Idag ställs stora krav på företag att vara miljömedvetna och resurseffektiva i sin verksamhet. Vid mjukpapperstillverkning används stora energimängder och inom industrin har det under många år funnits en strävan att energieffektivisera processer och att tillvarata spillenergi, bland annat genom värmeåtervinning. Valmet Tissue Technology Center i Karlstad har idag en pilotmaskinen utan värmeåtervinningssystem. Den här undersökningen gjordes i syfte att ta reda på hur stor återvinningspotentialen är för värmeväxling i pilotmaskinens torkpartier, bestående av Yankeekåpan och TAD-cylindrarna. Tre maskinkoncept undersöktes: DCT®, NTT? och TAD.

This thesis examines the environmental benefits resulting from the choice of environmental certification scheme, with focus on energy. This was carried out by studying the measures that were implemented as a result of the certification of Sweco's three largest office buildings in Stockholm, Gothenburg and Malmö. The office property in Stockholm has been certified with the Swedish Environmental Building, Gothenburg with the British BREEAM and Malmö with the U.S system LEED.The results from the study indicate that an environmental certification can reduce the energy consumption by up to 59 percent and the water consumption by 20 to 66 percent. However; the interviews, literature study and simulations in MATLAB indicate that the size and scope of these environmental benefits depend on several identified factors: the type of building and its conditions, system selection, grade level, the choice of indicators, the ambition of those involved and when in time the certification process begins. The comparison between Environmental Building, LEED and BREEAM showed that Environmental Building for the office property in Stockholm gave the largest environmental benefit in terms of reduced energy consumption thanks to several large measures.

The purpose of this essay is to do an ecocritical reading of Vilhelm Moberg?s The Emi-grants from 1949. By asking and answering the three following questions; How does a system present itself, What are the different reasons for emigration; Why does differentsystem fit some well and some not.By using two articles from Green Planets - Ecology and Science Fiction to illus-trate two different views; Different parts value in an ekosystem and The Ship as an ecosystem. I have also created, based on the literary text four different terms concern-ing the dynamic system; Stable, Static, Unstable and Collapsing systems. I have found that all system goes through changes, some drastic, that changes the way the parts of the systems fit with in it.

The purpose of this study is to create a method that can be used to produce decisionsupport data for the climate goals of a municipality. The method should be able to demonstrate the potential for reducing energy use and greenhouse gas emissions for measures aimed at the stationary energy system in the municipality. It will be used to make longterm projections of energy use and greenhouse gas emissions in order to be able to demonstrate the ability to reach climate goals. The aim was also to test the method's applicability by using the municipality of Uppsala and the Uppsala climate protocol project in a case study. Uppsala climate protocol is a project consisting of participants from business, government and organizations that voluntarily want to commit to reducing their carbon footprint by reducing their energy use and thus work to achieve the municipality's overall climate goal. Public reporting of energy use and climate impact has been studied in order to examine the nature of indicators and accounting figures that are commonly used in the field and how long-term forecasts are formulated. In connection to this, the type and sources for the kind of data needed was also examined.

This Thesis aims to explore how to integrate an IT-system for facilitating anorganizations work with Continous Impprovements.This is done here by examining and analyzing the process within a handful ofcompanies who seem to have been successful with their own implementations. Thestudy is focused on the implementation of one particular system, "System C2".Simliarities and differences between the companies, and the established rule of thumbfor these kind of activities are focused upon. This to emphasis how another actormight emulate some of the apparent success.Part of the core question is found in the title, since Continous Improvement is oftenseen as a relativly low-risk activity, is it then also possible to take a low-risk slow pathto the implementation of such a system in the entire organization?.

The energy consumption continues to increase as the use of electronics and energy consuming equipment increases. The use of fossil fuels has to be phased out for this to be sustainable in the long run while the use of renewable energy continues to increase. A renewable energy source is solar energy but the production of heat and electricity are today very expensive compared to other energy sources and an important task for the solar energy market to grow is therefore to minimize the production cost of the solar collectors while increasing its efficiency to produce heat and/or electricity. One way to convert solar energy into heat is by using solar collectors and electricity can be produced by utilizing the produced heat, or by applying solar cells.This thesis aims to recommend a reflective material for the next generation solar collectors from Absolicon and to recommend a commercially available coating for the receiver tube of the solar collector. A market study has been carried out to investigate the cost-related aspects along with the optical and durable aspects for the optical material of the solar collector.

