Wavecraft AB develops medical equipment for heating of organic synthesises. The heating is done with microwaves, which improves the process in both speed and accuracy compared to the more traditional methods where heating elements are used. This report discusses the developement of an automatic lid mechanism for one of Wavecraft's product prototypes. The company assumes that the final product will be integrated by customers into fully automated systems, and the upgrade from a manually to an automatically controlled lid is therefore an important step in the product's developement process.The first stage och the project was an idea generation process. The ideas generated here were organized into five different concepts of which the best one was selected through the use of a concept matrix.

När man som TV-tittare ser på sportprogram, kan man lätt förledas att tro att ?alla människor? tycker sport är viktigt, men så är det naturligtvis inte. Man kan dock anta att framställningar av medierad TV-sporten som fenomen, finns i de flesta människors föreställningsvärld. Utgångspunkten för den här uppsatsen är att placera in TV-sport i ett större sammanhang, där TV-sport kan ingå som en del av det som människor tar del av och som i viss mån inverkar på hur individer formar och skapar sin identitet. Den här uppsatsen handlar om hur kön (re-) presenteras genom TV-sport och hur detta kan ingå i vad som konstruerar en könsidentitet för en yngre generation av den kvinnliga TV-publiken.

This thesis is carried out on behalf of watermixer manufacturer Ostnor AB in Mora.The thesis deals with the area of Article Bound Instructions (ABI) at the company'sassembly department, regarding the layout and management routines involved withthese instructions.In the current situation there are problems with no uniformity in the manner in whichthe ABI is written, then referred to both the civil structure, images and specificityrates in the text.Another problem is that operators do not make use of the ABI that are available inthe current situation, and that there are no clear procedures for who has theresponsibility to write, update and change these ABI.During this work has several people that were identified as key personnel of thethesis held in order to get a handle on how the current situation of the variousobjects of the work looks like, and to examine different desires about the future ofthese should look like from the different subjects perspectives been interviewed.During the work, a number of deficiencies, including that the current program that isused to write the ABI, Lotus Notes, do not possess near the prerequisites for being asimple program to deal with when writing the ABI, which is a condition since wishesare about to put the responsibility for the ABI generation to the departmentsoperators, since their main task is to assemble and do not bother with a program in acomputer.The result of this work has generated new layout and structure of the ABI, designedto be used continuously in the assembly for evaluation, routines regardingresponsibility of the ABI for the Department of Production Engineering (PT),procedures for how the ABI should be written regarding amount of detaileddescriptions in the text and use of pictures.In addition, proposals for further work and improvements has been developed basedon experience during the work and presented at the end of the report..

How do young adult students communicate through their smartphones today? Which applications and features do they choose? What motivates their choices for the various possible situations? In this paper we investigate which communication channels young adult students in Sweden use for private message communication in their smartphones, in what way they use the channels and why they choose specific channels for different types of communication. In Sweden today, there are numerous of different ways of communicate through smartphones. We have interviewed ten Swedish young adult students regarding their use. The results speaks for that SMS has proven to still be used very frequently, even though it has existed for many years and that there are plenty of other ways to communicate through private messages today.

Jag blev under min utbildning introducerad i smidets värld och där är jag kvar. Jag har velat fördjupa mina kunskaper att smida tillsammans med barn men underlaget som finns är tunt. Jag har även märkt under mina VFU perioder att metalldelen i skolan inte får det utrymme som den förtjänar. Varpå syftet med mitt arbete har varit att ta reda på hur man kan belysa smidets kulturtradition, hur man kan arbeta med smidet i skolan och visa varför metallslöjden förtjänar större utrymme inom ämnet trä- och metallslöjd. Metoden för att söka svar på mina frågor består av litteraturstudier inom ämnet samt intervjuer med lärare i grundskolan som undervisar i smide.

