In society and school today there is a major focus on assessment, and this can for example be seen in an increased research on assessment over the last ten years. But one research topic still quite unexplored is how students perceive assessment. The main purpose with this study is to explore students? experiences of assessment, how assessment interferes with their volition and if the extent of the impact on the motivation varies depending on how the assessment is performed. In order to answer these questions a quantitative investigation was performed at first. 83 students answered a questionnaire about what kind of assessment they experience in school, if they receive feedback, what is important for being successful in school, if they know on what grounds they are assessed, what impact failure and/or success has on their motivation, if they are stressed by school etc.

Product development is a risky business; many products never yield profit, but it is also ne-cessary for a company?s survival in a competitive business where the costumers change their requests constantly. Consumer-led product development is developed from the wish to fill the consumer?s needs and expectations and thereby be more likely to succeed. Lindell?s Gårdsslakteri AB is a local slaughter and meat processor in Västergötland.

This thesis has been performed at Scania CV AB Technical Centre in Södertälje and its aim hasbeen to study the causes and effects of deformations in the interface between the rear axlehousing ADA1100 and the central gear house R780 during operation. Design changes that wouldincrease the sealing capability of the studied interface are also suggested. Finite element (FE)and CAD software have been the primary tools in this study.Finite element (FE) simulations are used in the industry to predict and develop engineeringdesigns. The main motive for FE simulations has traditionally been to identify weak spots in thedesign, regarding high tensions and large deformations.The FE model is an aggregation of submodels and interface models that represents the rear axlehousing, suspension, central gear, central gear housing, wheels, bolts and weldings, and theirinteractions. The submodels have different material properties and they are connected withcontact interface models.Boundary conditions are defined on the bushings in front of the rear axle and on the air bellowsbehind the rear axle.

Migration and giving birth are crucial decisions for animals during their life cycle, which may have lasting consequences on their population demography and fitness. Migration can entail a variety of possible effects for an individual, such as access to high quality food and reduced risk for predation. The moose (Alces alces) in northern Sweden is partially migratory and moose females are known to give birth to one or two calves. The synchrony between time of calving and timing of migration has not been compared before, especially in terms of energy maximizing and time minimizing perspectives, which may provide vital cues for fitness benefits of migration. I investigated effect of timing of birth and individual life history on distance, timing, stopovers and duration of 190 individually marked female moose that have been tracked for multiple years in ten different areas in northern Sweden.

Background and problem discussion: Sustainability reporting has recently risen in importance and a rising number of companies choose to issue voluntary stand-alone sustainability reports. Their non-regulated nature increases the opportunity for management to angle the information in these disclosures to their own advantage. Lately the focus has shifted from examining what kind of information is provided in environmental disclosures, to analyzing how the information is presented.Purpose: The purpose is to examine if managers in the energy sector use optimistic tone when issuing sustainability reports. The aim is to find out if the tone applied in environmental disclosures is in congruence with either the environmental or economic performance or if an excessively positive tone is being used to mislead readers.Limitations: This study is limited to information found in environmental disclosures from private companies in the energy sector, issued in 2012 or 2013. Environmental performance is defined as the amount of CO2e emissions and economic performance refers to annual company revenues.Methodology: The quantification of optimistic tone is conducted using a content analysis, relying on a pre-specified wordlist and a pilot study.

During the last years, meticillin resistant Staphylococcus pseudintermedius (MRSP) have caused an increasing number of infections in Swedish dogs. MRSP is resistant against a majority of the antimicrobials available for dogs in Sweden, making it difficult to treat the infection. Our knowledge of the bacterium is limited, making it hard to handle infected dogs in a proper way. The aim of this study was to investigate for how long time dogs, who have an infection caused by MRSP, become carriers of the bacterium. Other factors like treatment with antimicrobials, the correlation between clinical symptoms and carriage, common diagnoses and institutionalization where also looked upon.

The Homogeneous Charge Compression Ignition (HCCI) engine is promising in terms of lowNOx, low particulates and high efficiency. Due to its homogeneous charge, where thecombustion starts almost simultaneously from a number of points in the combustion chamber,only lean mixtures are possible to burn because of the resulting rapid combustion, which is muchfaster than the combustion in an SI-engine or a diesel engine. When richer mixtures are used thecombustion will start earlier and also be more violent.To phase the combustion later and lower the combustion speed, external cooled EGR can beused. The EGR-system used in this thesis uses a divided exhaust channel where one channel andits corresponding valve are used only for transporting EGR back to the intake system.Consequently the EGR-valve is connected to the intake pressure. This system is called Direct-EGR (D-EGR).Engine tests verified that the CA50 indeed is phased later when cooled EGR is used.

