European cities of today are under the challenge to find ways to stay competitive and flourish in a rapidly changing world, where the old patterns of centrality and periphery not necessarily holds true. New and improved communication networks, a changed political geography in Europe, and the globalisation of not only the financial and industrial markets but also to a certain extent the globalisation of people, have all led to great challenges for cities and regions.In a changed spatial reality the classic monocentric models are challenged by newer models of urbanisation. The polycentric urban region is one such model which has been used to describe urban regions like the Randstad in the Netherlands and the Rhein-Ruhr region in Germany. Regions which lack the single dominant central city of the monocentric models of old, and instead shows a high degree of more equal-sized and sometimes more specialised cities in regional cooperation. The polycentric urban region is in that aspect a possible model for how other urbanised regions in Europe may act to be able to position themselves as attractive urban regions and regional hubs in the European urban network.Polycentric urban regions are not a universal solution, though.

This thesis is the result of the investigation and solution of a mechanicalproblem regarding flywheel malfunctions. A flywheel is, in short, a devicethat relies on a rotating object?s moment of inertia to store energy overshort time spans. This project is part of the development of a fourthflywheel prototype at the division for electricity at Uppsala university,which uses magnetic levitation to keep a hollow cylinder rotating at veryhigh speeds inside a vacuum chamber. Should the magnets fail however, orsome other error occur that leads to an uncontrolled state of rotation, thecylinder needs to be stabilized mechanically by a device usually referredto as ?back-up bearing?.

A piezoelectric injector was modeled, in this Master Thesis Project which was carried out at Scania CV AB in Södertälje, in GT-Fuel. GT-Fuel is simulation program from Gamma Technology.The simulation model for the piezo injector was divided into a hydro-mechanical system and an electrical system (Piezoelectric element). First the hydro-mechanic model was duplicated from Advance Continuous Simulation Language model (ACSL). The simulation results were then compared to the ACSL, to verify that the hydro-mechanical system was modeled correctly. The simulation results for the electrical model were also compared with a Simulink model.

Today small metal parts are mass-produced as for example rollers in cylinder bearings. At high velocity cutting the metal is cut with a great force in a scissor-like device. Both precision and repeatability is important to be able to guarantee good quality, but from an economical point of view it is also important to keep a great manufacturing capacity. The part of the process that is most time consuming is when the metal bar, that is about to be cut, is fed to the right position. Therefore it is interesting to examine if the time used for positioning can be reduced.

This thesis work has been performed at the department of diagnosis and dependability at Volvo Car Company, Torslanda. The background of this project is based on interest in ascertaining how different factors possibly can affect a diagnosis method, which has been developed to find leaks in the fuel tank and evaporation system. According to the OBD II requirements leaks with an orifice diameter larger or equal to 0,5 mm, must be detected. The idea of the diagnosis method is to create an over pressure in the system with an air-pump. The current through the pump is measured and correlates to the power consumed by the pump.

The purpose of this project was to evaluate how energy efficiently some of JM?s residential buildings can become in standard production. What kind of measures are needed to achieve the level of energy demand that is included in BBR12 (Boverkets Byggregler)? What measures are needed for achieving a lower demand so that the buildings could be classified as passive houses? The investigation has included a single family house and two different types of apartment blocks.The simulation programs Enorm and VIP+ have been used to calculate the energy demand of the buildings. The results from the programs have been compared with the measured energy demand for the three buildings.

Under våren och sommaren 2009 fick jag till uppgift att lära mig mer om HLA och hur man kan använda det för att integrera datorspel och simuleringar. Förr var simuleringar oftast stora specialskrivna program, skapade för att klara av en specifik simulering. Om man behövde förändra på något vis blev man tvungen att skriva om hela simuleringen. Nu med HLA har man fått en standardisering på hur man ska bygga upp simuleringar och vad dessa måste klara av att göra. HLA är alltså en arkitektur för hur man ska koppla ihop flera mindre simuleringar (federater) till en stor simulering (federation).

This master thesis is made of two parts. The first part concerns the method and results ofdesigning a motion control system for a piece of research-equipment called BIRGIT. Theequipment is made to be used for research on eyemovements. In the second part, a computermodel of a part of the balance organ in the inner-ear is developed. The work has been done atthe Bernadotte laboratory at S:t Erik Eye Hospital.The equipment the control system is made for is a so-called rotationchair.

