Syftet med examensarbetet var att skapa ett kostnadseffektivt, vackert fackverk av limträ i en samtidig utvecklingsprocess med arkitekt, konstruktör och entreprenör. Metodiken har till stor del följt idéerna i concurrent engineering, en samtidig utvecklingsprocess där alla involverade gemensamt kommer fram med förslag och lösningar. I och med att arkitekt, konstruktör och entreprenör jobbar samtidigt utformas också hela konceptet inklusive detaljer och produktionsprocess i en och samma utvecklingsprocess. Till stöd för beslutsfattandet i designprocessen har axiomatisk design använts, vilket är en metodik som hanterar design i matematiska termer. De olika lösningar som evolverar från processen concurrent engineering har sedan optimerats med ett Matlab-program med avseende på lägsta materialkostnad.

This report is a bachelor thesis work within the field of Product Development and is also an assignment for Thule Sweden. The work has been performed by Niclas Tjäderborn and Christian Holm, students at the Mechanical Engineering Program with major in Product Development and Industrial Design at Jönköping School of Engineering during spring the semester of 2009.The thesis work concerned the development of a new wheel holder for bike carrier for Thule Sweden. The background to the project was that the initiator wanted a more user friendly wheel holder with better design than those available on the market. The wheel holder is able to be implemented on one or several of Thule?s current wheel holders.

This report describes the planning and the accomplishment of the final diploma workat the study program Mechanical Engineering, Department of Engineering Sciences, Uppsala University. Two students carried out the diploma work at GE HealthcareHusbyborg in Uppsala.The aim of the diploma work was to develop and improve existing processequipment for 11C-radiochemistry in PET. The process equipment was to be dividedinto smaller independent modules to make it more flexible. Part of the existingprocess equipment is an oven that is supposed to perform a specific chemicalreaction. One of the main goals was to study and improve this oven.The work could be divided into three main phases: 1.Present concepts for one module, and interface between different modules.

The aim for the project was to develop a risk analyse tool for measuring the fire safety level in Cultural Heritage buildings of Visby, Gotland. In 1995 Visby were taken into the Unesco:s World Heritage List with the explanation ?Visby is an outstanding example of a Northern European walled Hanseatic town which has in a unique way preserved its townscape and its extremely valuable buildings? One of the demands for the tool was that it should be easy to use and result into a ranking level in examined buildings. The user of the tool is recommended to be personnel in the fire department. To develop the tool a Multi Attribute Decision Making (MADM) method was used.

This paper discusses sound education within school subjects such as music, science, engineering, computer science, and Swedish to classes at the intermediate stage..

This report describes the planning and the accomplishment of the final diploma workat the study program Mechanical Engineering, Department of Engineering Sciences, Uppsala University. Two students carried out the diploma work at GE HealthcareHusbyborg in Uppsala.The aim of the diploma work was to develop and improve existing processequipment for 11C-radiochemistry in PET. The process equipment was to be dividedinto smaller independent modules to make it more flexible. Part of the existingprocess equipment is an oven that is supposed to perform a specific chemicalreaction. One of the main goals was to study and improve this oven.The work could be divided into three main phases: 1.Present concepts for one module, and interface between different modules.

This bachelor thesis is about an ultrasonic sensor, implemented in a bubble chamber in Artis. The sensor consists of the piezoelectric sensor and an electronic control circuit. The control circuit consists of a programmable microprocessor, PIC18F2420 and a circuit, which sends the excitation signal to the piezoelectric sensor, and later receives the echo. This bachelor thesis consists also of a theoretical study, which examines different techniques of liquid level sensing in a chamber. The study discusses which factors are important in liquid level sensing and examine accepted methods.

