The regulations for energy consumption are consistently getting more and morestrict. This leads to a higher customer demand for energy analysis early in the buildingdesign process. Many building planners and architects use powerful modeling softwareto visualize their projects. These digital models contain sufficient information aboutthe building?s physical characteristics for reliable energy analysis.

A large proportion of the energy consumption is in the building industry and a large part goes to heating our homes and premises. In the developing countries' development now threatens the large consumption of energy in our earth's climate. It is in the West world that we must be good role models in terms of energy efficiency. One solution to reduce energy consumption for heating of buildings may be to continue to build low energy houses and passive houses, but it is also about rebuilding the buildings that currently have high energy consumption such as the old Million program Houses. These buildings will be standing many years and their energy consumption will not diminish over time by itself and energy prices will certainly not diminish in the future.

Approximately ten people die every year at building sites in Sweden. Every year TheWork Environment Authority (Arbetsmiljöverket) receives 3200 accident reportsfrom the construction sector. The Swedish building contractor Skanska has the vision:?Zero accidents?. Only at Skanska Sweden, where this diploma work is preformed,350-520 accidents and mishaps are reported every year for the last 5 years.

A large amount of our time is spent indoors in an artificial climate. To make the experience pleasant there are requirements on the ventilation and the heating system. At the present time the most common form of heating is a radiator system complemented with a ventilation system. A ceiling heating system with combined heating and ventilation can replace the two separated systems. The benefit with a ceiling heating solution is that it saves space since the radiator system is no longer needed.

ABSTRACTThe discussions about energy use have increased year by year everywhere in the society, and so also in the healthcare sector. But what is actually energy use in a hospital facility, and what affects it?The typical way today to express the energy use is in kWh/m2. The problem with a key performance indicator that is expressed as energy use in relation to a specific area is that it does not take into account the activity in the building. Even though the activity to a very high extent affects the energy use.

This document?s content is the final report of the master´s dissertation Magnus Hällström did during springtime of year 2013. The dissertation?s subject is 802.11s wireless mesh networks with streaming video as a focus point.  During the dissertation a wireless mesh network was set up with different attached cameras for streaming video. A sun panel solution was also tested with the goal of creating a package with a self-configuring network node streaming video, powered by nothing but solar energy. .

The corn plant came to Europe with Christopher Columbus in the 14th century and have ever since bin cropped here, but corn haven?t bin very common in Scandinavia until recently. The mainly use for this crop silage but even corn for grain is cropped in Europe. Corn for grain is a common part of feed in beef and chicken farming. In Sweden corn for grain is pretty rare but almost 1000 hectares are used for this crop, Lantmännen Sverige is the biggest buyer of corn at the moment.

Energy costs are high nowadays and that is the reason why the energy consumption needs to become as small as possible in most of the companies. To accomplish the small energy usage one needs to map the energy flows, study them and monitor them. One method that can be used for this is energy balance calculation. The method gives an opportunity to separate different energy flows and see where each flow is heading. There is also another method which is more advanced than energy balance calculation.

It is essential to reuse- and recycles residues to decrease the amount of deposit materials and reach sustainable energy use. Two ways to work towards this is to recycle wood ashes to the forest as nutrient compensation and extract biogas from combustion of biomass.The aim with this study was to decide whether wood ashes that been used for biogas upgrading with accelerated carbonation also can be used as a nutrient compensation in the woods according to recommendations from the Swedish Forest Agency (Skogsstyrelsen).The ashes that were used in this study came from Johan Andersson who works at JTI in Uppsala, who also treated the ashes with biogas. The ashes have, in both untreated and treated condition, been analyzed in this study according to contents of elements, leaching properties, hardening properties and contents of crystalline phases, to evaluate what impact carbonation with biogas has on the ashes.The accelerated carbonation led to hardening of the ash, and decreased amount of CaO- and increased amount of CaCO3. The CO2-uptake also entails a dilution of the elements, and the content of nutrients and trace elements decreases. However the results show an indication of an uptake of S from the biogas to the ash, since the dilution had a smaller impact on S than the rest of the elements.