Ordet ?design? används ofta för att beskriva hur en produkt ser ut, vilket gör att är lätt att förbise andra viktiga parametrar, exempelvis den låter, luktar eller känns. Inom taktliiteten studeras det sistnämna, nämligen hur en produkt känns i handen eller mot huden. Detta är subjektivt, eftersom alla människor har sin egen uppfattning. Därför kan information om detta enbart tas fram experimentellt genom undersökningar och mätningar.

Studies show that some pupils with ASD (autism spectrum disorder) can have difficulties in understanding written texts. The present study seeks to examine whether pupils with ASD differ in their reading comprehension of a factual text and a literary text. Another aim of the study is to obtain a picture of the reading habits of high school pupils with ASD, what reading strategies they use, and how they work with texts in Swedish lessons in school.The study uses texts from PISA surveys from 2009 and 2000. The factual text Varmluftsballongen (The Hot-air Balloon) was taken from the try-out for the 2009 survey and the literary text Gåvan (The Gift) was taken from the 2000 PISA survey. To gain some idea of the pupils? reading comprehension of the texts, the present study used the tasks accompanying the texts, with certain changes in the questions about the text on the hot-air balloon.

ABSTRACT Background: Health and ill-health are multifaceted concepts. Previous research has shown that physical activity and the level of cardio respiratory are important parts of leading a healthy lifestyle. Possibly, it?s so important that the Occupational Health Service should focus even more on this.Aim: The aim was to investigate if there was a relationship between the level of cardio respiratory fitness and self-rated health, and between the level of cardio respiratory fitness and physical and mental ill-health.Method: The study was conducted using a quantitative method in the form of a cross sectional study. Data was collected from an Occupational Health Service, containing answers to a questionnaire on work environment and health and test values ??from completed cycle fitness tests.

Due to recent legal enactments regarding carbon dioxide emissions, the car industry is facing higher demands. An effective way of reducing these emissions is to minimize the weight of the vehicle. This thesis constitutes a feasibility study on whether or not it is applicable for the car industry to utilize an inner floor structure comprising composite materials. The principal was the projectSåNätt, in which the main participant was Volvo Cars Corp. In consultation with a reference group, consisting of delegates from the industry and KTH, a specification of requirements was produced.

In order to drive innovation and growth in a nation is it important to have innovative companies. Many of those innovative companies are smaller companies, which are in need of capital injections for expansion of its operations or to be able to produce a commercial product. In many cases the banks will not lend because they believe there is too great a risk that they will not get their money back. It is in this situation venture capital becomes interesting. Venture capitalists? see the potential the product and/or entrepreneur possesses and are therefore more willing to take the risk in investing in these companies.

The aim of this thesis is to improve the control of urea injection at the combined power and heating plant Framtidens Gärstad (FTG). Tekniska Verken i Linköping AB is the owner of the plant.The FTG plant consists of a boiler where garbage combustion is done. From the combustion nitrogen oxides are emitted. These nitrogen oxides are hazardous to the environment. To reduce the nitrogen oxides, injection of urea into the boiler is used.

This study is a part of a Swedish research and development project that is about heat-treated wood and is led by the Swedish University of Agricultural Sciences and Luleå University of Technology. Products that are heat-treated already exists on the market, foremost the Finnish brand ThermoWood®, bur the project group want to find out if it would be possible to start a Swedish production with somewhat different applications than what is common today. The heat-treated wood has many attributes that have changed in the heating process. It becomes more biologically durable, it gains stability in form and dimensions and it becomes darker and looses several unwanted extractives such as resin. Disadvantages that can be mentioned are that the wood becomes fragile and the strength properties changes. My main purpose with this study is to look into customer involvement in the early phase of product development. I also want to find out if the customers I interview think that the product is worth working with, which means start a Swedish production.

In a phonological assessment, the aim is to obtain systematic and reliable data of a child's speech output, which can then serve as a basis for a decision on an appropriate intervention (Wolk & Meisler, 1998). Whether phonological assessment should be derived from an analysis of picture-naming or a conversation with the child, and whether the two methods for elicitation generate equivalent results, has been debated among clinicians and researchers for an extended time (Masterson, Bernhardt & Hofheintz, 2005).The aim of the present study was to compare two methods of speech elicitation for phonological assessment: spontaneous conversation and picture-naming, respectively. In the study, the procedures have been used when assessing children with phonological disorders as well as children with typical language development. The results are presented using two levels of phonological analysis; degree of phonological impairment, in terms of percentage of phonemes correct (PPC), and type of phonological impairment, in terms of phonological simplification processes. Eighteen (18) children participated in the study, nine (9) with phonological impairment (age 3;10 ? 5;11), and nine with typical phonologic development (age 3;2 ? 4;6).