Today an increasing number of schools and organizations are investing in so called Learning Management Systems. Researchers disagree on the pedagogical value of these tools. Some mean that Learning Management Systems cement old-fashioned behaviouristic teaching practices; others mean that the systems provide good opportunities in supporting learning in a socio cultural perspective. The aim of this study is to reach better understanding and increased knowledge of how the introduction of a Learning Management System influences the role of the teacher and how the learning is organized. We have conducted two case studies.

The main goal with the master thesis has been to do a status evaluation of the chain machinery with its start chain and wire to secure the production on a short basis due to that a reconstruction is not planned at this time. An evaluation of the condition of the start chain and the rollers in the chain depository has been done. An offer has been requested for a new start chain and the evaluation of the start chains may be a basis for the decision taking. The production has been able to go on, although it has arisen some problems which have been difficult to find the causes for. There is no gathered ?picture? of the machinery status and a mapping of each machinery has been compiled of comprehensive logs.

This project investigated the current market regarding wireless net and the communication between the tools used for diagnostics/maintenance and an embedded system. Based on documentation obtained through interviews a demo system was created based on Bluetooth Low Energy (BLE) communication between an embedded system and an Android device.This report intends to describe the tools and methods used in the design of the demo system and the result of an analysis of the BLE communication.Bluetooth Low Energy is an exciting protocol with wide applicability within the industrial field. This project investigated the communicational possibilities between a Smartphone and a Raspberry Pi and based on the results that emerged the conclusion can be drawn that BLE is a protocol with many beneficial applications within industrial IT..

Detta examensarbete är utfört på Stockholm Vatten som producerar och levererar dricksvatten till drygt 1 miljon personer i Stockholm med omnejd. I likhet med andra bolag inom vattenbranschen har Stockholm Vatten stora energikostnader vid distributionen av rent vatten samt vid omhändertagandet av avloppsvatten. År 2003 var denna kostnad ca 55 miljoner kronor och därmed en betydande del av bolagets totala utgifter. Större delen av energiförbrukningen uppstår vid vatten- och avloppsverken då vattnet ska tryckas ut i nätet men stora mängder energi förbrukas även i själva ledningsnätet. Syftet med detta arbete har därför varit att undersöka hur och varför energianvändningen ser ut som den gör i en zon i södra delen av Stockholm.

At the farm Fride, in Lojsta at the Southern part of Gotland, my family runs a pig production with 80 part-integrated sows in a ?Familybox-system?. The main parts of the facilities are from the early 90´s and have done their job. The production results have the last years decreased because of new infections so we have to do something before shifting ownership! This degree thesis is meant to answer the question about which the optimal extension would be today. By studying literature, use my own experience and make lots of calculations, I try to find out different opportunities.

Ett konsultföretag får in anbudsförfrågningar och måste därmed göra kalkyler för dessa förfrågningar. Med hjälp av ett webbaserat system där en anställd kan göra kalkyleringar kan företaget få ett gemensamt sätt att arbeta och uppföljningen underlättas. Systemet som har skapats ger användare möjlighet att göra anbudskalkyler genom en överskådlig och lättarbetad webbsida, där man kan se förhållandet mellan företagets kostnad gentemot kundpriset. All information lagras persistent i en databas för att möjliggöra uppföljning och synkronisering med andra system som används på företaget..

The purpose of this project was to further develop and complete a quadcopter that had been built in an earlier course at KTH, so that it could be used for demonstration and education at the school. The quadcopter was at the beginning of the project completed when it came to hardware, and there was some software functionality implemented but no system for automatic stabilization. The main goal of the project was to implement such a system, and to combine it with the previous functionality to make the quadcopter operable and able to fly. To create a functioning and stable ground multiple basic software features has been implemented, and on top of that additional software to improve the safety, stability and functionality. The most important part is the control system that is responsible for converting sensor and control signals to suitable motor values.

The purpose of the study is to investigate the possible effects of an unstable ventilation system and its influence on energy use and thermal comfort. The report also explores how qualified personal working with HVAC view and handles system control.In order to meet the requirements in energy efficiency and a comfortable indoor climate control regulation is a prerequisite. With optimized increased complexity of the climate systems, it becomes more challenging to control the system and the risk of unstable control increases. No previous studies about what affect an unstable system can have on energy use and thermal comfort have been found.The report is based on several tests were the controlling variable has been increased until the system becomes unstable. Two different types of unstable systems have been investigated.