To achieve the requirements to decrease emissions of greenhouse gases by 20 % by 2020, Swedenneeds to increase its use of bioenergy. In doing so it seems natural that those who already haveaccess to large amounts of biofuels in the form of by-products such as straw, wood chips anddigestible materials take advantage of these assets locally. By combining production of heat withpower production at the farm it may be possible to not only reduce the direct use of fossil fuel forheating but also reduce energy costs.The purpose was to simulate different cases of using a small scale biofueled combined heat andpower plant for farm-based systems. A MatLab-model was developed and used to draw conclusionsabout the costs for production of heat and electricity with different conversion technologies.The model uses climate data to simulate the variations in heat energy demand on a day-to-day basis.The given heat demand is the base of the simulation and from this the possible electric output iscalculated. This study has focused on the impact of the following properties: electric-, heat- andtotal efficiency, fuel, fuel price and specific fuel requirements.

Denna uppsats handlar om vilka olika kunskapsformer som testas i skriftliga prov i geografi på gymnasiet och om hur detta förhåller sig till betygskriterierna. För att besvara detta har tio geografilärares prov analyserats med hjälp av Blooms reviderade taxonomi. Tidigare forskning visar att prov i SO-ämnen nästan enbart testar minneskunskaper. Denna studie bekräftar delvis detta då de analyserade proven domineras av frågor som testar att minnas. Samtidigt finns det en variation i vilka kunskapsformer som testas.

AbstractSAAB has for a long time used user controlled pilot models in ARES. ARES is a simulation tool used in the desktop environment for simulations and calculations of the JAS 39 Gripen fighter and other aircraft. ARES stands for ?Aircraft Rigid body Engineering Simulation?. To work with these pilot models has been both time-consuming and inefficient.

Based on laboratory studies with lysimeters, the concentrations of dissolved reactive phosphorus(DRP) and particulate phosphorus, which is the main part of other P (OVRP), has been studied inpercolating water. The experiment was conducted through irrigation of small soil columnscontaining clay topsoil from an experimental field in Västergötland. Three rain simulations wereconsecutively performed. DRP concentrations in the percolating water ranged between 0.2 - 0.3mg·Lclearly related to the phosphorus concentration in the soil, measured in a soil extract ofammonium lactate (P-AL). Concentrations of OVRP were relatively low and ranged between0.12 and 0.16 mg·Lwas not proven and the experiment may reflect how a relatively slow percolation of water mayrelease DRP.

Syftet med uppsatsen är att studera möjlig utveckling av kommunerna och tätorterna i Jönköpings, Kalmar och Östergötlands län fram till 2020, med utblickar mot framtiden. Bakgrunden till uppsatsen är de diskussioner som förs i Sverige kring nya regionkommuner, där sammanslagningar av befintliga län ska ske. I denna process är Östra Götland ett förslag för de tre länen och därför är det av intresse att studera hur dessa kan utvecklas i framtiden.För denna analys har tidsgeografiska utgångspunkter kombinerats med Christallers centralortsteori för att skapa ett tredimensionellt tillgänglighetslandskap. Detta har sedan legat som en viktig förklaringsgrund för hur tätorter utvecklas. Resultatet av uppsatsen visar att de som lyckats locka till sig nya invånare kan delas upp i huvudsak i tre grupper; pendelorter med goda kommunikationer till andra orter, förorter med kort avstånd till regioncentra eller residensstäder (undantaget Östergötland där både Linköping och Norrköping är tillväxtorter).

This report was written by Lisa Bengtson and Hanna Paradis and describes the degree thesis "Environmental impacts of solid waste treatment in the Metropolitan Region, Santiago, Chile ? a comparison between current system and incineration with energy recovery". The purpose of this thesis was to investigate if incineration with energy recovery could be motivated through an environmental perspective as an alternative to landfilling of solid waste in Santiago, Chile. The study was performed with Life Cycle Analysis as a theoretical base. In Santiago, situated in the thirteenth region of Chile, Región Metropolitana, lives 6,5 million inhabitants. The major part of the solid waste produced in the region is landfilled on three different sanitary controlled landfills situated outside the city center.

Flooding events are no longer rare, floods occur all over the world. Accordingly, it is vital for the society and different authorities to work with flood mapping. To meet the goal of Uppsala kommun to map the risks of floods in Uppsala län, a map of the different areas around Funboån which are inside the area of risk for flooding have been developed.In the work, cross sections and the water flow have been measured. Moreover, an echo-sounding have been carried out in Funboån to map the bottom topography. From the bottom map and laser scanned data covering the study area, a terrain model was created.