This thesis aims to develop a control system for measuring electromagnetic compability (EMC). This has meant that a controller designed around an ATmega8 microcontroller has been manufactured and programmed. It has also meant the development of a comprehensive control software in the program MATLAB. The control system has been tested with satisfactory results and can now, monitor and control measurements of the EMC-type..

Climate and environmental issues is now high on the agenda. We live in a generation that must try to solve some major environmental problems. Buildings and habitations account for approximately 40 % of Sweden's total energy today. To reduce this figure, as needed, more research in the field of energy efficiency is required.This thesis concerns the heating of buildings. The load on district heating is heavy during certain times of the day.

The aims of the practical work carried out for this thesis were to redesign a clinical decision support system for thoracic surgeons, called AssistMe, and to evaluate the concept behind this system. The main objective of the thesis is to give an account of the considerations that were found to be of key importance for designing a clinical decision support system for thoracic surgery. Another aim was to let future users test the system after it had been redesigned and evaluate the concept behind it. The thesis also investigates users? experience of the system and their views on whether it would be applicable in their daily work practice.

Over 90% of forestry work is carried out today by contractors, thereforeclear agreements between the client and the contractor it is of utmostimportance. Contract Packages for work within the forest sector (APSE) is acollection contract templates that the industry jointly developed for thispurpose. The purpose of this thesis is to examine how forest contractors doto keep themselves updated of the current laws and government regulations,which channels are available to accomplish this and what possible obstaclesmay occur. 20 interviews were conducted with contractors engaged inlogging. The results show, among other things, the availability of and whichchannels most contractors use out of which aggravating circumstances existand how strong they are perceived and what is expected of the client in thisregard..

The purpose of this study is to create a method that can be used to produce decision supportdata for the climate goals of a municipality. The method should be able to demonstrate the potential for reducing energy use and greenhouse gas emissions for measures aimed at the stationary energy system in the municipality. It will be used to make long term projections of energy use and greenhouse gas emissions in order to be able to demonstrate the ability to reach climate goals. The aim was also to test the method's applicability by using the municipality of Uppsala and the Uppsala climate protocol project in a case study. Uppsala climate protocol is a project consisting of participants from business, government and organizations that voluntarily want to commit to reducing their carbon footprint by reducing their energy use and thus work to achieve the municipality's overall climate goal.

The aim of this thesis is to investigate the opportunities of classification of web pages. Two classification systems are compared; a library classification system traditional and a system that is developed for use on the web new. UDC is chosen to represent the traditional systems, and Yahoo! represents a so called new system. UDC is used by NISS Directory of networked resources, which is a directory that uses the system for organisation of electronic resources. Both systems are analysed from two different perspectives, a multidisciplinary and a timeperspective.

The client, Senselogic, had noticed an increased demand for an e-commerce system integrated into its product, SiteVision, something that did not previously exist. Senselogic wanted to integrate a third-party system to manage e-commerce. The problem was that there were very many e-commerce solutions to choose from. In order to select the best system it was necessary to evaluate the e-commerce systems and compare them to each other. To identify the elements that has to be included in an e-commerce system a study of literature was conducted.

This diploma work on D-level is made in cooperation with Varnäsföretagen AB in Eskilstuna. The company performs contract manufactured aluminium goods. This work is a continuation on earlier diploma work in Varnäsföretagen AB. Even if the industry process consumes much energy for melting the aluminium goods, they consume a great amount of oil to warm up the building. The purpose of this work is to examine some places in the building and the process to see how much energy it is possible to recycles to the heating system and reduce the costs for heating.

SharePoint is a web based platform designed to provide internal communications and file sharing for businesses and organizations.In this project, we created a system consisting of multiple applications to be used together with SharePoint. These applications are meant to simplify the workflow for internal orders of products. The system is targeted towards companies that do not have a flexible approach to digital orders or companies that want to integrate this functionality into their SharePoint platform. The project includes, in addition to the creation of the system, installation of the software and the servers needed to run a SharePoint environment and their configurations.The system consists of four applications where one of these, the store application, is required for the system to be used at all. The other applications are an order management application, a purchase application and an incoming delivery application. Of these four, we have implemented the store application and the order management application. Our hope is that users will find the system easy to use and graphically appealing..