problem following questions have been asked: How does the record companies provide iTunes Music Store and Spotify with digital content and what is done by the record companies to retain control over the material? How do the record companies view digital musical sales and what incentives are given to consumers to buy music digitally? Finally, What position of power do iTunes Music Store and Spotify have on the digital content arena?Material/Method: The data collected for this thesis is retrieved through personal interviews with representatives from three of the four major record companies Universal Music, Warner Music and EMI and their Swedish branches.Main results: The consumer?s access to digital content through iTunes Music Store and Spotify is of the utmost importance and is a prerequisite.

The right to freedom of conscience is protected by international conventions and declarations of human rights that have been ratified by Sweden. Nationally, the issue of health professionals? right to freedom of conscience in the abortion care is not resolved by public inquiry. This has led to that Sweden has been notified to the European Committee of Social Rights on the grounds that the country is considered to be violating the Council of  Europe Resolution 1763 and that the proper question to be determined by regulations of the interests that are balanced, based on their legal value in relation to each other. Freedoms, rights and obligations conflict with each other.

In Based upon disciplinary foundation... ? A study on teachers? prerequisite for continuing pro- fessional development (CPD) I have examined the prerequisites that teachers in Nacka have for CPD, due to the new school law that states that all teaching must be based upon disciplinary foundation and proven experience. According to a recently published governmental report, as well as international research, not only structural aspects like time and financial compensation are crucial to whether teachers continue their development. Encouragement from the principal and colleagues are also a contributing factor; and not to mention those factors combined.There is a world wide shared consensus among educational researchers claiming that one very important piece in creating a successful school is having a well-educated and updated staff.

INGEN LAG ? STRAFF? ABSTRACTThe thesis deals with a gap in the Swedish legislation concerning the criminal responsibility under which military personnel act in international peace operations. According to international treaties called Status of Forces Agreements, military personnel operating abroad within the territory of other states are exempted from the criminal law of the host states. In return, their home states apply its national criminal law upon the personnel instead. Thus, Swedish criminal law is applied in relation to actions taken by Swedish military forces in international operations.

In metropolitan areas where the exploitation pressure increases, also the importance to point out nature areas grows, both for the sake of outdoor life and for biodiversity conservation. Since nature conservancy and spatial planning constitute two different parts of the municipalities land use control, a case study has been carried out in two municipalities in the Stockholm region, Huddinge and Järfälla. Both these municipalities have protected about one third of their land and today there are plans to repeal parts of the reserves to enable exploitation. This thesis shows ? from the theoretical concept of sustainable development ? officials, politicians and non-governmental organizations perspectives on questions concerning land use together with the work with nature reserves and repeals.

If one looks at physical planning in Sweden today one can see that while talking about densification of existing development, reduced emissions and careful use of important land, urban sprawl is a fact with development of sheer residential districts in the urban edges and shopping malls in each and every municipality. As sustainable development is an essential goal for physical planning to strive towards, it is worth questioning if the direction of today?s planning will lead to the goal. A sustainable development can be seen as an obvious to goal aim at. In reality the aim means a hard and complex work.

The agriculture of today is getting larger and larger and it demands more efficient machines to handle these larger units. But all farmers don?t have the opportunities or don?t want to expand. What should they do if they want to remain on the farm? An alternative is to start a farm shop.

In the last years people has become more aware of issues regarding corporate social responsibility. This has led to a more thorough control of big multinational companies, which are often held account of violating social, ethical and environmental values. The term most often used for this is corporate social responsibility (CSR). H&M is a Swedish multinational company and the concept of H&M is fashion to a low price. The material most often used in producing clothes is cotton.

The situation at Plastal AB is following; the plant in Simrishamn has not capacity enough but the plant in Kristinehamn has unused capacity. My task with this master thesis is to build a logistic flow between this two plants, optimize purchase quantities and ensure delivery safety.The production of the Intermediate Section (LS) will be divided between the plants. The LS will be produced in the following way; the injection moulding process will be done in Simrishamn and the assembling and lacquering processes in Kristinehamn, The reason to divide the production is to ensure delivery safety. Plastal AB can not move the whole production of the l.S because the two plants have different processes (moulding res. injection moulding).When the 1.5 has been transported to Kristinehamn following moments are included in this order; lacquering, welding and assembling.

Through an internship at a nonprofit organization called ATSUB[1], specialized at giving support to non-offending parents to sexually abused children, one of the authors to this study found that there was a lack of care for the parents by governmental operations. While studying the previous research we found a great deficiency when it came to non-offending parents and far most about non-offending fathers. We found studies proving that the child?s non-offending parents are the best support for the child during their healing process. Research also shows that parents must be able to get good support and treatment during their crisis for the parents to be able to support the child, since they?re also in great despair over their child being sexually abused.

The aim of this study was to investigate how the process of implementing a quality management system for food safety was handled in four different food producing companies in Sweden. The aim was also to analyze what difficulties the companies face and the possibilities that arise when certified. Furthermore, the reason for implementation was discussed as well as the main expectations on the certificate. Implementing a quality management system is a good way of ensuring the quality and hygiene of the food production and it also increases the traceability of food products through the whole food chain. A food safety standard provides a method of preventing problems and crisis and it can also help to handle requirements from authorities, the market and others.