This thesis describes a tool for data mining used to optimize ambulance preparedness. The goal with the tool was that it should be able to retract the information necessary to be able to analyze and calibrate the preparedness model used in the software ResQMap. ResQMap is used by SOS Alarm, who are responsible for the Swedish emergency number 112, as a decision support tool for ambulance operators. It is developed by Carmenta AB, who are the supervisors of the thesis work. Also, a minor study of the preparedness models variables has been performed in order to be able to evaluate the function of the tool.

Comfort analyses regarding human induced vibrationsIt is not too common among civil engineers in Sweden to perform comfort analyses considering the vibrations caused by human activities. In addition, the Swedish standards lack requirements to be used for comfort analyses in design of floor-systems. The demand for large spans in combination with slender slabs, is today a reason to investigate the floor-system constructions, in order to prevent disturbing vibrations and oscillations.The purpose of this thesis is to create a guide for how a comfort analysis, considering vibrations, should be implemented. Göran Svedenbjörk who is an expert in structural dynamics has been interviewed where he presents his latest project Värtaterminalen and answers some questions about vibrations due to human activities.Floor-systems, consisting of concrete slabs supported by steel or concrete beams, have been investigated with simulations in the finite element program Abaqus. In the simulations, the influence of various factors on the natural frequency of floor-systems and the acceleration level caused by dynamic loads, is studied.

The Swedish Cellulosa Companiy, SCA, has today 280 000 ha planted with lodgepole pine (Pinus contorta var. latifolia) (?C?) which is equivalent to 14 % of its total forest area. Exotic lodgepole pine has in previous experimental stands shown a superior growth than the native Scots pine (Pinus sylvestris L.) (?S?).But also the comparison could be questioned because stand histories were was unknown and also differences in age between C and S existed.

Background: Investors have several options to choose from when the goal is to achieve the highest yield at the lowest cost and risk. Stocks are a common investment options, but is also associated with risks. Portfolios are usually constructed with several different assets to reduce the unsystematic risk of investment. Funds are similar to composite stock portfolios, the big difference is that they dealt with in their entirety and investors may not affect the fund's content. The problem remains that whether you choose stocks or mutual funds there is still uncertainty as to how the future will unfold.

Like many small-time companies there is a need to improve the flow of materials at HSP-Gripen AB. The company develops and manufactures hydraulic-powered grapples for the machine- and forest industry. By mapping the material flow in the current production and gathering necessary data, suggestions on how different parts of the production could be controlled is presented in this dissertation. This has been achieved by the study of relevant scientific literature. The suggested ways of controlling the production consist of 2-bin systems, hybrid material flow system as well as a cyclic product-planning.

Historically transformers with system earth equipment have been modeled as open circuits in zero sequence. This approximation has been satisfying, but lately it has been discovered that equipment on one side of the transformer have responded to faults that occurred at the other side. Most of these problems took place when the majority of the system on the secondary side of the transformer contained cables. These findings have led to questioning whether or not the former model of the transformer in zero sequence is correct. This report investigates if it is necessary to represent the transformer in zero sequence in another way than it is usually done today.

The aim of this project has been to raise the production efficiency of Daliff Precision Engineering through reduced transportation time and a more standardized manufacturing process. The problem has upraised because of a big and diversified product flora without any standard products and with just small batches ordered. The report also tries to show the work procedure with general analytical methods and be an example of how a similar problem can be resolved. The transportation time is being proposed to be reduced through a change in the layout of the factory. By moving a few manual machines, dispatch and burring to more efficient locations, the total transportation time will be reduced by 55 %.

Today we can create digital 3D models which can be realised almost instantly through production methods such as 3D printing and computer controlled milling.What if this same technology could be applied to the development and construction of terrain parks?With snow as the material tools could be developed using similar principles to design and sculpt the surface, only on a larger scale.How would terrain park designers adapt their process to use this new technology? In this Industrial design thesis I explore how the ideas of the terrain park designer can be expressed through such a system with focus on the designers knowledge and skill without the need to learn complicated 3D programs.Sketch, create, ride. .

