ABB I-R Waterjet Systems combines the robotics and motion expertise of ABB Flexible Automation with high-pressure intensifier/pumping technology from Ingersoll-Rand to provide and continue to develop innovative waterjet cutting systems for global markets. The purpose of this assignment is to develop a process water purifier. The purifier should be applicable as an option to ABB I-R?s production cell Cutting-Box. At first hand the process water should be purified well enough to let out in the municipal sewage system, but the ultimate solution is purifying the process water to the range that recycling is possible. When investigating the different principle of purifying water, a research of different products and their manufactories was done. These different products were compared and the principle of filtration was the most applicable, as most of the products were designed for far larger applications. As the process water contains quite large amount of particles, it is necessary to perform the filtration in different steps. The process water purifier is therefore composed of a module of coarse filtration and one of micro filtration. In the module of coarse filtration the mainly amount of fibres and particles are eliminated. They are kept back in the container unit with the larger fragments and dumped with these when the container is emptied. In the module of micro filtration the filtration is performed in two steps. In the first step particles larger than 50?m are eliminated, in the second step the micro filter is setting the range of purifying, in this case 10?m.

This is a case study of the advertising campaign ?Guld till alla? (Gold to Everyone) embarked upon by Spendrups Bryggeri AB in a bid to promote Norrlands Guld, during the period 2004. The approach used by Spendrups will be compared with theories about communication planning, communication strategies, target group definition and how to create effective advertising. The main purpose of the comparison is to find which central elements that made the campaign successful. The method we have chosen to use is an explanative content analysis with influences from the dialogue analyse.?Guld till alla? was suppose to be an massive and coherent campaign which was to be integrated with large sports events, such as the Ice Hockey World Championship, UEFA European Championship and the Summer Olympic Games, that all took place the year 2004.

Mammary tumors are the most frequent type of tumors in bitches in Sweden. Many studies have been published concerning mammary tumors, but there is still much to be learned about this disease. One has, since some time ago, had the knowledge that addition to or removal of methyl groups to genes can inhibit or activate gene-expression. Methylation and demethylation is a normal phenomenon in the body and it is essential for the development and survival of the individual. The risk of developing a tumor disease is increased if the global methylationstatus is changed; if oncogenes demethylates (activates) or if tumor suppressor genes methylates (inactivates). In the human medicine one has seen that there are differences in methylationstatus between different tumors. In this study tumor and normal tissue from ten dogs were examined with regard to methylationstatus.

Gamification är en strategi som använder spelmekanismer och spelkomponenter för att skapa motivation och engagemang hos användare av olika typer av system. Denna studie syftar till att undersöka om gamification kan användas för att motivera användare av system för tillverkningsindustrin.Studien har genomförts med en initial litteraturstudie och kvalitativa intervjuer med experter inom gamification samt utveckling av system för tillverkningsindustrin. Intervjufrågor har därefter ställts mot tidigare genomförd forskning, för att identifiera möjliga resultat.Resultatet av denna studie visar att spelmekanismer och spelkomponenter skulle kunna användas i ett system för tillverkningsindustrin, förutsatt att det finns ett tydligt affärsmål, mätbar och användbar data samt identifierade drivkrafter hos organisationens maskinoperatörer. Vidare har ett antal punkter identifierats som kan vara motiverande för en användare av system för tillverkningsindustrin:Möjlighet för operatörerna att följa utvecklingen i sitt expertområdeKartläggning av operatörernas drivkrafter, vilken därefter används för att förbättra operatörernas arbetssituation, med exempelvis mer givande uppgifterBelöningar som utdelas är matchade mot operatörernas preferenser, med syfte att vara mer effektiva som motivationsskapare.

This report describes a master thesis performed at Saab in Arboga. The main purpose was to build a controller for a system containing a turn table and an antenna beam. The idea is to use this system on a boat where it will be exposed to position disturbances due to waves. The desired behaviour is that antennas placed on the antenna beam should point towards the same target all the time. To solve this problem the system has been modeled and simulated in Matlab and Simulink.

This is a study about a company in Norrköping, called Stadium AB, and its first steps into the global market. We have studied how the conditions of the company have changed during their expansion. This study is not written from the viewpoint of business economics, it is rather a study from a cultural and social studies perspective. The study deals with subjects such as the globalization of society, organizational theories and leadership. The empiric material consists of Stadium?s staff magazine Tracks, the company?s swedish homepage on the Internet and an interview with Sussi Calås-Jonsson, Chief of the Department of Information at Stadium AB.