The aim of this inquiry was to investigate the most appropriate measures to reduce noise impacts from road traffic on the Nydala recreational area in Umeå municipality due to the planned re-routing of the E4 motorway to an existing road along this area. The sound environment is an important part in the experience when we are visiting recreational areas. Noise is not only disturbing; the liberty from unwanted sounds also allows us to perceive natural sounds that are a benefit for the cultural experience. Therefore it is important to take actions to protect this well used area from traffic noise. The reasonable options to avoid noise impact in this case are to lower the speed limit, using a noise reducing coating or use noise protection screens and walls.

In a world where digital media is becoming a greater part of people?s everyday and working lives it is plausible to assume that the upcoming generation of pupils expect the teaching media to adapt thereafter. It is this assumption of an increased demand that Natur & Kultur is hoping to be able to meet. This thesis has been a stage in the process of producing digital material in the subject of mathematics for high school students. Specifically the aims of this thesis have been to make a rough description of the largest competitive companies? products within the same market, explore and put together a brief theoretical foundation of contemporary research and produce concrete examples of ideas for digital applications.

This thesis is carried out on behalf of watermixer manufacturer Ostnor AB in Mora.The thesis deals with the area of Article Bound Instructions (ABI) at the company'sassembly department, regarding the layout and management routines involved withthese instructions.In the current situation there are problems with no uniformity in the manner in whichthe ABI is written, then referred to both the civil structure, images and specificityrates in the text.Another problem is that operators do not make use of the ABI that are available inthe current situation, and that there are no clear procedures for who has theresponsibility to write, update and change these ABI.During this work has several people that were identified as key personnel of thethesis held in order to get a handle on how the current situation of the variousobjects of the work looks like, and to examine different desires about the future ofthese should look like from the different subjects perspectives been interviewed.During the work, a number of deficiencies, including that the current program that isused to write the ABI, Lotus Notes, do not possess near the prerequisites for being asimple program to deal with when writing the ABI, which is a condition since wishesare about to put the responsibility for the ABI generation to the departmentsoperators, since their main task is to assemble and do not bother with a program in acomputer.The result of this work has generated new layout and structure of the ABI, designedto be used continuously in the assembly for evaluation, routines regardingresponsibility of the ABI for the Department of Production Engineering (PT),procedures for how the ABI should be written regarding amount of detaileddescriptions in the text and use of pictures.In addition, proposals for further work and improvements has been developed basedon experience during the work and presented at the end of the report..

Publit är ett litet företag med stora ambitioner. Efter bara fyra år på marknaden servar man nu enmajoritet av de största svenska förlagen (och en lång rad mikroförlag) med e-boktjänster ochbehovstryck.Användaren får tillgång till Publits tjänster via en webbapplikation som i stora drag har tre vyer;analys, ekonomi och katalog. Den sistnämnda rymmer ett förlags utgivning av fysiska ochelektroniska böcker och låter användaren göra allt från att skanna en fysisk bok eller konvertera enPDF till e-bok, till att publicera sina böcker i en lång rad kanaler och välja priser ochaffärsmodeller.Publits katalogvy har en rad brister. Det har varit vår uppgift att fullt ut förstå och kartlägga dessa.Den processen har bedrivits i form av iterativt skissande varvat med design-kritik-möten.Resultatet kan ses i två perspektiv. För vår egen del består det av ett mycket stort antal skisser somillustrerar vår process.