Background: The relation between work motivation and well-being are relatively well theoretically entrenched, but few studies have been conducted on nurses within psychiatry. Objective: The aim of the present study was to examine the differences in intrinsic work motivation (autonomy, competence, relatedness), mental health and burnout between young (?40 years) and older (>40 years) nurses employed in psychiatry. Method: The study was an observational study with a cross-sectional design and group comparisons, conducted as a survey. The sample constituted of 60 employed nurses.

Many dairy farms doesn?t keep their bull calves and cross cow calves, they sell them to breeders instead of raising them their self. It should be possible for the dairy farmers to do it them self?s. There is also a possibility to bread one calf from the cross heifers. The purpose of the investigation was to see if there is any economic possibility to breed beef cattle. I have used the same sample farm trough the hole study, because it would be easier to fallow the study.

The objective of this study was to study the agreement between two methods of indirect bloodpressure measurement in dogs and cats and to establish the within-method variation for the methods. The utility and practicality in the clinical setting were also evaluated for the both methods. The techniques evaluated were the oscillometric method and the Doppler ultrasonographic method. Thirtytwo dogs and 26 cats were used in the study and seven dogs and five cats out of these animals had diseases that may effect the bloodpressure. Bloodpressure was measured in both anesthetized and in conscious animals.

This thesis project focuses on the need for better tools for analyzing competition for forest fuels in Sweden, in particular how policy measures may influence the market and involved actors in different regions of Sweden. Raw materials from the forest have for long constituted important inputs in the Swedish forest industry. Today some of these raw materials are increasingly used as inputs also in bioenergy production, largely driven by bioenergy promoting policies, and there are signs of increased competition for forest fuels which may have various and uncertain effects on the industries in question. The thesis project explores the possibilities to adapt previously used forest sector equilibrium models into a new model suitable for analysis of Swedish forest fuel markets, called the Swedish Forest Sector Trade Model (SFSTM). The approach takes into account regional differences in supply and demand for 23 types of products produced and/or used by eight types of producers, plus consumers, in five different regions (four Swedish and one international).

This report is about Adobe Acrobat 3D and their new PDF format witch can contain 3 dimensional models that are interactive. The purpose is to find out if the program and the format work in a level that is suitable for the market. To create this PDF you need Acrobat 3D installed on your computer but it only needs Acrobat Reader 7 or 8 to open it, and the Reader is free to download on the internet.The examination is focusing on four formats: U3D, 3DS, DWG and DXF because they are the most common in the building industry seen from the architects? way. From a 3D model exported to these four formats they where converted to PDF in different settings to be compared in different points as information and size of the files.

The purpose of this study was to investigate different relations between the damages of falls and background variables as well as the relation between the falls and the weather condition to later be able to use this report to expand the knowledge among workers at VTI about the pedestrian fall injuries. All of the fall injuries in the data that this study is based on have occurred in Sweden during the time period between January 2003 and December 2011.To be able to answer the questions that this report is based on several statistical methods are used. The statistical methods that have been used during the making of this report are multiple linear regression, binary logistic regression, correlation analysis, association analysis and descriptive statistics as well as visual analysis.The results of the study show that women around menopause age have a tendency to get a big increase in the amount of injuries compared to men of the same age. The study also suggests that men on average tend to have a lower level of injury compared to women.Age also seems to affect both the amount of injuries and the level of injury negatively. The study suggests that the most likely reason for this is both that the intake of ?Fall Risk Increasing Medicine?, which is medicine that increases the drowsiness, is higher among older individuals as well as lower estrogen levels among older women and lower amount of testosterone among older men, which causes a loss of bone density in both sexes.The weather seems to have a strong effect on how many injuries occur but also a noticeable effect on the scale of the injury.

This project in an in depth exploration about the basics of creating space in the form of an experimental investigation using my own perceptions as reference. Within a method, especially outlined for the project using descriptive words of opposites, my interpretation of the words has been formed into models of rooms. Four workshops with restrictions and rules acted as a platform for the striving towards the aim of a wider understanding of how space can be experienced. Through analysis I have formulated the different parameters influencing space itself and my perceptions of it. During the project a language for visualizing the interpretations of a room has been further evolved.