The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this work is to develop and test a design process where quick decisions and model building has a prominent role. The goal is to develop a number of products and build prototypes to be shown during the Carl Malmsten Furniture Studies spring exhibition 2012. I?m also writing a report describing my work.To reach my goal I have each day during the first phase conducted a short research and found a concept based on that days name day. Then I have continued in the workshop and worked with three-dimensional models.

One of the purposes of this work was to find out what it means to have a conceptual understanding of geometry. It describes how the geometry evolved from history and the geometry that is taught in grade one to nine and collage. The area examined was based on fundamental geometric objects for example two- and three- dimensional objects and its characteristics and especially focusing on the areas of perimeter, area and volume. The literature- review showed that the conceptual understanding was primary to developing a good knowledge of geometry. The second purpose of his study examined whether pupils achieved the goals in geometry by working with a Mathematics Book.

The purpose of this work is to develop and test a design process where quick decisions and model building has a prominent role. The goal is to develop a number of products and build prototypes to be shown during the Carl Malmsten Furniture Studies spring exhibition 2012. I?m also writing a report describing my work.To reach my goal I have each day during the first phase conducted a short research and found a concept based on that days name day. Then I have continued in the workshop and worked with three-dimensional models.

The purpose of this work is to develop and test a design process where quick decisions and model building has a prominent role. The goal is to develop a number of products and build prototypes to be shown during the Carl Malmsten Furniture Studies spring exhibition 2012. I?m also writing a report describing my work.To reach my goal I have each day during the first phase conducted a short research and found a concept based on that days name day. Then I have continued in the workshop and worked with three-dimensional models.

The report aims to show how outdoor environments have been shaped with the purpose of experiencing them from the inside of buildings, through an overview perspective. Two Danish gardens are used as examples. One is the Baroque garden in the garden of Frederiksborg castle in Hillerød. The Baroque garden is thus a part of a larger garden. The second garden is the Charlotte Garden, a relatively newly constructed garden within a housing complex in Østerbro in Copenhagen. Both gardens are analyzed on the basis of visual expression and structure. In the report, it is also discussed how the contemporary society have evoked the different ways of shaping the gardens.

Mapping a process enables a greater understanding of the work, and is standard to evaluate and improve a process. This thesis is conducted at Test Bed Mechanical Design at Scania in Södertälje. Test Bed Construction is a complex process, characterized by a large amount of creative work, technical challenges and coordination between different people and different organizational functions.The aim of the thesis was to identify the Test Bed Construction Process and to develop a visual model of the workflow that also served as support for the engineers in their daily work. During the mapping process, comparisons were made with previous research in lean product development to identify process improvement.A literature review on process mapping and process visualisation resulted in a method for process mapping. The study showed that research on process visualisation is neither structured nor well defined.

This essay concerns the interpretation of house plans in three-aisled longhouses and hall-buildings, in Scandinavia during Iron Age. Full scale house reconstructions need a better basis of interpretations to understand the patterns of roof supporting post holes in excavated house plans. This has led to the thesis, presented here, that the layout of house plans during Iron Age is based on geometrical proportions. In order to prove this, geometric house plans were applied and compared with excavated house plans in 11different case studies, including the fortification of Fyrkat Denmark. It was found that all house plans in the case studies indicate, that the geometrical proportions 1:2, 1:3 and 2:3 of a given circle must have been used for the basic layout of the roof supporting post holes, using a compass and a straightedge.

Habitat selection of migratory brown trout at the upper reaches of River Vindelälven, wasstudied in September during the pre-spawning period. The fish migrate from down- orupriver lakes for spawning in the river and data was collected by habitat mapping andradio-telemetry. Habitat selection of fish was analysed with preference curves andstatistical modelling, using the physical variables; depth, stream velocity and streambedsubstrate. Preference curves were derived by comparing fish habitat use with their nearbyavailable environment while the statistical modelling aimed to answer three main questions.1) Do the trout have a specific preference of depth, water velocity and streambed substrate?2) Is there any difference in habitat selection between sexes? 3) Is there a shift in habitatselection over time? The preference curves indicated that trout favored water depths of 1-2m, velocity compositions characterized as glides (c.

A current conveyor is an active building block that can be used to implement most active and passive components. It differs from the operation amplifier in that it uses current instead of voltage. The current conveyor also has significantly higher voltage gain over a broader frequency range. To simplify the construction of analogue circuits and increase the construction efficiency it is desirable to use a top-down methodology. This means that the whole system is partitioned into a hierarchy of subsystems.

This study examines the background and nature of the credit default index swaption (CDIS) and presentsrelevant methods for modelling credit risk. A CDIS is a credit derivative contract that gives the buyerright to enter into a credit default index swap (CDS index) contract at a given point in time. ACDS index, in turn, is a multi-name credit default swap (CDS). Within the eld of research, thisthesis identi es the CDIS pricing models presented by Jackson (2005), Rutkowski & Armstrong (2009)and Morini & Brigo (2011) as the most recognized and developed. These models are evaluated byreconstruction in a numerical software environment.

This paper presents an approach in contemporary, abstract art for a new way of experiencing modernist abstraction. This has not been possible until now, about 40 years after the postmodern turn against modernism in art, and the closely connected formalism. This new approach is represented in this paper by the Swedish contemporary artists Ann Edholm and Jacob Dahlgren. Modernist artists such as Kasimir Malevich and Piet Mondrian receives a new relevance to contemporary abstract art. This opens up for a new, more complex and more dialectical understanding and re-evaluation of modernism and its abstract art.This is shown by a historical and chronological investigation which highlights modernist abstract art, formalism, and the critical and post-modern Neo-geometric ?abstraction? of the eighties.

3D-modelling in AutoCAD This thesis is done in cooperation with LB-Hus in Bromölla, and have aimed to establish a digital AutoCAD model of one of the company?s house types and to find out what opportunities there are to do visualisations in the form of images directly from the programme. Modeling has been carried out so that the very construction of the house is included. Interiors and installations, with the exception of the ventilation system, have been left out in the model. The model has been created with solid models after a comparative study made between solid models and surface models to find out which option in this case was the easiest to handle and took up the least space.

Detta examensarbete har undersökt vilka möjligheter som skapas genom att använda BuildingInformation Modelling (BIM) för Livscykelkostnadsanalyser (LCCA). Arbetet beskriver förstLCCA och sedan hur BIM samt öppna standardiserade dataformat kan användas för LCCAoch för kvalitetssäkring av data. Till sist visas hur ett verktyg som räknar ut LCC direkt frånen byggnadsmodell kan utformas. Genom att kunna synliggöra konsekvenserna av olikalösningsalternativ och göra kvalitativa LCCA erhålls genomtänkta lösningar och medvetenhetom de framtida förvaltningskostnaderna. För en byggherre som också ansvarar för driften kandessa alternativsvärderingar och analyser leda till betydligt lägre förvaltningskostnader.