Syftet med undersökningen var att ge en bild av hur studenter i en högskoleutbildning på distans upplever sitt lärande. Fokus har lagts på den eventuella kopplingen mellan studenternas yrkeserfarenhet/yrkespraktik och deras lärande i en utbildning. Undersökningen utgår ifrån ett kvalitativt forskningsperspektiv och ett fenomenologiskt synsätt. Den empiriska undersökningen genomfördes i form av intervjuer med fem studenter som utbildar sig till lärare inom förskola och förskoleklass. Intervjuerna bearbetades och analyserades utifrån undersökningens syfte och frågeställningar och utmynnande i ett antal övergripande områden och teman.

The purpose of this master thesis was to study the water system for mechanically cleaned water at Skärblacka mill, in order to find and evaluate possibilities of using energy more efficiently. The thesis also includes an evaluation of the software tool ?Pumpanalys?Skärblacka mill produces pulp and paper. The large amount of water required is cleaned mechanically through filters and called mechanically cleaned water (MR0). The MR0 water is pumped out to the factory by four crude water pumps.

Previous research has established coaches' important role in developing elite athletes (Durand, Bush, Thomson & Salmela 1996). Athlete enhancement and assisting athletes achieve ?peak performance? has been a major objective for elite coaches as well as sports scientists (Williams & Kendall, 2007) Despite this common goal, research also question whether sports scientists and the research they pursue really effects coaches knowledge and constitute a foundation for today and tomorrows athletic performances (Bishop 2008).  This study examined elite coaches? needs and use of sport science research as well as the interaction between elite coaches and sport scientists. Following interviews of ten elite coaches, content analysis revealed that sport science is both a formal and informal resource of knowledge for coaches. Development of athletes is seen as the main objective of research retrieval and personal and/or direct contact with the sport scientist is considered to be the best way to assemble.

The purpose of this study was to investigate the problems of building a new region in the Southeast part of Sweden. The idea of a big south Swedish region is brand new; no former studies in this area have been done before. The main analytical focus of this study is legitimacy, identity and democratic credentials. The study has been carried out by interviews with several leaders in organizations working with the collaborations of the smaller regions in to the big region. The method of this study has been a single-case study and dialogue interviews.

The attitudes towards nature conservation in forestry are based on the individual forest owner. The theme of the interviews is the opinion on nature conservation in forestry. The purpose of this study is to identify if there is any difference in attitude to nature conservation in forestry according to the age of the forest owner. The study discusses different factors that affect the private forest owners consideration of nature conservation and give an insight in different generations attitude to nature conservation. Other topics that are discussed is if future change of generation will change the consideration of nature conservation in Swedish forestry and what is needed to enhance the interest in nature conservation among forest owners.This study is the result of interviews with a number of forest owners in the county of Uppsala, Sweden.

Teenagers are the group that spends most money on clothing. When choosing clothes, the so called internal and external signals could affect the perceived quality of the teenagers. The external signals are for example price, brand and place of purchase while the internal signals are the physical composition of the product as for example garment and size. The perceived quality is the attributes that the teenagers perceive that the specific article of clothing has. Today?s marketing, within the fashion line, is mostly to present the design of the product and aim the marketing for curtain segments and to keep a distance to others that are not within the segment group.

This thesis describes the redesign ofequipment designed for drying bags thatis used in Fresenius Kabis´manufacturing of their nutritionmedicine in Uppsala. The need of thistask arise during the start of thedevelopment of a new packaging line werethis equipment were meant to be used. Anevaluation of the bagdryers capacity andcapability was necessary.The work started with gathering ofinformation from suppliers of the usedcomponents and from the responsibleengineers for this equipment. Aneducation to learn how the equipmentworked and how to operate it were taken.That was followed by the creation of astudy plan were the tests were plannedto test different parameters effect onthe drying result and to see if thebagdryer managed to handle the bags ofthe correct format in the pace that theequipment should be designed for.The test results detected a need ofdesigning a unit with a function thatholds the bags in place while passingthrough the dryer in order to attainhigh quality results. The results werelater used for optimization of thedesign.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