This major project in Building Engineering has its focus on inquiring into what methods has been used in the planning process of the residential buildingLjusbojen 1. This project has been conducted in cooperation with Kadesjös Ingenjörsbyrå AB, an engineering contractor firm which also acts as the property developer. Initially several different general methods for planning residential buildings have been presented. After the methods from the process of building Ljusbojen 1 has been analyzed compared to the general methods presented in part 1. This shows what the determining factors are during the planning process; factors such as cost, quality, time management, know-how and environmental issues.

This report is a bachelor thesis work in the field of product development and design. The assignment has been to develop a solution for roof racks, normally used for cars, to fit on the open trailer models FS1425 and Alugance. The project was implemented by Johan Andersson and Victor Karlsson, students at the Mechanical Engineering program with a focus on product development and design at Jo?nko?ping?s school of Engineering, in spring 2012.The client wants to use transport solutions in the same way as roof racks on cars. The user of such a product is assumed to desire simplicity, safety and an attractive design with an appealing price, which has been a challenge during the thesis work.Pre-studies have been conducted to examine the potential competitors and gain knowledge in the research area.

The purpose of this work is to find out if the suctionvalve to the salivaejector for dental equipment in a simple way can be improved or if a new design is needed. The result of the examination of the suctionvalve shows that the friction between the piston and the seal is high and that this causes the valve in a few cases sheaves. The study concluded that only small changes in material or detail, improve the component..

Denna uppsats beskriver Internet i Kina i allmänhet, från dess politiska bakgrundsmotiv och inledande grunder till dess nuvarande tillstånd av dynamisk ekonomisk infrastruktur och medel för folkligt politiskt inflytande. Tonvikten läggs vid för Kina unika aspekter, såsom partiinflytande över informationsutbytet, folkliga attityder till fildelning i ett samhälle som bara nyligen erkänt privat ägande samt effekter av kulturkrockar på nätet mellan västlig och kinesisk civilisation. Det argumenteras för att Kina i en framtid kommer att ha ett stort inflytande över cybermarknader och i beslutsfattande om Internets framtida utveckling, genom tekniska, ekonomiska och politiska medel. Slutligen resoneras att Internet i Kina har förändrat och kommer att förändra folkets mentalitet, så att det anammar västerländska tankemönster i liknande utsträckning som i angränsande länder, vilket banar väg för politisk pluralism..

The high level of competition and the rapidly growing technology development has created new challenges for today's businesses where they are forced to deliver more customized products at a lower price and a shorter time period. This places high demands on the companies' ability to design and develop better products in a more efficient way. In addition to developing products, the design process focuses on securing long-term success for the company by developing nourishing skills. However, to achieve an effective design process the companies must improve their ability to plan as well as use their knowledge base in a more efficient manner. Toyota's product development system is a critical component for companies to address challenges that they?re facing and offers a great potential to create significant competitive advantages.

This report describes a final thesis done during the spring of 2008 as part of the bachelor degree in computer engineering degree at the School of Engineering in Jönköping.The client is working in the consulting business and is involved in, amongst others, work regarding information security. Within this field they perform so called Threat, Risk and Vulnerability assessments. Today these assessments are done by a predefined method, but many details are controlled by the person documenting the project. A wish was made that the implementation was standardized, it should also ease the task of estimating the need for time and money. The solution for this seems to be a software tool.

Det här examensarbetet har genomförts i samarbete med Metso Dynapac AB i Karlskrona. På deras asfaltsvältar finns idag olika modeller av körspakar. De har samma grundfunktion och bör kunna samordnas till ett gemensamt reglage. Detta ger möjligheter att använda rationell tillverkningsmetod p.g.a. volymen.

This master thesis deals with reading and library habits among young male students at the vehicle engineering programme in an upper secondary school. Also their overall opinion of libraries has been looked into. For the completion of this study all of the 43 students in question took part in a questionnaire while 5 of them were interviewed. The result of this statistical survey complemented with more focused interviews show that at some time or another all the students read, but their preference lies within the news and engineering pages of daily newspapers and periodicals. Those who read books choose action and fantasy for content.