This thesis deals with our heritage and the care of old buildings. In order to limit this vast area a specific attention has been brought upon the process of giving buildings a certain level of protection and after decision having it taken away, instead of giving a stronger protection level.Further limitation has been done through the choice of four buildings in Lund, within Lund University campus. These buildings all lost this certain level of protection. The participants in these kinds of cases have a level of power, what argumentation did they use?The methods being used are discourse analysis, phenomenology and the daily methods of the building care field..

ABSTRACTThe discussions about energy use have increased year by year everywhere in the society, and so also in the healthcare sector. But what is actually energy use in a hospital facility, and what affects it?The typical way today to express the energy use is in kWh/m2. The problem with a key performance indicator that is expressed as energy use in relation to a specific area is that it does not take into account the activity in the building. Even though the activity to a very high extent affects the energy use.

To achieve a sustainable development, three aspects have to take equal place in the society; environmental, economical and social. To reduce the impact on the environment and the amount of greenhouse gases supplied to the atmosphere, industrialized countries and less developed countries must start cooperating. Also the use of renewable energy sources, like solar, hydro and wind power, have to increase.Wind power has great potential as a future energy supply. It is cost efficient, quickly developed and the resource is abundant and available worldwide.Examinations made in Sweden, indicates that there are difficulties establishing wind power at the same pace as the environmental goals, set by the Swedish government, requires. Mainly because people living nearby potential areas for wind power farms, appeal against the decision.This study aims to investigate differences between how people in Sweden and Brazil look at wind power as a future energy source and at the establishing process.

Abstrakt -  As energy prices rise, energy-saving in buildings is becoming increasingly important. By applying different construction and installation technologies, to new buildings the energy consumption can be reduced effectively, compared to similar existing buildings. These technical measures are often an investment in the long term and will reduce energy costs significantly. The purpose of this report is to show how to reduce energy consumption in a small house. It is presented in this report that both building's technical saving arrangements (the sealing of a building) and an installation technical arrangement (changing from the F-system to the FTX-system) would reduce energy consumption in newly built detached houses, if compared with a similar existing house but without these technical measures. The report presents also detailed calculations showing how much energy an existing 2-storey house, built in the year 2007 in Eskilstuna, consumes and how much energy would be saved if these corrective measures were applied to a new building. It is also reported how much money would be saved each year over a 10 year period if the measures were applied. The results show that both solutions are a good investment in the reduction of energy consumption and hence the cost involved. Keywords: energy, heat energy, infiltration, FTX-system, free temperature effectively. .

The Republic of Moldova, situated in eastern Europe and a former part of the Soviet Union, is now experiencing a phase of transition in both society and landscape. They have hardly any fossil depots and are currently dependent on Russian gas, with 97% of their energy needs imported. The new elected government wants to move towards the EU and this is generally seen as the way to grow and reduce poverty. Security in the energy sector is important and one tool is to increase the use of renewable energy sources. Through interviews, texts, and visits I have studied the implementation of renewable energies (RE) in Moldova through a society development perspective. The study has aimed to investigate the sociotechnical complexity of this subject and to discuss the potentials and way of dealing with the subject in the specific cultural context of Moldova.

Too high levels of noise lead to various health problems and cost society billions of SEK peryear. In this thesis we have examined a model of the A40E articulated hauler at VolvoConstruction Equipment in Braås. We have tried to reduce cabin noise in an articulated hauler,while also providing a way on how to proceed with a machine when the cabin does not measureup to the sound requirement. The best way to find leaks were with a reference source of model4205 and its speaker HP 1001 from Brüel & Kjaer in the cab and then walk around and listen towhere the reference source was more prominent. In this way, we found that the edges and theplugs were sensitive areas.