The pdf is excluding images, because of uncertainties regarding copyrights. Instead I have put links for each picture so you may find them on the Internet. For a list of links to the online sourcematerial, please visit http://del.icio.us/Cyborguppsats.

This Master of Science thesis was completed at the Department of Machine Design at the Royal Instituteof Technology in Stockholm in collaboration with Lund Faculty of Engineering, Luleå University ofTechnology and Stanford University. At Stanford University a global product development project wasrealized as part of the course ME310. The project was initiated by the American company ImmerseGlobal whose vision was to develop a new type of Atmospheric Water Generators, a machine that absorbsthe moisture in the air and via a water system transforms it to pure drinking water. The project was partlyfinanced by the Product Innovation Engineering program, a Swedish research and development programfor increased innovation capability in organizations.In parallel with the global project in the ME310 course the product development process was studied inorder to compare it with a product development course at the Royal Institute of Technology, IPU. Thetwo courses are similar to each other in several aspects.

Telemedicine is the use of information and communication technology to provide clinical health care at a distance. This approach is usually adopted to bridge the distance in rural settings, but it is also a method to meet demographical and economical challenges. Västerbotten, a sparsely populated county with an ageing population, is in leading edge when it comes to telemedicine. The purpose of this report was to examine the diffusion and the inventory of telemedicine in the county council of Västerbotten from a geographical perspective. To gain a deeper understanding of diffusion and inventory of telemedicine, my purpose was also to examine these processes from an international and national perspective.

AbstractCorporate cultures have since the 80's, when the phenomenon was associated with a company's economic success, been a frequent research object. Corporate culture is then often described as something that can create efficiency, success and loyal employees. Often discussed about strong corporate cultures are that members in the organization have accepted the same norms, values and goals. Research also mention unique corporate cultures, where no organization is alike, depending their different stories, leaders, backgrounds or geographical locations.?? This study aims, through observations and interviews on an ethnographic basis, to describe the corporate culture in Stena Bulk.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

Syftet med detta examensarbete är att vidareutveckla glasfiberbalkar så de kan användas som mellanbjälklag i småhus. Förebilden var ett ?Delta Deck? som utvecklats av Altakor Group och används i brokonstruktioner. Denna profil har vi sedan modifierat och optimerat för bruk i småhus. Den största skillnaden är att vi valt att inte använda den så kallade ?snap-fit?-tekniken.

With the huge amount of computers connected to the Internet the IP-addresses are starting to run out. The Internet Engineering Task Force, IETF, have decided that it is about time to exchange the old 32 bits Internet protocol, Ipv4, to a more modern 128 bits protocol called Ipv6. This thesis explores the possibility to install Ipv6 in different operating systems. By testing various operating systems and by set up criteria compare them to each other we give the reader a picture of how the installation is done. We also show which operating systems to prefer if you want to use IPv6.

This report describes the scientific work of designing and manufacturing an intelligent controller module prototype for automobile trailer connections. The functions of the module are both to drive the lamps and detect failures. The module also contains functions to handle other functions of the trailer. To learn about controller modules the group does extensive feasibility study.The group receives three already existing modules, the functions of the three modules are studied and tested in the lab, this is done too get a overview of the construction. The method used I called reversed engineering, a way of constructing by analyzing constructions already done.When the modules are analyzed, the functions of the prototype are tested and designed without copying the analyzed modules.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

Island har perfekta förutsättningar för att utvinna geotermisk energi. Det är beläget på den mittatlantiskaryggen mellan två aktiva plattor som interagerar med den hotspot som ligger under Island. Formandet av jordskorpan i området är komplex, hotspoten och manteln produce- rar tillsammans stora mängder magma som har gjort att jordskorpan har blivit mer mäktig oceanskorpan. Dessa parametrar gör Island till ett land med unika dynamiska system som ger de bästa förutsättning- arna för att kunna utvinna samt förse sin befolkning med geotermisk energi.  I denna studie är det främst två vulkaner som undersöks, Krafla och Hengill som ligger på norra respektive sydvästra Island.

Over an extended period of time there have been plans to establish a shared facility in Lennheden to extract groundwater from the Badelunda esker to provide drinking water for the cities of Borlänge and Falun. The city of Falun is dissatisfied with the quality of its drinking water and the city of Borlänge is concerned about the risk of contamination of its existing groundwater supply at its current location. To provide a basis for a decision on this issue, the company Midvatten AB has been commissioned to perform hydrogeological investigations in the area of Lennheden.The purpose of this thesis is to design a functional groundwater model of the area between Lennheden, place of planned extraction, and Övre Tjärna, place of existing extraction, to get a better understanding of the groundwater situation in the area. A groundwater model enables simulations of different scenarios in risk assessment and contaminant transport. The aim of the thesis is that the model can be used as an aid in Midvatten?s investigations in Lennheden and that it also can be used in future projects in the area.The model has been made in Processing Modflow 5.3 and encompasses an area of 19,5 × 11 km along the Badelunda esker and the river Dalälven between Djurmo and Frostbrunnsdalen.

Through this thesis, we want to discuss how the marginalization of people, several precedent political, city planning- and engineering decisions resulted in a catastrophic outcome after hurricane Katrina in New Orleans 2005. We also put forward a case study of the Make It Right Foundation, to demonstrate how the residents of the Lower Ninth Ward are involved in the urban development of their community. We would like to draw attention to the power of citizens and how they can influence the urban development of a community after a trauma. This study also focuses on the mission of The Make It Right Foundation: which is to rebuild the Lower Ninth Ward with firm concepts on sustainable development where all dimensions are accounted: ecological, social, cultural and economic. The empirical data was collected by a field study in New Orleans 2010-03-22 and semistructured interviews were made during the same days..

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

Due to their complexity and heavy wear from rail traffic, switches are a sensitive part of the railway infrastructure and moreover expensive to maintain. Furthermore, increasing railway traffic not only accelerates the wear rate but also obstructs the necessary maintenance measures. This paper examines the opportunities for a transition to a long-term maintenance strategy in the Swedish railway network. It contains a study of the maintenance strategy of Banverket, and also analyses statistics of errors in the railway infrastructure. The survey was completed utilising interviews with infrastructure managers, maintenance contractors, planners of railway operations and the Banverket material service department.

This study investigates whether the site index curve method (SICM) and the growth intercept method (GIM) can be used for site index predictions in younger Norway spruce (Picea abies (L.) Karst.) stands than recommended by current guidelines. For SICM it was thus investigated whether the method could be used for stands younger than ten years, and for GIM it was tested whether a starting point for the intercept measurements could be used below the recommended 2.5 meter. This was tested based on measurements taken from experimental stands in Tönnersjöheden Research Forest. For GIM it was found that the method can only be used when the TH-trees of a stand have five complete intercepts above 2.5 meters. For the method to be applicable beyond this, it will be necessary to adapt the underlying equations, perhaps following the Canadian example where a 1.3 meter intercept start is used. In conclusion it is not currently possible to apply the approach beyond the current recommendations. For SICM, SI predictions are accurate for the study area already form year three.