Al Gore may have helped put global warming on the agenda. However, it is not a new subject. Neither is so called green marketing a new phenomenon within branding and communication. As more and more companies establish environmental strategies there exist beliefs that the environmental focus is becoming a triviality, which is the reason for this study. Implementation of words such as ?environmentally friendly?, ?green? and ?global warming? is becoming more and more widespread and frequently used within marketing communication.

A system for sampling of alcohol and aldehyde from diluted exhaust gases from vehicles powered by ethanol has been developed and tested. The major part of the work has been research of earlier work in the field and the construction of the sampling system.The part of the system constructed for the measurement of alcohol has been shown to work, however, more test should be performed. The part of the system constructed for the measurement of aldehyde was tested parallel to a commercially available system, based on the same principle of measurement, and has been shown to work well.Determination of the concentration of gaseous ethanol using a FID has shown the since earlier known fact that a FID is not able to measure a correct concentration of ethanol. Furthermore it has been shown that high concentrations of gaseous ethanol can not be kept in a bag more than a few minutes without a substantial decrease of the measured concentration..

The study has shown that retailers in the mid-price segment differentiate their brand through developing a strong company identity around the brand. The personality involves store atmosphere, merchandise and advertising. Larger companies have chosen to lay the responsibility on management level, which facilitates on store level. By controlling the strategies on a central level the company can make sure that the stores are steered in the direction that the company wants them to be steered in, and also that they follow the positioning-concept. The company can also devote its efforts to working with its core value, which is service.

The study has shown that retailers in the mid-price segment differentiate their brand through developing a strong company identity around the brand. The personality involves store atmosphere, merchandise and advertising. Larger companies have chosen to lay the responsibility on management level, which facilitates on store level. By controlling the strategies on a central level the company can make sure that the stores are steered in the direction that the company wants them to be steered in, and also that they follow the positioning-concept. The company can also devote its efforts to working with its core value, which is service.

A cars powertrain consists of everything that is needed for its propulsion. The components in the driveline that transfer the power from the engine to the driven wheels are not absolutely stiff, hence they will wind up due to the torque and act as torsion springs. If you suddenly demand a bigger torque by stepping on the accelerator pedal, a so called tip in manoeuvre, and that torque is acquired from the engine as quickly as possible, the driveline will not be able to transfer that fast torque change due to its weakness and as a result it will start to oscillate. These oscillations will be transferred to the driven wheels and make the car to accelerate jerkily which will be experienced as uncomfortable by the passengers. Furthermore, there is a backlash in the driveline that will make the weakness in the driveline even more excited than it should have been if the backlash did not existed.To avoid too big problems with these oscillations there is a control system that controls the demanded torque.

When developing software that is meant to be distributed over several different computers and several different networks while still working together against a common goal there is a challenge in testing how updates within a single component will affect the system as a whole. Even if the performance of that specific component increases that is no guarantee for the increased performance of the entire system. Traditional methods of testing software becomes both hard and tedious when several different machines has to be involved for a single test and all of those machines has to be synchronized as well.This thesis has resulted in an exemplary application suite for testing distributed software. The thesis describes the method used for implementation as well as a description of the actual application suite that was developed. During the development several important factors and improvements for such a system was identified, which are described at the end of the thesis even though some of them never made it into the actual implementation.

As companies grow, their need for computing power will increase, which traditionally resulted in companies having to invest in more IT resources. Now, with cloud computing, companies can easily hire computer power over the Internet, on-demand. Cloud computing offers a highly scalable environment where companies can store data and host their services. This paper employs a qualitative study with interviews and literature studies to explore opportunities and challenges associated with cloud computing from a system developer perspective. The aim of the paper is to find out how cloud computing changes the conditions for system development. The paper contributes with four different opportunities and challenges that the system developer must handle to succeed in the world of cloud computing.

A large amount of our time is spent indoors in an artificial climate. To make the experience pleasant there are requirements on the ventilation and the heating system. At the present time the most common form of heating is a radiator system complemented with a ventilation system. A ceiling heating system with combined heating and ventilation can replace the two separated systems. The benefit with a ceiling heating solution is that it saves space since the radiator system is no longer needed.

The thesis describes a completely new biofuel system to generate particle-free heat from combustion of ash-containing biofuel particles at high temperatures.The suggested system gives opportunities to introduce biofuels in new areas.Main components in the suggested system is a heat radiating combustion chamber intended for pulverized wood, combined with regenerators to extract heat from flue gases and simultaneously preheating the combustion air.The thesis contains a description of the suggested system, theoretical considerations, calculations regarding the combustion, and includes results from tests performed.The results from calculations and tests performed concludes that the system is workable and possible to apply..