Syfte: Syftet med den här uppsatsen är att öka förståelsen för hur organisationer kan arbeta med flexibla arbetsformer. Vi vill belysa vilka konsekvenser som kan uppstå med flexibla arbetsformer och hur de påverkar organisationer. Vi önskar även att fylla gapet vi uppmärksammat i forskningen kring flexibla arbetsformer ur ett organisatoriskt perspektiv.    Metod: Uppsatsen är en kvalitativ studie med en induktiv ansats som behandlar fenomenet flexibla arbetsformer ur ett organisatoriskt perspektiv. Datainsamlingen för studien har skett genom sju kvalitativa intervjuer på Kalmar kommun. Slutsats: Slutsatsen av studien har visat att organisationer arbetar med flexibla arbetsformer utifrån olika förutsättningar delvis i form av; tekniska förutsättningar, ständig förändring av arbetsmarknaden, konkurrens samt de anställdas förutsättningar.

The Swedish energy system will be influenced by many future changes, such as energy and climate policy objectives. The installation of more renewable electricity could increase by using solar energy. Over the recent years, grid-connected photovoltaic (PV) systems have increased dramatically in Sweden, partly due to various support systems and compensation models. These support systems have been designed to make it easy for individuals and businesses to invest in self-generated electricity and thus contribute to the transformation of the energy system.The introduction of a higher proportion of solar energy may in turn affect the Swedish electricity system. This could mean that the electricity companies will be facing a number of changes in the near future.

The amount of electricity is limited in Namibia and the large distance between towns andvillages complicates the energy supply in the country. Therefore an alternative way to provideaccess to appropriate energy technologies is needed. The Government of the Republic ofNamibia (GRN) has adopted an approach of helping off-grid households by establishing EnergyShops in each region in Namibia and these shops are going to sell basic renewable energy andenergy efficient products. The Renewable Energy Efficiency Institute in Namibia (REEEI), theinitiator of this thesis, is coordinating the establishment of these Energy Shops.The main purpose of this thesis was to examine the needs of energy products for the Namibianpopulation and develop an assessment method for the Energy Shop in how to select appropriateenergy products already on the world market. The purpose was also to develop a method forchoosing an Energy Shop.

In published studies it is found that the fuel consumption on a forwarder is relatively constant, on time basis. A certain variation between different sizes of forwarders occurs as well as between different working elements. The aim of the study was to establish a forwarders comparatively fuel consumption when driving on road and in the terrain, loaded and unloaded, with high and low gear and with high and low speed as well as with hydrostatic and hydrodynamic transmission. A hypothesis was that low rpm gives lower fuel consumption on distance basic, at all trials. The test driving was made with a Hemek 750 which is a three geared hydrostatic machine and with a Hemek 700 which is a hydrodynamic machine with six gears.

The following project has been made in collaboration with, Denator AB, a biotechnology enterprise. One-dimensional electrophoreses have been used to analyze protein contents of tissue samples. Tissue samples have been either treated according to the company´s newly developed tissue treatment technique or not treated at all and comparisons between these samples have been made. In order to see differences in protein patterns between samples more clearly, a conversion method has been developed where electrophoresis gel visual patterns are used to produce curves, similar to densitometer curves.Denator AB would like to know if the proteins in their treated samples will change visibly over 48 h when incubated at room temperature. This has been investigated using the above mentioned method.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

The use of spread spectrum signals has increased dramatically in military applications. Finding methods for detecting and positioning of these signals have become interesting research areas for signal intelligence purposes. One method is to measure the time difference of arrival (TDOA) that occurs when two receivers are synchronous and spatially separated. Based on the TDOA-technique an audio-demonstrator has been developed and implemented. This report describes the theory for how sound received in microphones can be used to extract information about the transmitter?s position from the measured time difference.