The increasing complexity in the development of a configurable real-time system has emerged new principles of software techniques, such as aspect-oriented software development and component-based software development. These techniques allow encapsulation of the system's crosscutting concerns and increase the modularity of the software. The properties of a component that influences the systems performance or semantics are specified separately in entities called aspects, while basic functionality of the property still remains in the component. When building a real-time system, different sets of configurations of aspects and components can be combined, resulting in different configurations of the system. The temporal behavior of the system changes and a way to ensure the predictability of the system is needed.

I föreliggande studie undersöks hur användare upplever användbarheten i ett säkerhetskritiskt system ? Luftfartsverkets flygledningssystem SIGMA. Utifrån litteraturstudier definieras begreppen användbarhet och säkerhetskritiska system. Empirin utgörs av intervjuer med användare av SIGMA-systemet. Studien visade att användarna upplever att systemet i väsentliga delar har bra användbarhet, vilket utifrån litteraturstudier, intervjuer och efterföljande analys främst tycks bero på att systemet arbetats fram med stor användarmedverkan och att det var utarbetat specifikt för arbetsplatsen.

This master thesis work was done at Saab Underwater Systems AB, a company at the cutting edge of underwater technology. Here torpedoes and other underwater vehicles are developed and manufactured. The major customers are navies of different countries, mostly the Swedish navy. The aim of this master thesis is to develop, construct and evaluate an automatic Trim System for Unmanned Underwater Vehicles. The task of the system is to change the position of the centre of mass and the vehicle?s total mass or volume.

Elever ska enligt kursplanerna i teknik få förståelse för de tekniska system de möter i sitt dagliga liv. Genom att eleverna får kunskap om teknik i allmänhet och tekniska system i synnerhet får de möjlighet att påverka sina liv som medborgare i en demokrati. I litteraturen saknas idag studier om elevers uppfattningar om tekniska system. Syftet med detta examensarbete är därför att studera vilka vardagsuppfattningar elever har om de tekniska system de möter i vardagen. Studien utgår från systemteori vilken ger en möjlighet att utnyttja det gemensamma mönster som kännetecknar analys av system.

European Union has made a new decision that all new built houses by 2020 shallbe near-zero energy houses. Boverket?s definition of near-zero energy housesintends buildings with good energy performance in which a proportion of theamount of energy that must be added to the building is made of renewable energy.Passive House is a set of requirements from FEBY designed to build energyefficient buildings. This is achieved by reducing loss of heat through the buildingenvelope and to take advantage of the passive heat from solar radiation,installation and heat sources like people living in the house.This project has been made with help of Anebyhus and one of their model houseshave been examined from the report?s issues, including Anebyhus?s energyperformance, requirements for the manufacturing and assembly, how theenvelope must be improved to fulfill the requirements for the Passive House andwhat energy calculation programs are available on the market.The report aims to provide solutions for energy efficient houses that are adaptedfor production of house building.Two visits to Anebyhus has been done to study their manufacture and assemblyof building elements.

Computer based information systems play an important role in modern military combat vehicles. The crew needs to be able to quickly get information about both the vehicle and its outer surroundings in order to quickly make the correct decisions. In this report, we describe the development of a prototype new information system for the BvS10 vehicle, manufactured by BAE System Hägglunds AB in Örnsköldsvik.An important aspect of the system is the time it takes from the point that the information is generated by the vehicle sensors until it is presented to the user. The system must be able to ensure that it never displays information that is out of date. Thus, it is important to create a layer and component based architecture for the solution, making it possible to control, in detail, the information?s age as it moves through the system.

When using the digital halftone proofing systems, a closer print match can be achieved compared to what earlier couldbe done with the analogue proofing systems. These proofing systems possibilities to produce accurate print match canas well lead to producing bad print matches as several print related parameters can be adjusted manually in the systemby the user. Therefore, more advanced knowledge in graphic arts technology is required by the user of the system.The prepress company Colorcraft AB wishes to control that their color proofs always have the right quality. This projectwas started with the purpose to find a quality control metod for Colorcraft´s digital halftone proofing system(Kodak Approval XP4).Using a software who supports spectral measuring combined with a spectrophotometer and a control bar, a qualitycontrol system was assembled. This system detects variations that lies out of the proofing system´s natural deviation.The prerequisite for this quality control system is that the tolerances are defined with consideration taken to the proofingsystems natural deviations.