Denna studie berör områdena participatory design, speldesign samt idégenerering och syftar till att undersöka hur spelföretag interagerar med sina slutanvändare vid speldesign samt om participatory design kan användas i speldesign för att främja känslor av delaktighet och ägandeskap. Studien har genomförts med intervjuer och undersökningar i form av en analys av fyra svenska spelföretags hemsidor och sociala medier för att se på deras interaktion med sina slutanvändare vid speldesign, samt en participatory designworkshop. Resultaten från litteraturstudien och workshopen visar på att participatory design kan användas för att främja känslor av delaktighet och ägandeskap hos deltagarna. Vidare visar undersökningen av de svenska spelföretagen att interaktionen med sina slutanvändare över lag är låg. De slutsatser som studien visar på är att genom att erbjuda sina användare möjligheten att bli delaktiga och att interagera med spelföretaget så får man en aktiv och stimulerande miljö vilken gynnar både spelföretaget och deras slutanvändare. Vad gäller participatory design så visar studien att det är ett förhållningssätt som går att använda inom speldesign. Vidare så visar det också sig att, om behovet för att välja ut mellan flera olika metoder och tekniker inom participatory design uppstår, så är ett ramverk ett mycket användbart och hjälpsamt verktyg..

It is important for firms to continually develop their offerings as the business landscape develops in order to sustain their competitiveness (e.g. Schumpeter, 1934; Ansoff, 1979; Porter, 1985; Trott, 2012). In a context of globalization, rapid technology development and changing customer needs, the paper packaging industry is urged to enhance its product development activities (Hansen & Niskanen, 2007; Björkdahl & Börjesson, 2011). However, there is little research about paper packaging firms? product development processes (ibid).

Syfte: Studien unders?ker skolledningens perspektiv i skolors arbete med olika h?lsofr?mjande aspekter g?llande fysisk aktivitet och h?lsosamma matvanor p? skolor i varierande socioekonomiska omr?den. Metod: Denna tv?rsnittsstudie anv?nder b?de kvantitativ och kvalitativ metod f?r att unders?ka sekund?rdata som h?mtats fr?n Generation Peps verktyg Pep Skola. Statistiska tester av kvantitativ data har gjorts f?r att unders?ka om det finns skillnader i arbetet med att fr?mja fysisk aktivitet och h?lsosamma kostvanor i skolor med h?gt socioekonomiskt index (SEI) j?mf?rt med l?gt SEI. Det har ocks? unders?kts om det skiljer sig ?t i arbetet med fysisk aktivitet j?mf?rt med h?lsosam kost.

This master?s degree project concerns the combination of a multi dwelling passive house with solar energy for the generation of electricity and domestic hot water (DHW). Different alternatives with either solar thermal systems or photovoltaic (PV) systems are compared with two reference alternatives producing DHW from electricity or district heating. The economical comparison uses a life cycle cost (LCC) perspective based on the present value of expenditures for investment, energy and annual operating and maintenance.The energy yields from the solar energy systems were calculated by hand and with simulation software. Calculation and dimensioning of PV systems were carried out with a software called PVSYST.

Recent turmoil surrounding nuclear power as an energy source, especially since the accidentat Fukushima, has largely contributed to the debate of whether or not nuclear power should beused as an energy source. This study has examined the economic feasibility of replacingForsmark?s 3rd nuclear reactor with a bio fueled power plant, and find out how this could bedone.The power generation that has to be replaced is equal to 1170 MWe. To replace this, 6 largescaleCFB-boilers, each providing over 200 MWe, were necessary. In addition to this, eachboiler required their respective turbine sets, comprising one high-pressure-, and one lowpressureturbine with intermediate reheating capacities.Based on this, a rankine-cycle was modeled using the software EES, to be able to calculatethe total heat required in the power plant.

The purpose with the work is to study Fortums activities with hydro power plants, dams and reservoirs mainly in a premise jurisdictional perspective and to show how GIS would be a helpful tool for the future.A great deal of the information that the Generation Hydro-division at Fortum are managing have a spatial element. That means that it is possible to spatially join this information to a geographical polygon, line or point. This information is today gathered from several different sources, such as files, paper maps and digital data of several kinds. A Geographic Information System (GIS), as and aid besides the ordinary tools should be an effective support in the everyday work with questions of a premise jurisdictional nature.The goal of this work is to account for how to organize, present and analyse geographic information. We will show how to link from the map to traditional tools such as calculation- and register programs.