This report discusses the development of lessons based on laborations for middle and high school.The purpose of the project was to research the possibility to affect students' attitude towards physicsthrough well-planned stimulating lessons. The lessons were based on the Light and Lasers OutreachKit, a teaching package made by the organisation Laser Classroom, and have been adapted for physicsin middle and high school. The lessons were developed on a pedagogical and didactical ground andwere improved with surveys and peer and self assessment. The lessons were based on laser light and itsproperties. One lesson covered the topic of single-slit diffraction, while the other treated Geometricaloptics.

This report discusses the development of lessons based on laborations for middle and high school.The purpose of the project was to research the possibility to affect students' attitude towards physicsthrough well-planned stimulating lessons. The lessons were based on the Light and Lasers OutreachKit, a teaching package made by the organisation Laser Classroom, and have been adapted for physicsin middle and high school. The lessons were developed on a pedagogical and didactical ground andwere improved with surveys and peer and self assessment. The lessons were based on laser light and itsproperties. One lesson covered the topic of single-slit diffraction, while the other treated Geometricaloptics.

This report discusses the development of lessons based on laborations for middle and high school.The purpose of the project was to research the possibility to affect students' attitude towards physicsthrough well-planned stimulating lessons. The lessons were based on the Light and Lasers OutreachKit, a teaching package made by the organisation Laser Classroom, and have been adapted for physicsin middle and high school. The lessons were developed on a pedagogical and didactical ground andwere improved with surveys and peer and self assessment. The lessons were based on laser light and itsproperties. One lesson covered the topic of single-slit diffraction, while the other treated Geometricaloptics.

A study was carried in conjunction with the Orthodontic department at Halmstad General Hospital in Sweden to investigate the possibility of reducing cost and manufacture time of dental implant drill guides. The current system involves sending a digital image in STL format to the Materialise factory in Belgium where information of the position of dental implants is translated onto a moulded mouthpiece. Drill guides are placed in the mouth piece which is then returned to the surgeon. The mouthpiece complete with drill guides is then placed in the patients mouth and used as a guide for the implant drill holes. The cost of 10000 sek and a turnaround time of 2 weeks gave rise to the need for a faster and cheaper solution.

The company Bergteamet, Boliden, Sweden, is installing ventilation shafts of the Garpenberg mine. For such work a platform is needed which you can stand on and work from. The Shaft Reinforcement Team at Bergteamet performs the installation work and is the sponsor of the platform. The project described in this report is performed at the department MEC, Mining Equipment Construction, which has been given the task to design and construct the platform, customized for the current shaft. After this the platform is manufactured and inspected at the workshop at Bergteamet.The design work was carried out as follows:- After an initial meeting a requirement specification was worked out, describing the problem and previous experiences of platforms and requirements for the design and equipment.- A concept sketch was developed with consideration of surrounding factors.- A constructed 3D model was presented along with the choice of materials.

This Master Thesis is a product development project that has been carried out in cooperation with Scania CV AB. The purpose has been to find the relationship between geometric parameters and the swirl number for an XPI- cylinder head in order to improve the design specification.The increased focus on environmental issues from society leads to tighter emission legislations for the truck manufactures. In order to drive the development forward considerable resources are spent on research and development on diesel engines and its combustion process. The inlet air has a significant impact on the formation of emissions and the flow that is desired is called swirl. Swirl is achieved by making the air rotate around the vertical axis of the cylinder.Earlier cylinder heads that has been developed at Scania CV AB have shown clear relationships between geometric parameters of the cylinder head and the swirl number.

In Sweden, harvesting pre-commercial thinning (PCT) stems for energy purposes is a interesting way of financing the high cost of preparing dense stands for a profitable first conventional thinning. This concept can be labelled bioenergy thinning. The aim of this study was to quantify the productivity of a Vimek 404R light harvester with an accumulating Naarva-Grip cutting head during the bioenergy thinning of a self-regenerated stand west of Sunnansjö in Dalarna. The stand was birch-dominated, contained 15 371 stems/ha, and measured on average 4,6 cm Dbh and 7 m tall. Even though the driver was well experienced with the machine, the stand in question was the first one that he ever thinned in this manner. Nevertheless, the driver strived to accumulate as many stems as possible during each crane cycle and chose to cut taller stems in half so as to make the handling and forwarding of the harvested stems easier.

BAE Systems Hägglunds has a long history of producing high performance terrain tracked vehicles (mostly for military applications), and they are now aiming at developing a tracked forwarder with similar techniques.The forwarder will be of series hybrid type where a diesel engine via a generator will power the motors (one for each drive wheel). Thanks to individually controlled motors and the gentle rubber tracks, this forwarder is calculated to have a considerably higher average speed in the terrain and to be more gentle to the soil. The forwarder with a weight of 11 metric tons and a load capacity of 15 metric tons is specified to have an average working speed of 7-10 km/h, a top speed in terrain of 15 km/h and a top speed on roads of 40 km/h.This master?s thesis aims at developing a conceptual design of the forwarder?s drive module which includes electric motor, gear unit, brake and drive wheel.To investigate if the requirements can be fulfilled a study of the dimensioning loading scenarios has been carried out. The resulting needs regarding the torque has been considered in order to determine the required gear ratios for different motor options.

The aim with this thesis was to investigate what characterises an English Arts and Crafts garden how they could be modernised in Sweden. My research was limited to 20 weeks of full-time writing and worth 30 ECTS. Through literature studies, interviews and site visits I could analyse my findings which resulted in a concrete garden design project. The Arts and Crafts was a movement that started in England during the 1880?s and evolved as a reaction towards the industrialisation. The influence came from the writings and practices of John Ruskin (1819-1900) and William Morris (1834-1896) who advocated the importance of craftsmanship. The Arts and Crafts movement also became a ?recipe for life? and was associated with a healthy and morally pure way of living.